• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1215-1223
• /
• 2014

In multi-hop wireless networks, a message transmission path is set up on demand by a route discovery step, where a shortest path is used in general. The shortest path, however, normally uses the nodes near the center area, which causes a high traffic load in that area and reduces the message transmission reliability. We propose a stable routing protocol considering the remaining energy of nodes. Our protocol uses ETX as a link performance estimator and tries to avoid the nodes with smaller energy. By doing this, we can reduce the route failure probability and packet loss. We have evaluated the performance of the proposed protocol using QualNet and compared with AODV and MRFR protocols. The simulation result shows that our protocol has a similar performance as MRFR in terms of end-to-end message reception ratio, average message delay and delay jitter, but outperforms MRFR in terms of traffic load distribution.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.131-137
• /
• 2007

Recently, Ant Colony Optimization (ACO) is emerged as a simple yet powerful optimization algorithm for routing and load-balancing of both wired and wireless networks. However, there are few researches trying to adopt ACO to enhance routing performance in WSN owing to difficulties in applying ACO to WSN because of stagnation effect. In this paper, we propose an energy-efficient path selection algorithm based on ACO for WSN. The algorithm is not by simply applying ACO to routing algorithm but by introducing a mechanism to alleviate the influence of stagnation. By the simulation result, the proposed algorithm shows better performance in data propagation delay and energy efficiency over Directed Diffusion which is one of the outstanding schemes in multi-hop flat routing protocols for WSN. Moreover, we checked that the proposed algorithm is able to mitigate stagnation effect than simple ACO adoption to WSN.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.160-168
• /
• 2013

In tactical environment, tactical wireless networks are generally comprised of Tactical MANETs(T-MANETs) or Tactical WMNs(T-WMNs). The most important services in tactical network are voice and low rate data such as command control and situation awareness. These data should be forwarded via multi-hop in tactical wireless networks. Urgent and mission-critical data should be protected in this environment, so QoS(Quality of Service) must be guaranteed for specific type of traffic for satisfying the requirement of a user. In IEEE 802.11s, TDMA-based MAC protocol, MCCA(MCF Controlled Channel Access), has a function of resource reservation. But 802.11s protocol can not guarantee the end-to-end QoS, because it only supports reservation with neighbors. In this paper, we propose the routing protocol, R-HWMP(Reservation-based HWMP) which has the resource reservation to support the end-to-end QoS. The proposed protocol can reserve the channel slots and find optimal path in T-WMNs. We analyzed the performance of the proposed protocol and showed that end-to-end QoS is guaranteed using NS-2 simulation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.352-362
• /
• 2008

In the mobile ad hoc network, network nodes are continuously capable of movement, but have battery limitations and these characteristics of MANET cause network link failure. Therefore, when performing ubiquitous services with the application of MANET, a technique is required to improve the packet transmission rates as to enable continuous packet transmission while flexibly adapting to topology changes caused by the mobility of nodes. In this paper, we are proposing PAOMDV(Possibility based AOMDV) and OLSR-ME(OLSR with Modified Energy Efficiency) which are mixed-type protocols to solve the problem for design a more efficient protocol. Especially by classifying mobile ad hoc networks as clusters, OLSR-ME protocol is implemented on communication within the clusters, while PAOMDV is used in protocols between clusters. In addition, a selection algorithm for forwarding nodes that responding packet relays in the case of increased hops was proposed for designing a more efficient protocol than existing protocols. We verified the performance of the proposed protocols through a comparative experiment with AODV, AOMDV, ZRP, and the existing protocols. We confirmed the results of the experiment revealed that the proposed protocol had the best packet transmission rate, the shortest delay between nodes, and showed better results in routing overhead.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.935-944
• /
• 2002

It is the Mobile Ad Hoc Networks that constituted with serveral mobile node that can communicate with other mobile nodes. Until now, there were no routing protocols considering such as Multimediadata, VOD (Video On Demand), which is required of lots of bandwidth in Mobile Ad Hoc Network, io we are in the need of QoS (Quality of Service)routing protocol to transmit the data packets faster and more accurate. Also, there are an unidirectional links due to asymmetric property of mobile terminals or current wireless environments on practical mobile ad hoc networks. However, at present, the existing mobile ad hoc routing protocols are implemented to support only bidirectional links. In this paper, we propose the Advanced Routing routing protocol in order to implement a new routing protocol, which is fit to mobile ad hoc networks containing unidirectional links and to support QoS service. For the performance evaluation, we use NS-2 simulator of U.C. Berkeley. We could get not only increased received data rate and decreased average route discovery time, but also network load decreases with compared Best effort service.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.521-528
• /
• 2008

Such conventional maritime communication technologies as radio have short some comings in their transmission quality. It can be overcome by wireless channels provided by satellites such as INMARSAT, which nevertheless suffer from the high costs. In this paper, we propose a novel technology resolving the above problems, featuring in the establishment of maritime communication networks with multi-hop structures. The inter vessel and ship-to- shore networks previously modeled after MANET are remodeled by SANET (Ship Ad Hoc Networks) in the present work. Fan-shaped Search Zone Routing (FSR) protocol also is presented, which utilizes not only static geographical information including the locations of ports and the navigations of courses but also the unique characteristics of ships in terms of mobile nodes. The FSR finds the fan-shaped search zone on which the shortest path is located. The performance of LAR protocol is compared with that of FSR in several ways. First, FSR does not make use of a type of control packets as beaconing data, resulting in a full utilization of the bandwidth of the wireless channels. Second, the delivery rate by the FSR is 100% for the fan-shaped search zone includes at least one route between source and destination nodes on its border line, where as that of LAR has been turned out to be 64%. Third, the optimality of routes searched by the FSR is on a 97% level. Of all, the FSR shows a better performance than LAR by about 50%.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.8
• /
• pp.269-280
• /
• 2022

With the rise of a decentralized finance market (so called, DeFi) using blockchain technology, users and capital liquidity of decentralized finance applications are increasing significantly. The Automated Market Maker (AMM) is a protocol that automatically calculates the asset price based on the liquidity of the decentralized trading platform, and is currently most commonly used in the decentralized exchanges (DEX), since it can proceed the transactions by utilizing the liquidity pool of the trading platform even if the buyers and sellers do not exist at the same time. However, Automated Market Maker have some disadvantages since the cost efficiency of each transaction using Automated Market Maker depends on the liquidity size of some liquidity pools used for the transaction, so the smaller the size of the liquidity pool and the larger the transaction size, the smaller the cost efficiency of the trade. To solve this problem, some platforms are adopting Transaction Path Routing Algorithm that bypasses transaction path to other liquidity pools that have relatively large size to improve cost efficiency, but this algorithm can be further improved because it uses only a single transaction path to proceed each transaction. In addition to just bypassing transaction path, in this paper we proposed a Multi-Path Routing Algorithm that uses multiple transaction paths simultaneously by distributing transaction size, and showed that the cost efficiency of transactions can be further improved in the Automated Market Maker-based trading environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.259-266
• /
• 2013

Since the wireless communications have a limited transmission, the devices just around a master node can exchange data. Though Bluetooth and Zigbee support ad hoc, they are not appropriate for real-time voice communications. In this paper, we present a TDMA-based relay protocol for several users to communicate simultaneously. The proposed protocol can relay data or voice to other nodes in real-time by the multi-hop transmission method using TDMA. And the proposed protocol improves the network performance by allocating different frequencies to the slaves depending on the routing path scheduled by the routing table. NS-2 simulation shows that the performance of the proposed protocol is good in terms of the transmission delay and pecket loss probability in the real-time voice transmission.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.309-321
• /
• 2009

Nowadays, requests of connecting to the Internet while moving are increasing more and more, and various technologies have been developed for satisfying those requests. The IETF nemo WG standardized "Network Mobility Basic Support Protocol" for supporting mobile network through extending existing MIPv6 protocol for supporting host mobility. But, mobile networks can be nested while they are changing their location. And if they are multi -level nested, that causes some problems because of protocol characteristic. In this paper, we try to solve the problem that is complicated routing path caused by multi-level nesting of mobile networks with our limited prefix delegation method. We give a little modification to the standard protocol and add some functions to mobile router. With results from analysis, we could say that our method has better performance than other proposed methods.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.103-111
• /
• 2011

Recently, wireless mesh networks are used in various application areas. However, wireless mesh networks have limited bandwidth by the wireless transmission property, and have severe throughput degradation in multi-hop transmission in single channel wireless mesh networks. To solve this problem and support QoS, a lot of routing protocols have been proposed in mesh networks. In this paper, we propose a wireless mesh networks architecture with MPLS for QoS service. The path and traffic management from the application could be independent from QoS routing protocols by using the MPLS in wirelss mesh networks. In this paper, we design a MPLS-based mesh router with IEEE 802.11e for traffic differentiation and investigate the operation by implementation and test.