• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.1-10
• /
• 2021

In recent decades, the heterogeneous and dynamic behavior of Internet traffic has placed new demands on the adaptive resource allocation of the optical network infrastructure. However, the advent of multifiber elastic optical networks has led to a higher degree of spectrum fragmentation than conventional flexible grid networks due to the dynamic and random establishment and removal of optical connections. In this paper, we propose heuristic routing and dynamic slot allocation algorithms to minimize spectrum fragmentation and reduce the probability of blocking future connection requests by considering the power consumption in elastic multifiber elastic optical networks.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.551-558
• /
• 2016

In multifiber all-optical networks, optical amplifiers are used for amplifying multiple optical signals with different wavelengths in fibers. An optical amplifier operates when any of lightpaths passes through it. Therefore, it should simultaneously amplify as many lightpaths as possible for efficiently utilizing its power. This paper proposes a dynamic lightpath establishment scheme considering the use efficiency of the optical amplifiers and the depletion of the wavelength resources in multifiber all-optical networks. The proposed scheme provides a routing and wavelength assignment strategy that reduces both the power consumption of the optical amplifiers and the blocking probability of the lightpath establishment. Through simulation experiments, we demonstrate the effectiveness of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.370-379
• /
• 2014

Recently, the interest in optical network with multifiber link is continuing to rise since the network traffic has been growing exponentially. However, growing traffic in network leads to increasing the energy consumption of the network equipment. In this paper, we propose a dynamic routing and wavelength assignment (RWA) algorithm based on V-like cost function and layered graph to improve energy efficiency in IP over WDM network with multifiber link. The V-like cost function is used to decide the fiber cost according to the number of used wavelengths. The layered graph with multifiber link is used to select the energy efficient route and wavelength. The proposed RWA algorithm is compared and analyzed with conventional algorithm in view of average power consumption and blocking probability through OPNET modeler.

• Journal of Korean Society for Quality Management
• /
• v.26 no.4
• /
• pp.250-264
• /
• 1998

The purpose of the thesis is to develop simulation program for forecasting of optical connector. So we can achieve the time and the money saving for making the optical connector. Optical performance (insertion loss) of optical connector mainly relies on 3 misalignment factors-ferrule factor due to mis-manufacture from design, auto-centering effect that is fiber behavior phenomena between hole and fiber, fiber misalignment factor. Simulation use experimental data with auto-centering effect and fiber factor and use pseudo data with ferrule through random number generation because it is developing stage. In this study we a, pp.y kernel density estimation method with experimental data in order to know whether it belong to or not specific parametric distribution family. And we simulate to forecast insertion loss of optical multifiber connector under specific design model using nonparametric bootstrap resampling data and parametric pseudo samples from uniform distribution. We obtain the tolerance specifications of misalignment factors satisfying not exceed in maximum 1.0dB and choose optimal hole diameter.

• Textile Coloration and Finishing
• /
• v.25 no.1
• /
• pp.75-81
• /
• 2013

Colorimetric and wash fastness data after repeated wash cycles of Poly Lactic Acid(PLA) fiber were examined with C. I. Vat Blue 1, also other comparing 2 dyes (C. I. Vat Blue 35, C. I. Vat Blue 5), in this study. The fastness of three vat dyes on PLA fiber to repeated washing according to KS K 0430 A-2 regulation increased with dyeing temperatures. The $L^*$ values of the dyed material gradually increased with increasing numbers of wash. Also the f(k) values were decreased reversely. During repeated washing, the vagrant dyes were deposited especially on nylon, polyester, cotton of the adjacent multifiber. C. I. Vat Blue 5 displayed lowest color change to repeated washing of the three dyes used.

• Journal of the Korean Home Economics Association
• /
• v.11 no.3
• /
• pp.285-298
• /
• 1973

The colorfastness of dying persipiration and laundry on summer clothing must be considered, because it has special relation to the human body. The colors of fibers as cotton, p/c, acryl, polyester and nylon which have been widely used for blouse and T-Shirt of Knitted wear are R-P, Y-G, BI-B and print. Studies were carried out with persipirometer, for the natural fiber of cotton the chemical one of nylon, with additional stuff involved, which polluted. The experiment was conducted to colorfastness with acid solution and alkaline solution to see the alteration of color and staining of man-made persiperation. The results obtained from this experiment can be summerized as follows. 1. The order of color alteration isnylon < p/c < coton < polyester < acryl, and the nylon shows the lowest colorfastness, which is 3 class, and the acrly shows the highest colorfateness, which is 5 class. The staining of multifiber test of cotton fabric is nylon < p/c < polyester < cotton < acryl. The staining of multifiber of nylon fabric is nylon polyester < p/c < cotton < acryl. 2. In acid solution and alkaline solution, the alteration of color and staining makes almost no difference, but concerning staining of cotton, the acid solution is lower than the case of alteration solution only. 3. In the pollution on cotton and nylon, the latter is more easily polluted than the former regardless of fabrics. Especially in case of polluted nylon, ti shows the lowest color fastness (2 class), which causes a problem of the dying process and dye stuffs. 4. No difference of color alteration shows among them, but R-P and print show low color fastness (2 class), especially printed nylon shows the lowest value (1 class).

• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.301-309
• /
• 2003

Of the various types of dye that can be used to apply polyamide fibers, acid dyes and pre-metallised acid dyes are great in use so far. However, since these acid dyeings suffer from dye loss during laundering, recourse to an aftertreatment is usually necessary to achieve adequate fastness to washing. In the case of reactive dyes, the characteristically high washfastness of dyeings comes with the concomitant advantages of brightness and low environmental impact. Despite the obvious advantages, the commercialization of reactive dyes for polyamide fibers has not gained widespread success. In this context, the rewards for approach are likely to be considerable. Heterobifunctional reactive dyes were applied to polyamide fibers using various conditions. Optimum conditions and fixation were determined. The forms in which the vinylsulphone and hydrolyzed moieties were examined using HPLC-Mass. In addition, it was found that the extent of the washfastness secured, in terms of both change in color and staining of adjacent multifiber was being acceptable.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.786-796
• /
• 2013

In this paper, we propose a hybrid time-division multiplexing and dense wavelength-division multiplexing scheme to implement a cost-effective and scalable long-reach optical access network (LR-OAN). Our main objectives are to increase fiber plant utilization, handle upstream and downstream flow through the same input/output port, extend the reach, and increase the splitting ratio. To this end, we propose the use of an arrayed waveguide grating (AWG) and an erbium-doped fiber amplifier (EDFA) in one configuration. AWG is employed to achieve the first and second objectives, while EDFA is used to achieve the third and fourth objectives. The performance of the proposed LR-OAN is verified using the Optisystem and Matlab software packages under bit error rate constraints and two different approaches (multifiber and single-fiber). Although the single-fiber approach offers a more cost-effective solution because service is provided to each zone via a common fiber, it imposes additional losses, which leads to a reduction in the length of the feeder fiber from 20 km to 10 km.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.431-441
• /
• 2011

Microbial colorants produced from Zooshikella sp. were developed as a reddish dye for fabrics. The reddish colorants were extracted from cell mass of Zooshikella sp. using 100% ethanol and were identified as prodiginine by 1H-NMR and FT-IR analysis. Microbial prodiginine had a maximum spectrophotomatric absorbance at 530nm and were chemically stable and 30 to $60^{\circ}C$. The microbial prodiginine could dye natural fibers such as cotton, silk, and wool as well as synthetic fibers such as nylon. The maximum K/S values of the dyed fiber were shown at 540 run with a color appearance of RP (reddish purple). Silk and nylon had an excellent dyeability among the experimental fibers. The optimum pH for the dyeing of experimental fibers was at pH 3.0 and dyeability was improved as the temperature increased. The cover change of dyed multifiber fabrics with the microbial prodiginine were measured after washing with detergents and a dry cleaning solvent for the selection of a proper fabric against microbial prodiginine. Among the experimental fibers, silk and nylon did not show significant color change after washing. Therefore, under the criteria of dyeability, silk and nylon were excellent fabrics for being dyed by microbial prodiginine.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.