• Journal of Chest Surgery
• /
• v.45 no.2
• /
• pp.110-115
• /
• 2012

Background: Pneumonectomy remains the ultimate curative treatment modality for destroyed lung caused by tuberculosis despite multiple risks involved in the procedure. We retrospectively evaluated patients who underwent pneumonectomy for treatment of sequelae of pulmonary tuberculosis to determine the risk factors of early and long-term outcomes. Materials and Methods: Between January 1980 and December 2008, pneumonectomy or pleuropneumonectomy was performed in 73 consecutive patients with destroyed lung caused by tuberculosis. There were 48 patients with empyema (12 with bronchopleural fistula [BPF]), 11 with aspergilloma and 7 with multidrug resistant tuberculosis. Results: There were 5 operative mortalities (6.8%). One patient had intraoperative uncontrolled arrhythmia, one had a postoperative cardiac arrest, and three had postoperative respiratory failure. A total of 29 patients (39.7%) suffered from postoperative complications. Twelve patients (16.7%) were found to have postpneumonectomy empyema (PPE), 4 patients had wound infections (5.6%), and 7 patients required re-exploration due to postoperative bleeding (9.7%). The prevalence of PPE increased in patients with preoperative empyema (p=0.019). There were five patients with postoperative BPF, four of which occurred in right-side operation. The only risk factor for BPF was the right-side operation (p=0.023). The 5- and 10-year survival rates were 88.9% and 76.2%, respectively. The risk factors for late deaths were old age (${\geq}50$ years, p=0.02) and low predicted postoperative forced expiratory volume in one second (FEV1) (< 1.2 L, p=0.02). Conclusion: Although PPE increases in patients with preoperative empyema and postoperative BPF increases in right-side operation, the mortality rates and long-term survival rates were found to be satisfactory. However, the follow-up care for patients with low predicted postoperative FEV1 should continue for prevention and early detection of pulmonary complication related to impaired pulmonary function.

• Journal of Trauma and Injury
• /
• v.23 no.2
• /
• pp.170-174
• /
• 2010

Purpose: As techniques and instruments for video-assisted thoracic surgery (VATS) have been evolving, attempts to perform VATS for chest trauma have been increasing. Several studies have demonstrated the feasibility and safety of VATS for thoracic trauma. We reviewed our experience to evaluate the clinical feasibility and safety of VATS for thoracic trauma. Methods: Fifty-two patients underwent thoracic surgery for chest trauma in Asan Medical Center from January 1990 to December 2009. VATS was performed in 21 patients who showed stable vital signs. We reviewed retrospectively the medical records of those patients to investigate the results of VATS for thoracic trauma. Results: Thoracic exploration for chest trauma was performed in 52 patients. There were 46 males (88.5%) and 6 females (11.5%). The median age was 46.0 years (range: 11~81 years). There were 39 blunt and 13 penetrating traumas. A standard posterolateral thoracotomy was performed in 31 patients, and VATS was tried in 21 patients. We performed successful VATS in 13 patients; 11 males (84.5%) and 2 females (15.5%) with a median age of 46.0 years (range: 24~75 years). The indication of VATS was persistent intrathoracic hemorrhage in 10 patients and clotted hemothorax in 3 patients. There were no complications, but there were two mortalities due to multiple organ failure after massive transfusion. In 8 patients, VATS was converted to a standard posterolateral thoracotomy for several reasons. The reason was inadequate visualization for bleeding control or evacuation of the hematoma in 5 patients. In 3 patients, VATS was performed to evaluate diaphragmatic injury. After the diaphragmatic injury had been confirmed, a standard posterolateral thoracotomy was performed to repair the diaphragm. Conclusion: VATS should be safe and efficient method for diagnostic evaluation and surgical management of stable patients with thoracic trauma.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.13-22
• /
• 2007

This study was carried out to scrutinize possibility of manufacturing pitch pine (Pinus rigida) glued laminated timber in order to add values of pitch pine trees. Also, it was investigated to improve bending performance of pitch pine glulam. Pitch pine was imported as one of major plantation species in Korean peninsula. Machine stress rated grades of pitch pine lumber mostly ranged between E7 and E9. which grades were more or less inferior to producing high quality glulam. However, the adhesive properties between pitch pine and pitch pine, and between pitch pine and Japanese larch (Larix kaempferi Carr.), such as shear bond strength, wood failure rate and de-lamination rate of bonded layer submerged in cold and boiling water, were higher than Korean Standard criteria. These properties are essential for manufacturing glulam with single species or multiple species. The modulus of rupture (MOR) of pitch pine glulam exceeded the criterion of Korean Standard for glulam strength grade but modulus of elasticity (MOE) was lower than the criterion. On the other hand, the bending performances (MOR and MOE) were improved 20 percent by mixing with Japanese larch laminar. It is effective to arrange higher quality Japanese larch laminar at the outer layer of glulam for improving bending performances. In conclusion, it is possible to use low quality pitch pine as laminar of structural glulam for adding values of pitch pine.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001).

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.213-223
• /
• 2008

The objective of this study was to compare dentin shear bond strength (DSBS) of dentin bonding agents (DBAs) cured with a plasma arc (PAC) light curing unit (LCU) and those cured with a light emitting diode (LED) LCU. Optical properties were also analyzed for Elipar freelight 2 (3M ESPE); LED LCU, Apollo 95E (DMT Systems); PAC LCU and VIP Junior (Bisco); Halogen LCU. The DBAs used for DSBS test were Scotchbond Multipurpose (3M ESPE), Singlebond 2 (3M ESPE) and Clearfil SE Bond (Kuraray). After DSBS testing, fractured specimens were analyzed for failure modes with SEM. The total irradiance and irradiance between 450 nm and 490 nm of the LCUs were different. LED LCU showed narrow spectral distribution around its peak at 462 nm whereas PAC and Halogen LCU showed a broad spectrum. There were no significant differences in mean shear bond strength among different LCUs (P > 0.05) but were significant differences among different DBAs (P < 0.001)

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.6
• /
• pp.545-559
• /
• 2002

There has been increasing use of IPS Empress $2^{(R)}$ owing to easy fabrication method, high esthetics similar to natural teeth, good marginal accuracy, and sufficient fracture strength. However, in clinical application, although a luting agent and the tooth cementation bonding procedure influence the marginal accuracy and fracture strength restoration, there has been a controversy in the selection of proper luting agent. This study was to measure the marginal fidelites and fracture strength of IPS Empress crowns according to three cement types, Protec $cem^{(R)}$, Variolink $II^{(R)}$ and Panavia $21^{(R)}$. After construction of 12 experimental dies for each group, IPS Empress $2^{(R)}$ crowns were fabricated and luted the metal master die prepartion of the maxillary right premolar. Marginal gaps before cementation and after cementation were measured. Buccal incline on the functional cusp of specimens were loaded until the catastrophic failure and fracture strength was measured. The results of this study were as follows: 1. The range of gap was $34.04{\pm}4.84{\mu}m$ before cementation and $37.88{\pm}5.00{\mu}m$ after cementation, which showed significant difference by paired t-test (p<0.05). The difference in the results from marginal accuracy according to measuring point proved to be not statistically significant by two-way ANOVA test (p>0.05). 2. The difference in the results from marginal accuracy according to three cement types Proved that The Variolink $II^{(R)}$ cement group had the least gap, $35.43{\pm}5.03{\mu}m$, and showed superior marginal accuracy while there existed statistic significance in Protec $cem^{(R)}$ cement group, $39.06{\pm}4.41{\mu}m$ or Panavia $21^{(R)}$ cement group, $39.16{\pm}4.39{\mu}m$ by two-way ANOVA test & multiple range test (p<0.05). 3. The difference in the results from fractures strength testing according to three cement type groups proved to be statistically significant (p<0.05). The Variolink $II^{(R)}$ cement group shows highest fracture strength of $1257.33{\pm}226.77N$, Panavia $21^{(R)}$ cement group has $1098.08{\pm}138.45N$, and Protec $cem^{(R)}$ cement group represents the lowest fracture strength of $926.75{\pm}115.75N$. 4. Three different cement groups of different components showed acceptable marginal fidelity and fracture strength. It is concluded that IPS Empress $2^{(R)}$ crowns luted using Variolink $II^{(R)}$ cement group had stronger fracture strength and smaller marginal gap than the other cement groups. Although Variolink $II^{(R)}$ resin cement seemed acceptable to clinical applications in IPS Empress $2^{(R)}$ system, the IPS Empress $2^{(R)}$ system still requires long-term research due to the lack of data in clinical applications.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1123-1142
• /
• 1998

Background : The frequency of MOTT has risen as the prevalence of tuberculosis has been declining. Our country has been also. The most of MOTT was resistant to the major anti-tuberculous drugs. Method : To compare clinical characteristics and frequencies of MDR tuberculosis with MOTT, the author studied 65 patients showing AFB culture positive with sputum. The data were collected from 176 patients who had been admitted at the National Masan Tuberculosis Hospital from May to June, 1997 to April, 1998. Result : The frequency of MDR tuberculosis was 43.1% and that of MOTT was 9.2%. Among 65 isolated mycobacteria, 3 cases were M. intracellulare. 2 cases were M. fortuitum, and 1 case was unidentified MOTT. The most frequent age group in 65 culture positive patients was 4th decade and the mean age was 44. The mean age was 61 in MOTT and 42 in M. tuberculosis and had significant difference(p<0.01). The numbers with past history of treatment were 2.3 in MDR tuberculosis and 1.7 in non-MDR tuberculosis and had significant difference(p<0.05). At the time of admission, the most frequent regimen for the treatment of MDR tuberculosis was 24 months regimen(85.7%) with the 2nd line anti-tuberculosis drugs. For non-MDR tuberculosis, 9 or 12 months regimen (72.9%) with the 1st line anti-tuberculosis drugs and had significant difference (p<0.01). At the time of admission, the symptom of weight loss was shown in 84.7% of M. tuberculosis and 50.0% in MOTT and there was significant difference(p<0.05) between them. All of the MOTT were identified to be resistant against INH and PAS. Drug resistance rates to INH, OFX(p<0.01) and PAS(p<0.05) in MOTT were higher than in MDR. All of three M. intracellulare strains were resistant to INH, RFP, PAS and OFX. All of two M. fortuitum strains were resistant to most anti-tuberculosis drugs. And the other MOTT was resistant to INH, EMB and PAS. Conclusion : MOTT was more common in elderly patients than M. tuberculosis. MOTT cases should be considered to be the probability of multiple drug resistance and treatment failure during the 1st treatment because they showed more resistance to anti-tuberculosis drugs than M. tuberculosis cases. Therefore, there should be more careful investigations for clinical characteristics, natural history of disease, and efficient management for MOTT.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.35-41
• /
• 1998

This study was carried out to investigate the development rates of human embryos co-cultured with cumulus cells to each blastocyst stage. Human zygotes were co-cultured on cumulus cell monolayer in YS medium supplemented with 20% hFF. On day 2, if patient had four or more "good" embryos (regular blastomeres without fragmentation), embryos were further cultured for 72hrs. Blastocysts on day 5 were classified into early blastocyst (ErB), early expanding blastocyst (EEB), middle expanding Blastocyst (MEB), and expanded blastocyst (EdB) on the basis of their morphological aspects of trophectoderm cells and blastocoele. Subsequently, maximum 3 of best blastocysts were transferred in 486 cycles. The results in this study were as follows: Patients who had four or more "good" embryos on day 2 were 498 persons, but patients whose embryos could not be transferred due to failure in development to the blastocyst stage on day 5 were 12 persons (2.4%). The development rate of embryos to the blastocyst stage was 58.2% (2,885/4,957) on day 5, and the rates that developed to the ErB, EEB, MEB, and EdB stage were 15.0% (743/4,957), 14.9% (739/4,957), 14.4% (714/ 4,957), and 13.9% (689/4,957), respectively. Total 1366 blastocysts were transferred in 486 cycles (mean number=2.81). The implantation rate and the ongoing implantation rate obtained by observing the number of G-sac and FHB were 29.9% (409/1,366) and 22.5% (308/1,366), respectively. The clinical pregnancy rate was 51.2% (249/486), and the ongoing pregnancy rate' was 39.1% (190/486). Among women showing ongoing pregnancy, women with singleton were 50% (95/190), women with twin were 37.9% (72/190), and women with triplet were 12.1% (23/190). Although triplet pregnancy rate in this study was high such as 12.1%, because many blastocysts with high viability were produced in our co-culture system using cumulus cells on day 5, we really believe that a multiple pregnancy except twin should not occur by selecting good embryos for maximum two blastocyst transfer. These results demonstrate that autologous cumulus cells may be used for the production of blastocysts with high developmental competence, and the use of autologous cumulus cells to be collected easily, and to be treated conveniently at OPU must be an effective means for obtaining high implantation and pregnancy rate.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.1
• /
• pp.3-11
• /
• 2003

Attention-deficit/Hyperactivity disorder(ADHD) is the most common psychiatric disorder of childhood and among the most prevalent chronic health conditions affecting school-aged children. Children with ADHD experience significant functional problems, such as school difficulties, academic underachievement, troublesome interpersonal relationships with family members and peers, and low self-esteem. The most widely used pharmacological treatments for ADHD are psychostimulants, such as methylphenidate and amphetamine salts. These medications provide clinical efficacy by increasing the availability of catecholamines, primarily dopamine, in the frontal lobe of the brain. immediate-release(IR) formulations of sychostimulants were among the most effective psychotrophic medications in the psychopharmacological treatment. However, there are some limitations of IR formulations：the short half-life and duration of efficacy, which result in the need for multiple daily dosing and the poor compliance. These limitations have led to the development of once-daily, extended-release(ER) formulations of methylphenidate and amphetamine salts. However, these ER formulations may not be as immediately helpful to ADHD children due to delayed onset of action and the acute tolerance which is the failure to sustain the efficacy with the same concentration of drug as the initial stage of medication. OROS-methylphenidate(Concerta$^{\circledR}$) given once a day produces an ascending-pattern plasma drug level generated by the osmotically released, timed drug-delivery system. These new formulations of the psychostimulants have been shown to be a useful alternative to old stimulant medications through the evidence by the clinical trials.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.73-87
• /
• 1996

The mechanical properties of 2D ceramic composites fabricated bythe newly developed powder infiltration and subsequent multiple impregnation process were characterised by both 3-point flexure and tensile tests. These tests were performed with strain gauge and acoustic emission instrument. The woven fabric composites used for the test have the basic combinations of $Al_{2}$$O_{3}$ fabric/$Al_{2}$$O_{3}$ and SiC fabric (Tyranno)/SiC. Uniaxially aligned SiC fibre(Textron SCS-6)/SiC composites were also tested for comparison, The ultimate flexural strength and first-matrix cracking stress of SiC fabric/SiC composite with 73% of theoretical density were about 300 MPa and 77 MPa respectively. However, the ultimate tensile strengths of composite were generally one third of flexural strengths, and first-matrix cracking stress in a tension test was also much lower than the value obtained from flexure test. The lower mechanical properties measured by tension test were analysed quantitatively bythe differences in stressed volume using Weibull statistics. This showed that the ultimate strength and the firs-tmatrix cracking stress of woven laminate composites were mainly determined bythe gauge length of fibres and the stressed volume of matrix respectively. Incorporation of SiC whiskers into the matrix increased first-matrix cracking stress by increasing the matrix failure strain of composites.