• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 춘계학술발표대회
• /
• pp.842-845
• /
• 2009

Wireless ad hoc networks often suffer from rapidly degrading performance with the number of user increases in the network. One of the major reasons for this rapid degradation of performance is the fact that users are sharing a single channel. Obviously, the problem of using single shared channel schemes is that the probability of collision increases with the number of nodes. Fortunately, it is possible to solve this problem with multi-channel approaches. Due to the especial properties of multiple channels, using the multiple channels is more efficient than single channel because it enhances the capacity of the channel and reduces the error rate during data transmission. Some multi-channel schemes us one dedicated channel for control packets and one separate channel for data transmissions. On the other hand, another protocols use more than two channels for data transmissions. This paper summarizes six multiple channel protocols based on these two kinds of schemes. Then we compare them and discuss the research challenge of multiple channel protocols.

• 한국통신학회논문지
• /
• 제31권6A호
• /
• pp.563-574
• /
• 2006

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing) 기반 다중 안테나 시스템의 링크레벨 성능 분석을 위하여 실제 전파 환경과 유사한 특성을 갖는 Ray-tracing 방식 채널의 하나인 SCM(Spatial Channel Model) 채널을 구현한다. 3GPP & 3GPP2 Spatial Channel AHG(Ad-hoc Group)에서 시스템레벨 성능 비교용으로 제안한 SCM 채널을 링크레벨 성능의 비교 분석을 위하여, 본 논문에서는 시스템레벨 채널에 대한 채널 계수 및 파라메터들을 링크레벨 성능 비교용으로 변환하여 구현한다. 모의실험을 통하여 구현한 SCM 채널의 특성을 검증하고, 이를 이용하여 기존의 OFDM 기반 MIMO (Multiple Input Multiple Output) 적용 시스템 및 스마트 안테나 적용 시스템에서의 실제적인 링크레벨 성능을 분석하고, 정확한 비교 검증을 위하여 SCM 채널과 동일한 파라메터를 적용한 I-METRA 채널 및 독립 채널 상황에서의 링크 레벨 성능을 함께 비교 분석한다. MIMO 및 스마트 안테나 적용 시스템에 대하여 여러 채널 환경에서 채널 상관도에 따른 링크레벨 성능을 분석함으로써, 채널 상관도의 영향에 따라 주어진 환경에 적합한 다중 안테나 시스템을 제안한다.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.1029-1042
• /
• 2017

A joint channel estimation and data detection technique for a multiple input multiple output (MIMO) wireless communication system is proposed. It combines the least square (LS) training based channel estimation (TBCE) scheme with sphere decoding. In this new approach, channel estimation is enhanced with the help of blind symbols, which are selected based on their correctness. The correctness is determined via sphere decoding. The performance of the new scheme is studied through simulation in terms of the bit error rate (BER). The results show that the proposed channel estimation has comparable performance and better computational complexity over the existing semi-blind channel estimation (SBCE) method.

• 한국음향학회지
• /
• 제26권8호
• /
• pp.426-431
• /
• 2007

본 논문에서는 수중 채널 환경에서 초음파 통신의 성능 및 효율을 향상시키기 위하여 MIMO(Multiple Input Multiple Output) 용 수중 벡터 채널 모델링을 연구하였으며, 이를 이용한 MIMO 기법의 성능을 분석하였다. 수중 MIMO 채널 모델링을 위하여 실해역 환경에서 측정을 수행하였으며, 측정된 데이터를 분석하여 수중 채널 환경에서의 페이딩, 도플러, 시간지연, 도달각, 수신전력 등의 파라미터 값을 추정하였고, 이를 이용한 MIMO용 수중 벡터 채널 모델링을 수행하였다. 또한 제안된 채널 모델링을 이용하여 수중 MIMO 시스템의 성능을 분석하였으며, 성능 분석 결과 수중에서 MIMO 기법을 사용하는 경우 같은 SNR에 대해 비트 에러 율이 크게 감소함을 알 수 있었다.

• Journal of Communications and Networks
• /
• 제16권4호
• /
• pp.447-457
• /
• 2014

In this paper, we investigate the frequency domain channel estimation for multiple-input multiple-output (MIMO) single-carrier frequency-division multiple-access (SC-FDMA) systems. In MIMO SC-FDMA, code-division multiplexed (CDM) pilots such as cyclic-shifted Zadoff-Chu sequences have been adopted for channel estimation. However, most frequency domain channel estimation schemes were developed based on frequency-division multiplexing of pilots. We first develop a channel estimation error model by using CDM pilots, and then analyze the mean-square error (MSE) of various minimum MSE (MMSE) frequency domain channel estimation techniques. We show that the cascaded one-dimensional robust MMSE (C1D-RMMSE) technique is complexity-efficient, but it suffers from performance degradation due to the channel correlation mismatch when compared to the two-dimensional MMSE (2D-MMSE) technique. To improve the performance of C1D-RMMSE, we design a robust iterative channel estimation (RITCE) with a frequency replacement (FR) algorithm. After deriving the MSE of iterative channel estimation, we optimize the FR algorithm in terms of the MSE. Then, a low-complexity adaptation method is proposed for practical MIMO SC-FDMA systems, wherein FR is performed according to the reliability of the data estimates. Simulation results show that the proposed RITCE technique effectively improves the performance of C1D-RMMSE, thus providing a better performance-complexity tradeoff than 2D-MMSE.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.205-215
• /
• 2006

In this paper an optical power meter using Hadamard transform, which can be used in multiple channel optical elements alignment system, is proposed. A traditional optical power meter in multiple channel optical elements alignment system is able to judge how well the elements are aligned each other by measuring optical power of the first and the last two channels with at least two detectors. It has critical drawback that the alignment accuracy per channel is dependent on the number of detectors. The proposed optical power meter can get noise reduction by the Hadamard transform based multiplexing technique. The Hadamard transform based multiplexing technique using spatial light modulators is distinguished by the best enhancement of signal-to-noise ratio (SNR) for the reconstructed signals. Moreover, the noise reduction increases with increasing the order of multiplexing, namely the number of optical element channels. The proposed system is implemented by PDLC (Polymer Dispersed Liquid Crystal) mask which is operated by electric filed and generates optimal multiplexing patterns based on the Hadamard transform and single detector. It means that we obtain not only the each channel's optical power of multiple channel elements at once but also the best enhancement of SNR with single detector. Experimental results show that the proposed optical power meter is suitable for an active optical alignment system for multiple channel optical elements.

• Journal of Communications and Networks
• /
• 제18권6호
• /
• pp.884-891
• /
• 2016

The wireless mesh network (WMN) has attracted significant interests as a broadband wireless network to provide ubiquitous wireless access for broadband services. Especially with incorporating multiple orthogonal channels and multiple directional antennas into the WMN, each node can communicate with its neighbor nodes simultaneously without interference between them. However, as we allow more freedom, we need a more sophisticated algorithm to fully utilize it and developing such an algorithm is not easy in general. In this paper, we study a joint channel assignment, link scheduling, routing, and rate control problem for the WMN with multiple orthogonal channels and multiple directional antennas. This problem is inherently hard to solve, since the problem is formulated as a mixed integer nonlinear problem (MINLP). However, despite of its inherent difficulty, we develop an algorithm to solve the problem by using the generalized Benders decomposition approach [2]. The simulation results show the proposed algorithm provides the optimal solution to maximize the network utility, which is defined as the sum of utilities of all sessions.

• 한국정보과학회논문지:정보통신
• /
• 제34권5호
• /
• pp.396-404
• /
• 2007

본 논문에서는 다수의 라디오와 채널을 사용하는 무선 애드혹 통신망에서 대역폭 측정을 기반으로 호 접속 제어와 연동되는 애드혹 라우팅 프로토콜을 제안한다. 단일 라디오에 단일 채널을 사용하는 기존 애드혹 노드와 달리 제안한 MCQosR(Multiple Channel Quality of Service Routing) 프로토콜에서는 각 노드가 다수의 채널과 라디오를 사용하여 노드사이에 전이중 통신을 가능하게 하고 경로의 내부 간섭을 감소시켰다. 또한 각 노드마다 수신전용의 고정된 채널을 갖도록 하였으며, 대역폭 측정을 기반으로 새로운 호에 대한 수락제어를 수행함으로써 QoS 제공을 가능하도록 하였다 제안된 프로토콜은 시뮬레이션을 통하여 성능을 검증하였다.

• Journal of Communications and Networks
• /
• 제12권5호
• /
• pp.411-432
• /
• 2010

We consider three different secure broadcasting scenarios: i) Broadcast channels with common and confidential messages (BCC), ii) multi-receiver wiretap channels with public and confidential messages, and iii) compound wiretap channels. The BCC is a broadcast channel with two users, where in addition to the common message sent to both users, a private message, which needs to be kept hidden as much as possible from the other user, is sent to each user. In this model, each user treats the other user as an eavesdropper. The multi-receiver wiretap channel is a broadcast channel with two legitimate users and an external eavesdropper, where the transmitter sends a pair of public and confidential messages to each legitimate user. Although there is no secrecy concern about the public messages, the confidential messages need to be kept perfectly secret from the eavesdropper. The compound wiretap channel is a compound broadcast channel with a group of legitimate users and a group of eavesdroppers. In this model, the transmitter sends a common confidential message to the legitimate users, and this confidential message needs to be kept perfectly secret from all eavesdroppers. In this paper, we provide a survey of the existing information-theoretic results for these three forms of secure broadcasting problems, with a closer look at the Gaussian multiple-input multiple-output (MIMO) channel models. We also present the existing results for the more general discrete memoryless channel models, as they are often the first step in obtaining the capacity results for the corresponding Gaussian MIMO channel models.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.