• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.312-316
• /
• 2004

Single-well tracer tests, especially push pull tracer tests, are more effective to estimate hydraulic parameters and microbial metabolic activities in terms of duration and cost compared to multi-well tracer tests. However, there are some drawbacks in accuracy, complicated data analysis and uniqueness. These shortages are thought to be derived from the applied conditions which affect mass recovery curve and breakthrough curve. Factors such as extraction rate, resting period, hydraulic conductivity and hydraulic gradient are considered as the major factors determining the mass recovery rate and shape of the breakthrough curve. The results of the sensitivity analysis are summarized as follows: 1) the significant change in concentration of breakthrough curve is obtained when the extraction rate increases. This effect would also be much higher if the hydraulic conductivity is lower; 2) the mass recovery rate decreases with the increase of resting time, and the difference of mass recovery rates for different resting times is inversely proportional to the hydraulic conductivity; 3) the sensitivity values decrease with time. The hydraulic conductivity affects not only the early period, but the later period of the breakthrough curves; 4) The influence of the hydraulic gradient on the breakthrough curves is greater at earlier stage than at later stage. The mass recovery rate is inversely proportional to the hydraulic gradient.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.65-70
• /
• 2007

자극-반응(stimulus-response method)법을 이용하여 1단과 다단 혼합침강형 추출장치의 물질흐름특성을 규명하기 위한 실험을 수행하였다. 실험 결과, 1단 추출장치의 혼합조의 반응특성은 CSTR과 동일한 결과를 나타내었으며 혼합-침강조의 반응특성에서는 시간 지연 효과가 나타나며, 단수가 증가할수록 시간지연효과는 증가하였다. 1단과 다단 추출장치의 반응특성 실험결과를 RTD모델 해석프로그램인 K-RTD를 이용하여 분석하여 1단 및 다단 추출기의 RTD을 개발하였다. 본 연구에서 개발한 1단 및 다단 혼합침강조형 추출기의 RTD 모델에 의한 계산값과 실험값에 대한 상관 계수는 각각 0.963과 0.995로 비교적 높은 것을 확인하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권6호
• /
• pp.48-55
• /
• 2013

This study aimed at characterizing unsaturated zone at the source zone area contaminated by DNAPL and investigating feasibility of soil vapor extraction (SVE). Five boreholes with three multi-level screens at the depth of 3.0~4.5 m, 5.5~7.0 m, and 8.0~12.0 m were installed at the source zone. Pneumatic tests were performed to determine the permeability of porous medium. Permeability was estimated to be 81.6 to 203.7 darcy, depending on the applied solutions, which was contradicted by grain size analysis of cored soil samples leading to 3.51 darcy. This is due to air flow through gravel pack during the early stage of pneumatic test. Pressure-drawdown curve in the late stage also well showed the leaky aquifer type, indicating air leakage to the ground. Air flow tests were also carried out to investigate air flow connectivity between multi-level wells, indicating that the horizontal air flow was well developed between the lower screens of the wells, not between the upper and middle screens due to the leakage to the surface. For the SVE test, there was no noticeable variation in TCE vapor concentration between three different test runs: 1. 8 hours daily for 5 days, 2. 24 hours together with air blowing at another well (BH1), 3. five consecutive days. Even for five-day consecutive test, total amount of removed TCE was estimated only to be as low as 46.5 g.

• 한국콘텐츠학회논문지
• /
• 제10권1호
• /
• pp.10-18
• /
• 2010

한글 인식은 부류 수가 많다는 특성을 가지며 이 특성으로 인해 6-유형으로 사전 분류하는 것이 일반적이다. 사전 분류 후 각 유형들은 초성, 중성, 종성으로 분리하여 인식할 수 있다. 초성, 중성, 종성 각각은 부류의 수는 적지만 'ㅔ', 'ㅖ', 과 같이 서로간의 유사도가 높아 오 인식 되는 경우가 종종 발생한다. 따라서 본 논문에서는 6-유형 각각에 대해 다단계 트리 구조를 가진 계층적 인식 방법을 제안 하였다. 또한 초성, 중성, 종성의 서로 간의 간섭을 줄이기 위해, 초성과 종성의 인식 결과를 중성 분류기의 특징으로 사용하였다. PHD08 데이터베이스의 테스트 집합에 대해 98.96%의 정확률을 보였다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.513-520
• /
• 2007

In this paper, we propose an approach to identify the driving environment for intelligent highway vehicles by means of image processing and computer vision techniques. The proposed approach mainly consists of two consecutive computational steps. The first step is the lane marking detection, which is used to identify the location of the host vehicle and road geometry. In this step, related standard image processing techniques are adapted for lane-related information. In the second step, by using the output from the first step, a four-stage algorithm for vehicle detection is proposed to provide information on the relative position and speed between the host vehicle and each preceding vehicle. The proposed approach has been validated in several real-world scenarios. Herein, experimental results indicate low false alarm and low false dismissal and have demonstrated the robustness of the proposed detection approach.

• ETRI Journal
• /
• 제34권4호
• /
• pp.572-582
• /
• 2012

The discrete Gaussian-Hermite moment (DGHM) is a global feature representation method that can be applied to square images. We propose a modified DGHM (MDGHM) method and an MDGHM-based scale-invariant feature transform (MDGHM-SIFT) descriptor. In the MDGHM, we devise a movable mask to represent the local features of a non-square image. The complete set of non-square image features are then represented by the summation of all MDGHMs. We also propose to apply an accumulated MDGHM using multi-order derivatives to obtain distinguishable feature information in the third stage of the SIFT. Finally, we calculate an MDGHM-based magnitude and an MDGHM-based orientation using the accumulated MDGHM. We carry out experiments using the proposed method with six kinds of deformations. The results show that the proposed method can be applied to non-square images without any image truncation and that it significantly outperforms the matching accuracy of other SIFT algorithms.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 추계 총회 및 학술발표회
• /
• pp.43-44
• /
• 1995

The diffusion behavior of liquid into polymer has been described by Fick's law, but the departure from Fickian diffusion is frequently found. In this study, 'noble' expressions for the rates of relaxation and sorption are introduced to eliminate these limitations. The ralaxation-sorption coupled mechanism model are based on the possibility of contacting liquid molecule and the active site which has the numerical concept of free volume. The concept has an analogy of reaction rate expressed by the possibility of collision with molecules and used in adsorption and reactive extraction etc. The new model simulated by Rungc-Kutta method for initial-value problem and Fickian diffusion is caompared with experimental data. The results show that the ralaxation-sorption coupled mechanism is able to account well for Fickian and non-Fickian sorption behavior including sigmoid and two-stage. In addition, this model has a chance of expansion to multi-component sorption with ease.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.218-226
• /
• 2002

The purpose of the present study is to investigate the influence of thermal debinding and sintering conditions on the sintering behavior and mechanical properties of PIMed 316L stainless steel. The water atomized powders were mixed with multi-component wax-base binder system, injection molded into flat tensile specimens. Binder was removed by solvent immersion method followed by thermal debinding, which was carried out in air and hydrogen atmospheres. Sintering was done in hydrogen for 1 hour at temperatures ranging from 1000℃ to 1350℃ The weight loss, residual carbon and oxygen contents were monitored at each stage of debinding and sintering processes. Tensile properties of the sintered specimen varied depending on the densification and the characteristics of the grain boundaries, which includes the pore morphology and residual oxides at the boundaries. The sinter density, tensile strength (UTS), and elongation to fracture of the optimized specimen were 95%, 540 MPa, and 53%, respectively.

• 대한원격탐사학회지
• /
• 제32권6호
• /
• pp.551-566
• /
• 2016

위성 원격 탐사에서는 센서 운영 환경으로 인하여 영상을 수집하는 동안 영상의 질 저하가 일어나며 이러한 영상의 질 저하는 관측된 자료로부터 유용한 정보를 확인하거나 추출하는 데 악 영향을 미치는 번짐 현상(blurring)과 잡음 (noise)을 야기시킨다. 특히 이러한 질 저하는 도시 지역과 같은 조밀한 구조를 가지는 scene으로부터 관측된 영상 자료의 분석에 더욱 영향을 끼친다. 본 연구는 고해상도 범색 영상 자료의 질 저하 현상을 개선시켜 영상이 포함하고 있는 복잡한 구조에 대한 자세한 분석의 정확성을 제고하기 위한 다중 단계 영상 복원 과정을 제안한다. 본 연구는 질 저하 현상을 모형화 하기 위해 Gaussian 가산 잡음과 Markov random field로 정의되는 공간적 연결성, 중심 화소와 이웃 화소 간의 거리에 비례하는 번짐을 가정하였다. 본 연구는 잡음 완화와 번짐 제거를 위해 Point-Jacobian Iteration Maximum A Posteriori (PJI-MAP) 추정 법을 제안한다. 그리고 화소 연결 후 지역 확장을 통한 영상 분할을 사용하였다. 본 연구는 지역 확장을 위하여 동질성과 대조성을 동시에 고려하는 비유사 계수를 제안하고 있다. 본 연구에서는 모의 자료 실험을 통하여 정량적 평가를 실시하였으며 2 개의 고해상도 범색 영상 자료에 대해 적용하여 복원의 효과에 대해 실험하였다. 사용된 원격 탐사 자료는 1 m급의 미국 LA지역에서 수집된 Dubaisat -2 자료와 0.7 m급의 한반도 대전 지역에서 수집된 KOMPSAT3 자료이다. 실험 결과는 제안된 다중 단계 복원 과정이 고해상 자료의 복잡한 구조의 자세한 분석에서 정확성 향상에 기여할 수 있다는 것을 보여주고 있다.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.107-120
• /
• 2017

Spud-can is used for fixing jack-up rig on seabed. It needs to be inserted up to the required depth during the installation process to secure enough soil reaction and prevent overturning accidents. On the other hand, it should be extracted from seabed soils as fast as possible during the extraction process to minimize the corresponding operational cost. To achieve such goals, spud-can may be equipped with water-jetting system including monitoring and control. To develop such a smart spud-can, a reliable numerical simulation tool is essential and it has also to be validated against physical model tests. In this regard, authors developed a numerical simulation tool by using a commercial program ANSYS with extended Drucker-Prager (EDP) formula. Authors also conducted small-scale (1/100) physical model tests for verification and calibration purpose. By using the numerical model, a systematic parametric study is conducted both for sand and K(kaolin)-clay with varying important soil parameters and the best estimated soil properties of the physical test are deduced. Then, by using the selected soil properties, the numerical and experimental results for a sand/K-clay multi-layer case are cross-checked to show reasonably good agreement. The validated numerical model will be useful in the next-stage study which includes controllable water-jetting.