아리랑 3호는 2012년 5월 18일에 발사된 다목적실용위성으로서, 탑재된 AEISS센서는 고도 685km의 태양주기 궤도상에서 0.7m의 공간해상도 흑백 영상과 2.8m 공간해상도의 다중 파장대 영상을 폭 16.8km로 획득한다. 아리랑 3호는 아리랑 2호에 비해 많은 부분에서 성능의 향상이 이루어졌으며 그 중 단일 패스에서 스테레오 영상이 취득 가능하도록 설계되었다. 아리랑 3호를 이용하여 3차원 지형 정보의 추출을 하기 위해서는 정확한 에피폴라 기하를 규명하는 것이 필수적이며, 따라서 본 연구에서는 아리랑 3호 스테레오 영상으로부터 에피폴라 영상 제작을 위한 최적의 영상 변환식을 도출하기 위한 에피폴라 곡선의 특성에 대해 분석하였다. 영상과 함께 제공되는 RPCs(Rational Polynomial Coefficients)를 기반으로 영상 전역에 해당하는 에피폴라 커브를 도출하고 이에 대한 모양분석을 통해 에피폴라 커브가 최소 3차 다항식 이상의 변환식으로 모델링 될 수 있음을 알 수 있었다. 또한 아리랑 3호 AEISS센서의 두 개의 CCDs라인 특징 또한 확인 가능하였다. RPCs 업데이트 시에도 샘플 방향의 영상 오차를 최소화하기 위해 3차식이 필요했으며, 에피폴라 영상 리샘플링 시에도 3차 영상 변환식을 활용한 경우 최대 0.7 픽셀이내의 정밀한 y시차를 확보할 수 있었다.
IKONOS 2호와 QuickBird 2호의 센서 모델로서 제공되는 RPC(rational polynomial coefficients) 모델은 물리적 센서 모델의 대체 모델로 다양한 센서에 적용 가능하다. 고해상도 위성들이 상용화되면서 각기 센서들의 복잡성과 보안성 문제로 인해 물리적 센서모델을 대체할 수 있는 센서 모델로서 RPC의 활용도가 높아지고 있다. 대표적인 상업용 고해상도 위성인 IKONOS 2호는 물리적 센서 모델을 공개하지 않고 각영상에 대한 RPC만을 제공하며 QuckBird 영상은 센서의 기하 정보와 함께 RPC를 제공한다. 이에 본 연구에서는 물리적 센서모델로부터 RPC를 추출하는 원천 기술을 확보하고 RPC의 물리적 센서모델에 대한대체 적합성을 평가해보고자 하였다. 이를 위해 공간해상도가 높은 항공사진과 국내 위성인 KOMPSAT 1호의 기하 모델로부터 분모식과 차수를 달리하는 RPC모델들을 추출하는 실험을 수행하였다. 최소제곱법을 통해 RPC 초기값을 구하고 Levenberg Marquardt 기법을 이용하여 반복 조정한 RPC를 물리적 센서 모델과 비교 평가하여 최적의 RPC를 결정하였다. 그 결과 항공사진은 분모식이 동일한 1차 RPC가 KOMPSAT 1호는 분모식이 상이한 3차 RPC가 가장 정확도가 높았으며 각 오차(RMSE)는 $2{\times}10^{-5}$ 화소 이하로 나타났다.
The difficulties of satellite vibration testing are due to the commonly expressed qualification requirements being incompatible with the limited performance of the entire controlled system (satellite + interface + shaker + controller). Two features cause the problem: firstly, the main satellite modes (i.e., the first structural mode and the high and low tank modes) are very weakly damped; secondly, the controller is just too basic to achieve the expected performance in such cases. The combination of these two issues results in oscillations around the notching levels and high amplitude beating immediately after the mode. The beating overshoots are a major risk source because they can result in the test being aborted if the qualification upper limit is exceeded. Although the abort is, in itself, a safety measure protecting the tested satellite, it increases the risk of structural fatigue, firstly because the abort threshold has been already reached, and secondly, because the test must restart at the same close-resonance frequency and remain there until the qualification level is reached and the sweep frequency can continue. The beat minimum relates only to small successive frequency ranges in which the qualification level is not reached. Although they are less problematic because they do not cause an inadvertent test shutdown, such situations inevitably result in waiver requests from the client. A controlled-system analysis indicates an operating principle that cannot provide sufficient stability: the drive calculation (which controls the process) simply multiplies the frequency reference (usually called cola) and a function of the following setpoint, the ratio between the amplitude already reached and the previous setpoint, and the compression factor. This function value changes at each cola interval, but it never takes into account the sensor signal phase. Because of these limitations, we firstly examined whether it was possible to empirically determine, using a series of tests with a very simple dummy, a controller setting process that significantly improves the results. As the attempt failed, we have performed simulations seeking an optimum adjustment by finding the Least Mean Square of the difference between the reference and response signal. The simulations showed a significant improvement during the notch beat and a small reduction in the beat amplitude. However, the small improvement in this process was not useful because it highlighted the need to change the reference at each cola interval, sometimes with instructions almost twice the qualification level. Another uncertainty regarding the consequences of such an approach involves the impact of differences between the estimated model (used in the simulation) and the actual system. As limitations in the current controller were identified in different approaches, we considered the feasibility of a new controller that takes into account an estimated single-input multi-output (SIMO) model. Its parameters were estimated from a very low-level throughput. Against this backdrop, we analyzed the feasibility of an LQG control in cancelling beating, and this article highlights the relevance of such an approach.
아리랑위성 2호는 다양한 공간정보 생성 및 활용을 위해서 서로 다른 두 궤도를 이용하여 입체영상을 촬영하여 제공할 수 있다. 그러나 이와 같은 입체영상을 지도제작 등에 활용 가능한지 확인하기 위해서는 다양한 실험이 요구된다. 본 연구의 목적은 아리랑위성 2호 입체영상을 이용한 지도제작 가능성을 확인하는데 있으며, 이를 위하여 입체영상 기반의 수치도화를 수행하고 그 성과를 바탕으로 수치고도모델 및 정사영상을 제작한 후 정확도 평가를 수행하였다. RPC 기반의 모델링 결과를 GPS 측량점과 비교한 결과 수평, 수직 모두 ${\pm}1.5m$ 이내의 정확도를 나타냈으며, 이를 바탕으로 실제 도화한 성과를 기존 축척 1/5,000 수치지형도와 비교한 결과 수직방향으로는 지형특성에 따라 최대 5m 이상의 차이도 존재하는 것으로 확인되었다. 한편 비록 실험에 사용된 영상자료 내에 일부 불규칙한 시차가 존재하는 것을 확인하였지만 축척 1/5,000 수치지형도에서 요구되는 레이어에 대해서 최소 70% 이상은 판독 및 도화가 가능한 것으로 확인되었다. 또한 실험을 통해 제작된 도화 DEM을 기존 라이다 DEM 등과 비교함과 동시에 이를 통해 제작된 정사영상의 위치정확도가 축척 1/5,000 정사영상지도에서 요구하는 정확도를 만족하는 것을 확인하였다.
위성 원격 탐사에서는 센서 운영 환경으로 인하여 영상을 수집하는 동안 영상의 질 저하가 일어나며 이러한 영상의 질 저하는 관측된 자료로부터 유용한 정보를 확인하거나 추출하는 데 악 영향을 미치는 번짐 현상(blurring)과 잡음 (noise)을 야기시킨다. 특히 이러한 질 저하는 도시 지역과 같은 조밀한 구조를 가지는 scene으로부터 관측된 영상 자료의 분석에 더욱 영향을 끼친다. 본 연구는 고해상도 범색 영상 자료의 질 저하 현상을 개선시켜 영상이 포함하고 있는 복잡한 구조에 대한 자세한 분석의 정확성을 제고하기 위한 다중 단계 영상 복원 과정을 제안한다. 본 연구는 질 저하 현상을 모형화 하기 위해 Gaussian 가산 잡음과 Markov random field로 정의되는 공간적 연결성, 중심 화소와 이웃 화소 간의 거리에 비례하는 번짐을 가정하였다. 본 연구는 잡음 완화와 번짐 제거를 위해 Point-Jacobian Iteration Maximum A Posteriori (PJI-MAP) 추정 법을 제안한다. 그리고 화소 연결 후 지역 확장을 통한 영상 분할을 사용하였다. 본 연구는 지역 확장을 위하여 동질성과 대조성을 동시에 고려하는 비유사 계수를 제안하고 있다. 본 연구에서는 모의 자료 실험을 통하여 정량적 평가를 실시하였으며 2 개의 고해상도 범색 영상 자료에 대해 적용하여 복원의 효과에 대해 실험하였다. 사용된 원격 탐사 자료는 1 m급의 미국 LA지역에서 수집된 Dubaisat -2 자료와 0.7 m급의 한반도 대전 지역에서 수집된 KOMPSAT3 자료이다. 실험 결과는 제안된 다중 단계 복원 과정이 고해상 자료의 복잡한 구조의 자세한 분석에서 정확성 향상에 기여할 수 있다는 것을 보여주고 있다.
다목적실용위성 5호는 영상 레이더(SAR: Synthetic Aperture Radar)을 탑재하여 야간이나 구름이 있는 지역에 대해서도 지속적인 영상촬영이 가능하다. 발사 후 초기 운영 시험에서는 SAR 탑재체에 의해 관측된 영상에 대한 기하 및 복사 보정을 수행한다. 이러한 보정은 지표상의 위치 및 RCS(Radar Cross Section)을 알고 있는 보정장치에서 반사된 SAR 신호에 의해 나타난 영상 픽셀에서의 위치 및 값을 이용하여 처리된다. 이러한 보정을 위해 기존 반사기와 달리 능동 트랜스폰더는 RCS 값을 변경할 수 있으며, 내부 시간 지연 기능에 의해 가상의 위치로 이동하는 효과를 영상에서 나타낼 수 있다. 본 논문에서는 능동 트랜스폰더의 개발에 필요한 요구사항을 도출하여 이로부터 설계, 조립 및 시험결과를 정리하였다.
Shin, Dong-Bin;Chiu, Long S.;Clemente-Colon, Pablo
대한원격탐사학회:학술대회논문집
/
대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
/
pp.892-895
/
2006
The atmospheric effects on the retrieval of sea ice concentration from passive microwave sensors are examined using simulated data typical for the Arctic summer. The simulation includes atmospheric contributions of cloud liquid water and water vapor and surface wind on surface emissivity on the microwave signatures. A plane parallel radiative transfer model is used to compute brightness temperatures at SSM/I frequencies over surfaces that contain open water, first-year (FY) ice and multi-year (MY) ice and their combinations. Synthetic retrievals in this study use the NASA Team (NT) algorithm for the estimation of sea ice concentrations. This study shows that if the satellite sensor’s field of view is filled with only FY ice the retrieval is not much affected by the atmospheric conditions due to the high contrast between emission signals from FY ice surface and the signals from the atmosphere. Pure MY ice concentration is generally underestimated due to the low MY ice surface emissivity that results in the enhancement of emission signals from the atmospheric parameters. Simulation results in marginal ice areas also show that the atmospheric and surface effects tend to degrade the accuracy at low sea ice concentration. FY ice concentration is overestimated and MY ice concentration is underestimated in the presence of atmospheric water and surface wind at low ice concentration. In particular, our results suggest that strong surface wind is more important than atmospheric water in contributing to the retrieval errors of total ice concentrations over marginal ice zones.
An attempt to derive the surface temperature from the Korea Multi-purpose Satellite (KOMPSAT)-3A mid-wave infrared (MWIR) data acquired over the southern California on Nov. 14, 2015 has been made using the MODerate resolution atmospheric TRANsmission (MODTRAN) radiative transfer model. Since after the successful launch on March 25, 2015, the KOMPSAT-3A spacecraft and its two payload instruments - the high-resolution multispectral optical sensor and the scanner infrared imaging system (SIIS) - continue to operate properly. SIIS uses the MWIR spectral band of 3.3-5.2 ㎛ for data acquisition. As input data for the realistic simulation of the KOMPSAT-3A SIIS imaging conditions in the MODTRAN model, we used the National Centers for Environmental Prediction (NCEP) atmospheric profiles, the KOMPSAT-3Asensor response function, the solar and line-of-sight geometry, and the University of Wisconsin emissivity database. The land cover type of the study area includes water,sand, and agricultural (vegetated) land located in the southern California. Results of surface temperature showed the reasonable geographical pattern over water, sand, and agricultural land. It is however worthwhile to note that the surface temperature pattern does not resemble the top-of-atmosphere (TOA) radiance counterpart. This is because MWIR TOA radiances consist of both shortwave (0.2-5 ㎛) and longwave (5-50 ㎛) components and the surface temperature depends solely upon the surface emitted radiance of longwave components. We found in our case that the shortwave surface reflection primarily causes the difference of geographical pattern between surface temperature and TOA radiance. Validation of the surface temperature for this study is practically difficult to perform due to the lack of ground truth data. We therefore made simple comparisons with two datasets over Salton Sea: National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL) field data and Salton Sea data. The current estimate differs with these datasets by 2.2 K and 1.4 K, respectively, though it seems not possible to quantify factors causing such differences.
항공사진에 육박하는 고해상도 위성영상의 공급이 최근 위성 및 센서 기술의 비약적인 발전과 더불어 활발하게 이루어지고 있으며, 이와 같은 고해상도 위성 자료는 도시 토지이용현황 변화를 지속적으로 모니터링 할 수 있는 거의 유일한 수단이라 할 수 있다. 특히 1999년 12월 발사되어 2004년 8월 현재까지 성공적인 임무를 수행중인 KOMPSAT-1(KOrea Multi-Purpose SATellite) EOC(Electro-Optical Camera) 영상은 광역 도시에 대한 공간해상도 6.6m의 고해상도 영상 자료를 주기적으로 촬영, 공급하고 있어, 지금까지 거의 시도되지 못하였던 도시 토지이용현황 변화를 연도별로 추적, 분석할 수 있는 기반을 제공하고 있다. 따라서 본 연구에서는 2000년 국토지리정보원에서 발행한 대전광역시 토지이용 현황도와 2001년 KOMPSAT-1 EOC 자료를 중첩하여 육안판독에 의해 변화된 지역을 파악, 수정하는 방법을 사용하여 2001년 대전광역시 토지이용 현황도률 작성하고, 개개 항목별 토지이용 현황의 공간적 분포를 분석함으로써 축적된 위성자료를 활용한 토지이용 변화의 시계열 분석을 위한 선행 연구를 하고자 한다.
기후변화 감시에 위성 자료 활용을 위해 GCOS (Global Climate Observing System)는 시공간 해상도, 시간 변화에 따른 안정성, 불확실도 등의 요구사항을 제시하고 있다. 천리안위성 2A호의 경우, 센서의 한계로 인해 산출물들이 공간해상도 조건에 충족하지 못하는 경우가 많다. 따라서 본 연구에서는 영상융합 기법들을 천리안위성 2A호 영상에 적용하여 산출물 생성 시 활용될 수 있는 최적의 기법을 찾고자 한다. 이를 위해 CS (Component Substitution), MRA (Multiresolution Analysis), VO (Variational Optimization), DL (Deep Learning)에 포함되는 총 6가지 영상융합 기법을 활용하였다. DL의 경우 합성적(Synthesis) 특성 기반 방법을 훈련자료 구축에 사용하였다. 합성적 특성 기반 방법의 과정은 PAN (Panchromatic)과 MS (Multispectral) 영상의 공간해상도 차이만큼 두 영상의 해상도를 낮춰 융합 영상을 생성한 후 원본 MS 영상과 비교한다. 합성적 특성 기반 방법은 공간해상도를 저하시킨 PAN 영상과 MS 영상 간 기하 특성이 같아야 사용자가 원하는 수준의 융합 영상을 제작할 수 있다. 하지만, 훈련자료 구축 시 비유사성이 존재하기에 이를 최소화하는 방법으로 무작위 비율을 활용한 PSGAN 모델(PSGAN_RD)을 추가로 활용하였다. 융합 영상의 검증은 일관성(consistency) 및 합성적 특성 기반 정성적, 정량적 분석을 수행하였다. 분석 결과, 영상융합 알고리즘 중 GSA가 공간 유사도를 나타내는 평가지수에서 가장 높은 수치를 보였으며, 분광 유사도를 나타내는 지수들은 PSGAN_RD 모델의 정확도가 가장 높았다. 융합 영상의 공간 및 분광 특성을 모두 고려한다면 PSGAN_RD 모델이 천리안위성 2A호 산출물 제작에 가장 최적일 것으로 판단하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.