• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.216-217
• /
• 1999

A tapered ridge mode laser diode with increased spot size is designed and analyzed . The mode evolution concept is applied to design the taper and the method does not require regrowth or multiple-step etching technique. Three-dimensional BPM results show that the designed taper can transfer more than 97% of the mode power in the active region to the expanded mode.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.47-53
• /
• 2007

The laminar combustion characteristics of interacting coal particles in a convective flow are numerically investigated at particle arrangement and size difference. The numerical simulations, which use the two-step global reaction model to account for the surrounding gas effect, show the detailed interaction among the inter-space particles, undergoing devolatilization and subsequent char burning. Several parametric studies, which include the effect of the gas temperature (1700 K), high pressure(10 atm) and variation in geometrical arrangement of the particle diameter on the volatile release rate and the char combustion rate, have been carried out. The comparison indicates that the shift to the multiple particle arrangement resulted in the substantial change of the combustion characteristics and that the volatile release rate of the interacting coal particles exhibits a strong dependency on the particle spacing and size difference.

• Journal of information and communication convergence engineering
• /
• 제10권3호
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.536-541
• /
• 2001

A high resolution digital cinematic Particle Image Velocimetry(PIV) has been developed. The system consists of a high speed CCD camera, a continuous Ar-ion laser and a computer with camera controller. To improve the spatial resolution, we adopt a Recursive Technique for velocity interrogation. At first, we obtain a velocity vector for a larger interrogation window size based on the conventional two-frame cross-correlation PIV analysis using the FFT algorithm. Based on the knowing velocity information, more spatially resolved velocity vectors are obtained in the next iteration step with smaller interrogation windows. The correct velocity vector at the first step is found to be critical, so we apply a Multiple Correlation Validation(MCV) technique in order to decrease the spurious vectors. The MCV technique turns out to improve SNR(Signal to Noise Ratio) of the correlation table. The developed cinematic PIV method has been applied to the measurement of the unsteady flow characteristics of a Rushton turbine mixer. A total of 3,245 instantaneous velocity vectors were successfully obtained with 4 ms time resolution. The acquired spatial resolution corresponds the performance of the conventional high resolution digital PIV system using a $1K{\times}1K$ CCD camera.

• 정보처리학회논문지D
• /
• 제11D권7호
• /
• pp.1483-1490
• /
• 2004

소프트웨어분야에서 성공적인 프로젝트를 완수하기 위해서는 프로젝트를 완수하는데 필요한 개발노력이 정확히 추정되어야 한다. 그러나 이러한 개발노력은 소프트웨어의 크기나 여러 가지 운영환경의 영향으로 인해 프로젝트에 따라서 총 개발 노력의 규모는 차이가 있다. 일반적으로 기존의 연구는 개발노력을 추정하기 위하여 소프트웨어 규모인 기능점수(FP ; Function Point)를 이용하였다. 본 연구를 위해서 1990년대에 개발된 789개의 소프트웨어 개발 프로젝트들에 관련된 데이터를 이용하였다. 실험을 통해서 개발노력에 영향을 미치는 변수를 조사하였다. 또한 변수사이에 선형적인 관계를 조사하기 위하여 다중회귀분석을 실시하였다. 이 경우 전체의 데이터를 이용하는 것이 아니라 프로젝트 인도비율(PDR ; Project Delivery Rate : Hours/FP)을 다단계로 나누어서 각 단계별로 개발노력에 영향을 미치는 변인을 찾아내고 가장 이상적인 회귀식으로 도출하였다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1535-1542
• /
• 2001

A high resolution digital cinematic Particle Image Velocimetry(PIV) has been developed. The system consists of a high speed CCD camera, a continuous Ar-ion laser and a computer with camera controller. To improve the spatial resolution, we adopt a Recursive Technique for velocity interrogation. At first, we obtain a velocity vector fur a larger interrogation window size based on the conventional two-frame cross-correlation PIV analysis using the FFT algorithm. Based on the knowing velocity information, more spatially resolved velocity vectors are obtained in the next iteration step with smaller interrogation windows. When the correct velocity vector at the first step is found to be critical, a Multiple Correlation Validation(MCV) technique is applied to decrease the spurious vectors. The MCV technique turns out to improve SNR(Signal to Noise Ratio) of the correlation table. The developed cinematic PIV method has been applied to the measurement of the unsteady flow characteristics of a Rushton turbine mixer. A total of 3,245 instantaneous velocity vectors were successfully obtained with 4 ms time resolution. The acquired spatial resolution corresponds to the conventional high resolution digital PIV system using a 1K ${\times}$ 1K CCD camera.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2087-2089
• /
• 2003

The presence of narrowband interference (NBI) in Direct-sequence code division multiple access (DS/CDMA) systems is an inevitable problem when the interference is strong enough. The improvement in the system performance employs by adaptive narrowband interference suppression techniques. Basically there have been two types of method for narrowband interference suppression estimator/subtracter approaches and transform domain approaches. In this paper the focus is on the type of estimator/subtracter approaches. However, the binary direct sequence (DS) signal, that acts as noise in the prediction process is highly non-Gaussian. The case of a Gaussian interferer with known in an autoregressive (AR) signal or a digital signal and also in a sinusoidal signal (Tone) that included in is paper. The proposed NBI suppression is presence in an adaptive IIR notch filter for lattice structure and more powerful by using a variable step-size algorithm. The simulation results show that the proposed algorithm can significantly increase the convergence rate and improved system performance when compare with adaptive least mean square algorithm (LMS).

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.152-159
• /
• 2005

본 논문에서는 스텝 크기(step size)를 자동적으로 조절함으로써 빠른 수렴비와 낮은 초과 MSE를 갖는 TS(Tagaki-Sugeno) 퍼지 모델과 ISI에 강하고 위상변화에 둔감한 CMA(constant modulus algorithm)를 접목시킨 새로운 퍼지 확률 기울기(Fuzzy Stochastic Gradient) 알고리즘을 제시하고 비이상적인 전송채널에 의해서 발생한 왜곡을 보상함으로써 수신 측에서 비트 검출 오류를 감소시키기 위하여 국내 지상파 디지털 TV의 표준으로 되어 있는 VSB 방식에 적용 가능한 등화기(equalizer)를 구현하였다.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.293-298
• /
• 2011

본 논문에서 광대역 코드분할 다중접속 무선 중계기에서 간섭제거를 위한 새로운 CMF(Constant Modulus Fourth) 알고리즘을 제안한다. CMF 알고리즘은 고정 계수 알고리즘인 CMA(Constant Modulus Algorithm)를 수정한 것으로서, 스텝 사이즈를 적절하게 조절함에 따라 개선된 성능을 보이게 된다. 제안된 CMF 알고리즘에서 스텝사이즈가 0.35인 경우 수렴상태에서 평균 자승 에러는 기존 CMA 알고리즘보다 약 4 dB정도 더 낮다. 그리고, 평균 자승 에러 -25dB를 기준으로하면 LMS(Least Mean Square)와 NLMS(Normalized Least Mean Square)보다 반복회수가 400~1100번 정도 줄어든다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.141-148
• /
• 1994

In order to improve the productivity of cold forging at low production cost, an integrated system's approach is necessary in handling the material preparation and the optimum process design, considering the forming machines, tooling, and operation including quality control. As the first step toward this approach, an expert system for multi-stage cold forging process design for fasteners with various head geometries is developed using Prolog language on IBM 486 PC. For effective representation of the complex part geometries, the system uses the multiple element input, and the forward inference scheme in determination of the initial billet size and intermediate forging steps. In order to determine intermediate steps, the basic empirical rules for extrusion, heading, and trimming were applied. The required forming loads and global strain distributions at each forging step were calculated and displayed on the PC monitor. The designed process sequence drawing can be obtained by AutoCAD. The developed system will be useful in reducing trial and error of design engineers in determining the diameter and height of the initial cylindrical billet from the final product geometry and the intermediate necessary sequences.