• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.223-227
• /
• 2002

Polymeric multi-mode optical waveguides were fabricated for parallel optical interconnection. Waveguide structures were molded by a Ni mold master using a hot embossing technique. The Ni mold master was manufactured by LIGA process. Multimode optical waveguides with a 48$\times$47 ${\mu}{\textrm}{m}$$^2$cross-section were produced by a simple two-step process. The propagation losses of the multimode waveguide measured at 0.85 ${\mu}{\textrm}{m}$ and 1.3 ${\mu}{\textrm}{m}$ wavelengths were 0.38 dB/cm and 0.66 dB/cm, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.47-52
• /
• 2013

A novel architecture to reduce dramatically the coupling length of multimode interference-based couplers (MMICs) is proposed by replacing conventionally designed MMICs by cascaded two-section plasmonic stepped MMICs (PS-MMIC). For the 60% cross power splitting ratio in a stepped-width MMIC, the coupling length of device results in around 42% length reduction. Furthermore, the power splitting ratio and coupling length of plasmonic MMIC just vary around 1~2% along the variation of refractive index. On the contrast, those factors for the variation of MMIC's width strongly vary around 30~40%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.696-700
• /
• 1987

Guide modes in a graded index multinmode optical fiber are turned into clad modes when the optical fiber was bended into a perpendicular direction to its optical axes by microbending forces, which causes the loss of the guiding optical power. The theories reported on this microbending power loss can be applied to calculation of the transmission power loss only when the beding period equals to the mode coupling length. In this paper, we obtained the general expression of the optical power transmission loss in a graded index multimode fiber bended periodically. This can be applied to the calculation of the power loss of the periodically microbended fiber with an arbitrary bending shape and period. Also, by using the beam theory in mechanics, we could derive the expression of the displacement of the optical fiber caused by the external force which bends the fiber into a periodic trapezoidal shape. Experiments were carried out to determine the dependence of the power loss on the period of the microbending forces. Experimnetal results were in good agreement (in the same order of the magnitude) with theoritical values derived in our work within the bending period region of 2mm-10mm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.14-19
• /
• 2010

In this paper, a novel architecture for device miniaturization of multimode interference-based couplers (MMICs) is proposed by replacing conventionally designed MMICs by cascaded two-section stepped-width or stepped-index MMICs. For the 82% cross coupling efficiency in a stepped-width MMIC, the coupling length of device results in just 6.7% length reduction. However, for a stepped-width and stepped-index MMIC, the coupling efficiency increases to 93% and the length reduction of 9% occurs. Furthermore, with additional incorporation of tapered devices, it shows that a compact MMIC can be designed in which the coupling efficiency is 90% and the length is reduced to 25%.

• Asian Journal for Public Opinion Research
• /
• v.5 no.3
• /
• pp.175-191
• /
• 2018

This exploratory study considers the difference between personal and perceived societal values related to South Korean women's role in the home, workplace, and society using eight items asked on the Korean Academic Multimode Open Survey (KAMOS), May-July 2017. Factor analysis showed that these eight items could be grouped into two categories: women's role in her family and women's in the outside world. Of the 2,000 respondents, 54.1% personally agreed that "Both the husband and wife should contribute to their family income." People in their 30s felt the largest gap between their personal and societal values; women also felt a larger gap than men. Those who watched television more were generally more conservative than those who used the Internet more. People who felt a smaller gap between societal and personal values were more likely to feel proud to be a Korean citizen. People who believe that it is better not to marry felt a bigger gap between some societal and personal values on items relating to whether a wife should work, whether a woman's housework or paid job is more valuable, and whether women's job performance is equal to men's. People who believe that divorce is sometimes acceptable were also more likely to feel a bigger difference in two items: the item about job performance and an item about whether a married woman's social status is dependent on her husband's.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.500-506
• /
• 2006

An optical fiber displacement sensor has the advantages of relatively simplicity, cheap, small probe size and immunity against environmental perturbation. The working principle of the sensor is based on the intensity modulation that is detection light intensity reflecting from the surface being measured. This paper presents the mathematical model of displacement measurement mechanism of this sensor type. The theoretical and experimental data are compared to verify the model in describing the realistic approach to sensor design. Finally, the analysis results show that displacement response characteristics such as sensitivity, measuring range are easily modified by principal design parameters such as magnitude of optical Power, diameter of optical fiber core and distance between transmitting fiber and receiving fiber.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.93-99
• /
• 2016

In this paper, higher order coupler using small size waveguide which applicable for mobile Ku-band multimode monopulse satellite tracking antenna system, has been designed, implemented and tested. Proposed higher order mode coupler adopts a coaxial structure for low profile characteristic considering installation property to mobile satellite terminal system. In addition, by using proposed coupler, extracted tracking error signal pattern has measured and confirmed that required tracking accuracy is satisfied in desired frequency band. In the future, proposed coupler could utilize for multimode monopulse satellite tracking system for high tracking accuracy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.143-148
• /
• 2013

A novel ultracompact polarization beam-splitter (PBS) combining two plasmonic multimode interference couplers (P-MMICs) and DFB guiding structure is implemented. The $2{\times}1$ and $1{\times}2$ P-MMICs are designed to collect the polarized powers of TE and TM modes reflected by or transmitted through an internal DFB structure. The simulation results show that the designed DFB-assisted PBS is very short (about $75{\mu}m$), and has a low insertion loss, a high extinction ratio, and a broad bandwidth of 20 nm.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.321-328
• /
• 2014

Software defined radar (SDR) is a multi-purpose radar system where most of the hardware processing is performed by software. This paper introduces a concept and technology trends of software defined radar, and addresses the advantages and limitations of the current SDR radar systems. For the advanced SDR concept, the KAU SDR Model (KSM) is presented for the multimode and multiband radar system operating in S-, X-, and K-bands. This SDR consists of a replaceable multiband antenna and RF hardware, common digital processor module with multimode, and open software platform based on MATLAB and LabVIEW. The new concept of the SDR radar can be useful in various applications of the education, traffic monitoring and safety, security, and surveillance depending on the various radar environments.

• ETRI Journal
• /
• v.33 no.2
• /
• pp.275-278
• /
• 2011

This letter presents a polymer $1{\times}2$ thermo-optic totalinternal-reflection digital optical switch (TIR-DOS) with an index contrast of 1.5%-${\delta}$ operating at low power consumption. The structure of our $1{\times}2$ TIR-DOS was created by adding a reflection port to that of a conventional multimode filtering variable optical attenuator. To improve the total-internalr-eflection efficiency, a heater offset was applied to the crossing region of multimode waveguides of the TIR-DOS. The fabricated $1{\times}2$ TIR-DOS shows a low electrical power consumption of 18 mW for an on-off ratio of 35 dB.