• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.140-143
• /
• 2008

As the number of family living alone is expected to soar due to a change in socio-demographics like divorce, more middle-aged women returning to work, homes become smaller and so on. In addition to in 2020 these people will be increase so that 85 percent of the Koreans compose elderly living alone who is over 65. This study aims at developing a sharing-typed elderly people-centered rental model which is accessible in the community integration dimension as an alternative and finding out theirconscious, their need about residence. and we need to check about their major requirements on improvement step by step. so that we suggest the desirable way on the existing multi house. The model provides benefits in the social, economical and pragmatic dimensions as the families living alone get together and living with others, Particularly, as a residence model which reduces a psychological loneliness and at the same time enables the elderly to continue to live a life in the community while they live together with other people, this model could be a strategy which supports the "Aging in Place." This study is in progress via small group workshop which debate gradually about special subject with similar group member. So we can find the residence's preference on living environment in various condition and the member can imagine freely on their future living arrangement by giving the various informations which can be proceed in future. The workshop proceed three times. at the first workshop, we're check their living environment and satisfaction level. and second time we give the knowledge about shared-type rental house then discuss about the model. and last time we're listen to the residence's opinion.

• 한국항공우주학회지
• /
• 제31권9호
• /
• pp.38-45
• /
• 2003

본 논문은 Strain Energy Hinge(SEH)를 갖는 다목적 2호기의 태양전지판 전개에 대한 동적 모델링과 관련이 있다. 이 연구를 위해 SEH는 단순한 비틀림 스프링으로 치환되었으며 인공위성과 태양전지판은 강체로 가정하고 운동방정식을 유도하였다. 또한 모델링에 지상 실험에 가장 큰 영향을 주고 있는 것으로 관찰된 지지줄의 영향을 고려하였다. 무중력 상태에서의 전개와 지상 전개 결과를 비교한 결과 태양전지판의 전개는 유사하나 인공위성의 운동은 지지줄의 영향으로 인해 전혀 다른 것으로 나타났다. 결론적으로 지상 전개 실험 장치를 이용해 무중력 상태의 태양전지판 전개를 어느 정도 정확하게 묘사할 수 있다. 또한 지지줄의 영향을 조사한 결과 현재 실험실의 지지줄의 길이가 적합한 것으로 나타났다. 지상실험 결과와의 비교는 다음 논문에서 다룬다.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.441-449
• /
• 2018

FE models for complex or large-scaled structures that need detailed modeling of structural components are usually constructed using commercial analysis softwares. Updating of such FE model by conventional sensitivity-based methods is difficult since repeated computation for perturbed parameters and manual calculations are needed to obtain sensitivity matrix in each iteration. In this study, an FE model updating procedure avoiding such difficulties by using response surface (RS) method and a Pareto-based multiobjective optimization (MOO) was formulated and applied to FE models constructed with a commercial analysis package. The test building is a low-rise reinforced concrete building that has been seismically retrofitted. Dynamic properties of the building were extracted from vibration tests performed before and after the seismic retrofits, respectively. The elastic modulus of concrete and masonry, and spring constants for the expansion joint were updated. Two RS functions representing the errors in the natural frequencies and mode shape, respectively, were obtained and used as the objective functions for MOO. Among the Pareto solutions, the best compromise solution was determined using the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) procedure. A similar task was performed for retrofitted building by taking the updating parameters as the stiffness of modified or added members. Obtained parameters of the existing building were reasonably comparable with the current code provisions. However, the stiffness of added concrete shear walls and steel section jacketed members were considerably lower than expectation. Such low values are seemingly because the bond between new and existing concrete was not as good as the monolithically casted members, even though they were connected by the anchoring bars.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.78-86
• /
• 2019

본 연구에서는 전개성능을 고려한 대형 전개형 SAR 안테나의 회전스프링 힌지의 강성 최적설계에 대해 기술한다. 대형 전개형 SAR 안테나는 발사환경에서는 접혀 있다가 궤도에서 임무를 수행할 때 펼치게 된다. 이러한 조건에서 여러 장으로 구성된 안테나 패널을 주어진 시간 내에 최소의 충격으로 전개할 수 있도록 회전스프링 힌지의 적절한 강성을 찾는 것은 매우 중요하다. 회전스프링 강성이 강하면 완전 전개시점에서 발생하는 큰 충격하중이 구조체에 손상을 주며, 약하면 전개 저항으로 인해 완전전개를 보장할 수 없기 때문이다. 이러한 문제를 해결하기 위해서 RecurDyn을 이용한 다물체동역학 해석모델을 생성하였으며 전개해석을 통해 전개성능(전개시간 전개충격하중)을 도출하였다 최적의 회전스프링 강성을 찾기 위해 이에 따른 전개성능을 반응표면법을 통해 근사화 시켰으며 최적설계를 수행하여 적절한 회전스프링의 강성 값을 도출하였다.

• Structural Engineering and Mechanics
• /
• 제73권2호
• /
• pp.209-223
• /
• 2020

This paper investigates the buckling behavior of carbon nanotube-reinforced composite plates supported by Kerr foundation model. In this foundation elastic of Kerr consisting of two spring layers interconnected by a shearing layer. The plates are reinforced by single-walled carbon nanotubes with four types of distributions of uniaxially aligned reinforcement material. The analytical equations are derived and the exact solutions for buckling analyses of such type's plates are obtained. The mathematical models provided, and the present solutions are numerically validated by comparison with some available results in the literature. Effect of various reinforced plates parameters such as aspect ratios, volume fraction, types of reinforcement, parameters constant factors of Kerr foundation and plate thickness on the buckling analyses of carbon nanotube-reinforced composite plates are studied and discussed.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1957-1964
• /
• 1997

Torsional vibration is to vibrate strongly when the ignition pulses of the engine is excited with natural frequency of driveline. Torsional vibration like this can cause various noises as rattle and booming. For this study multi-degree of freedom analysis model of torsional vibration, which is combined with mass moment of inertia and torsional spring, was developed toward two wheel drive, four wheel drive and torsional vibration characteristics were compared and analyzed through the natural frequences, mode shapes and frequency response characteristics which was acquired by the simulation of it. The pertinence of that model was proved by the field test and the outcome of the simulations coincided with feeling test. Therefore, four wheel drive simulation model is considered to be useful thing for reducing torsional vibration of driveline and developing full-time four wheel drive vehicles.

• Structural Engineering and Mechanics
• /
• 제71권1호
• /
• pp.45-56
• /
• 2019

A modified mechanical model of pre-pressed spring self-centering energy dissipation (PS-SCED) brace is proposed, and the hysteresis band is distinguished by the indication of relevant state variables. The MDOF frame system equipped with the braces is formulated in an incremental form of linear acceleration method. A multi-objective genetic algorithm (GA) based brace parameter optimization method is developed to obtain an optimal solution from the primary design scheme. Parameter sensitivities derived by the direct differentiation method are used to modify the change rate of parameters in the GA operator. A case study is conducted on a steel braced frame to illustrate the effect of brace parameters on node displacements, and validate the feasibility of the modified mechanical model. The optimization results and computational process information are compared among three cases of different strategies of parameter change as well. The accuracy is also verified by the calculation results of finite element model. This work can help the applications of PS-SCED brace optimization related to parameter sensitivity, and fulfill the systematic design procedure of PS-SCED brace-structure system with completed and prospective consequences.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.113-124
• /
• 2020

Most of the work of construction equipment and agricultural machinery is done in off-road conditions. Autonomous driving required in these conditions uses GPS sensors, and PID controllers to control their speed and position. The hydrostatic steering, which is composed of a PSU, hydraulic hoses, and cylinders, rather than a mechanical coupling is used in these equipments. The PSU plays a key role in hydrostatic steering. Precise control of the position under various conditions requires detailed behavioral analysis of the basic components and operation. Two Gerotor PSU is now a commonly used safer option. The components of the PSU can be divided into mechanical and hydraulic actuating elements by its behavior. Since the system is combined by mechanical and hydraulic elements, the modelings are performed using Amesim, which is one of the most effective for the multi-domain dynamic system analysis. To confirm the validity of the model, input torque and pressures are checked with varying steering speed. The opening and the steering speed of normal and newly designed control valve set is investigated with the effect of centering spring force and friction. Finally, simulation results with fully detailed model with two gerotors are analyzed and compared with simple model.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.67-76
• /
• 2018

There are 34 mega-cities with a population of more than 10 million in the world. One of the highly populated cities in the world is Seoul in South Korea. Seoul receives $1,140million\;m^3/year$ for domestic water, $2million\;m^3/year$ for agricultural water and $6million\;m^3/year$ for industrial water from multi-purpose dams. The maintenance water used for water conservation, ecosystem protection and landscape preservation is $158million\;m^3/year$, which is supplied from natural precipitation. Recently, the use of the other water for preservation of water quality and ecosystem protection in urban areas is increasing. The objectives of this study is to develop the seasonal forecast method of environmental water in urban areas (Seoul, Daejeon, Gwangju, Busan) and to evaluate its predictability. In order to estimate the seasonal outlook information of environmental water from Land Surface Model (LSM), we used the observation weather data of Automated Synoptic Observing System (ASOS) sites, forecast and hind cast data of GloSea5. In the past 30 years (1985 ~ 2014), precipitation, natural runoff and Urban Environmental Water Index (UEI) were analyzed in the 4 urban areas. We calculated the seasonal outlook values of the UEI based on GloSea5 for 2015 year and compared it to UEI based on observed data. The seasonal outlook of UEI in urban areas presented high predictability in the spring, autumn and winter. Studies have depicted that the proposed UEI will be useful for evaluating urban environmental water and the predictability of UEI using GloSea5 forecast data is likely to be high in the order of autumn, winter, spring and summer.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.175-181
• /
• 2014

A four-link mechanism consisting of torsion bars is used for opening the trunk lid in most midsize sedans. When the weight of the lid is in equilibrium with the spring force exerted by torsion bars, the lid stops opening at a pop-up height. However, the actual pop-up height has large deviations from the specified height even with the same parts in the same car model, which leads to quality issues. Automotive manufacturers have experienced this deviation problem despite much effort to resolve it. In this research, we developed a multi-body dynamics model for the analysis of pop-up deviation of a trunk lid with torsion bars, which can simulate the actual pop-up motion of the trunk lid by considering kinematic constraints of the motion and friction forces in joints. We could also determine the most important factor that governs the pop-up height by sensitivity analysis of all parts. The developed system can be used for the analysis of other trunk lid systems to control the tolerance of parts.