• Archives of Pharmacal Research
• /
• v.15 no.3
• /
• pp.246-250
• /
• 1992

Acetaminophen (AAP) and ranitidine (RT) were coadministered orally to nine rats, and the possible contribution of the gastric emptying to the plasma concentration profiles of them was examined. The drugs showed multiple plasma peaks similar to the respective ones after separated administration of each durg. IT Implies that there is no significant interaction between AAP and RT in terms of the gastric emptying or drug absorption. There were no significant linear correlations of the peak patterns (peak height and peak time) between AAP andd RT. It is contrary to the expectation from the biphasic gastric emptying (BGE) theory previously suggested for AAP and RT. The BGE theory. Therefore, seemed to have some draw-backs in explaining satisfactorily the multiple plasma peaks of AAP and RT. Two more doubts raised previously against the BGE theory were also discussed.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.4
• /
• pp.201-213
• /
• 1991

There are many drugs reproted to show unusual pharmacokinetic behavior by producing a significant secondary peak in the plasma concentration-time curve after oral administration. The drugs are ranitidine, cimetidine, acetaminophen, aspirin, furosemide, bumetanide, piretanide, veralipride, sobrerol, penicillamine and doxycycline etc. Enterohepatic circulation-, two absorption site-, biphasic gastric emptying-, tissue deposition- and multi-fraction absorption theories have been suggested for the mechanisms of this phenomenon. Here, the theories were reviewed and critisized for their validity as a possible mechanism of the multiple peak phenomenon.

• Archives of Pharmacal Research
• /
• v.13 no.2
• /
• pp.180-186
• /
• 1990

A bioequivalence study of ranitidine tablets was conducted according to the Korean Guidine for the Bioequivalence Test using twelve healthy male subjects. The plasma concentration-timecurves of ranitidine from the test and reference tablets showed profound multiple peak phenomenon in each subject as reported earlier. However, the area under the plasma concentration-time curve (AUC) and the maximum ploasma concentration at the first peak ($C_{max1}$) of the two preparations was proven to be equal when analyzed satistically according to the criteria of the guidline;i. e., statistical power (1-$\beta$)was calculated to be over 0.8 under the condition of $\alpha$ = 5% and $\Delta$(minimum detectable difference) = 20%, and the confidence interval of the difference in AUC at 95% confidence level was in the range of $\pm$ 20%, which statisfied the criteria of bioequivalence. Equivalence of the peak concentration of ranitidine at the second peak ($C_{max2}$), and the time to reach the first ($T_{max1}$) and second verify the bioequivalence of $c_{max2}$ , $T_{max1}$ and $T_{max2}$ between the two tablets. However, we conclude that the test and reference tablets are bioequivalent taking the therapeutic characteristics of the ranitidine preparations into consideration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.12
• /
• pp.992-995
• /
• 2011

The optical properties of ZnO thin film, being treated by O-plasma, have been studied using Photoluminescence(PL) spectroscopy with the change of temperature from 10 K to 290 K. Two characteristic peaks were identified at 10 K : 3.357 eV($D^{\circ}X$) and 3.324 eV(TES). The peak of $D^{\circ}X$ is believed to be due to neutral donor bound excitons where the donor is in the ground state. However, the TES(Two Electron Satellite) peak indicates the excited state of the donor(excitation energy was ~30 meV). The donor binding energy was estimated to be 44 meV, which indicates the possible presence of the neutral donor bound excitons at RT. The thermal effect including thermal broadening was identified from temperature evolution of the spectrum. Both the peak intensity and the peak energy have decreased as the temperature increases. As the temperature approaches to RT, the two peak merges into one broad peak, which is considered a combination of multiple peaks having different physical origins.

• YAKHAK HOEJI
• /
• v.42 no.4
• /
• pp.431-436
• /
• 1998

The pharmacokinetics of CKD-602, a new camptothecin anticancer derivative, were studied in mice, rats and dogs following a single or multiple intravenous administration, and the following results were obtained. The blood levels of CKD-602 declined in biphasic fashions with peak plasma levels $(C_0)$ of $2.63{\mu}g/ml$ in mice, $2.27{\mu}g/ml$ in tumor bearing mice, $2.84{\mu}g/ml$ in rats at a dose of 20mg/kg, and of 0.02mcg/ml in dogs at a dose of 0.5mg/kg. The plasma half-lives $(t_{1/2}{\beta})$ were 9.55hr in mice, 9.94hr in tumor bearing mice, 9.98hr in rats and 12.75hr in dogs. AUC of CKD-602 was increased linearly with the dose at a range from 5 to 20mg/kg. Moreover, Cltot and Vdss were also not significantly changed with increasing the dose. On the other hand, after 5 daily intravenous bolus injection of CKD-602 (5mg/kg) in rats, $t_{1/2}{\beta}$, AUC and MRT of CKD-602 were 11.90hr, $3.19{\mu}g{\cdot}hr/ml$, and 11.61hr, respectively, which were slightly higher than after the single bolus injection.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.741-755
• /
• 1995

Currently titanium is the material of choice for implants because of its biological acceptance. This high degree of biocompatibility is thought to result, in part, from the protective and stable oxide layer that presumably aids in the bonding of the extracellular matrix at the implant-tissue interface. Endosseous dental implants are interfaced with bone, connective tissue, and epithelium when implanted into the jaw bone. The soft tissue interface including connective tissue and epithelium is one of the most critical factors in the determination of implant maintenance and prognosis. For maintenance of failing or failed implants, it is essential to treat the implant fixture surface to remove bacterial endotoxins and make a surface tolerated by surrounding soft and hard tissues. In this study, the effect of mechanical treatment on titanium plasma sprayed implant on adhesiveness and proliferation of human gingival fibroblasts and changed surface characteristics were studied. titanium plasma sprayed discs manufactured by Friedrichsfeld company were treated with loaw speed stone bur, a rubber point and a jetpolisher. Its surface components were analyzed with Energy dispersive X-ray spectroscopy to evaluate whether the surface characteristics were altered or not. To observe the spreading pattern of the human gingival fibroblasts which attached to the all specimens author used the scanning electron microscope. The results were as follows : Pure titanium and plasma sprayed titanium, stone polished titanium showed titanium peak and small amout of aluminum, so there was no alteration on surface characteristics. Under the scanning electron microscopic examination in the initial attachment of human gingival fibroblast, there was a slight enhancement in pure titanium, stone polished titanium than plasma sprayed titanium. After 6 hours, the pure titanium and stone polished titanium showed human gingival fibroblasts were elongated and connected with numerous processes. Human gingival fibroblasts were more intimately attached on the pure titanium discs than on the other discs. The human gingival fibroblasts attached on the plasma sprayed titanium by thin and elongated processes. After 24 hours, the human gingival fibroblasts connected with each other via numerous processes and compeletly covered the pure titanium and stone polshed titanium discs. Human gingival fibroblasts had multiple point contacts with more long and thin lamellopodia and showed a little bare surface on plasma sprayed titanium discs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1141-1149
• /
• 2013

Dimensional analysis is an important tool for developing mathematical models of physical phenomena in order to understand the effects of laser shock peening(LSP) process parameters. By using the Bucking ${\prod}$ theorem, we proposed an applicable dimensional analysis method to verify the effects of LSP process parameters on the residual stresses. Furthermore, by using finite element analysis, we proposed a finite element method of LSP and discussed various parameters, such as peak pressure, pressure pulse duration, laser spot size, and multiple LSPs.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.100-108
• /
• 2023

In this study, a neural network model inspired by a one-dimensional convolution U-net is developed to automatically accelerate edge localized mode (ELM) detection from big diagnostic data of fusion devices and increase the detection accuracy regardless of the hyperparameter setting. This model recognizes the input signal patterns and overcomes the problems of existing detection algorithms, such as the prominence algorithm and those of differential methods with high sensitivity for the threshold and signal intensity. To train the model, 10 sets of discharge radiation data from the KSTAR are used and sliced into 11091 inputs of length 12 ms, of which 20% are used for validation. According to the receiver operating characteristic curves, our model shows a positive prediction rate and a true prediction rate of approximately 90% each, which is comparable to the best detection performance afforded by other algorithms using their optimized hyperparameters. The accurate and automatic ELM-burst detection methodology used in our model can be beneficial for determining plasma properties, such as the ELM frequency from big data measured in multiple experiments using machines from the KSTAR device and ITER. Additionally, it is applicable to feature detection in the time-series data of other engineering fields.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001).

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)