• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.195-200
• /
• 2007

We analyzed a sequence of multi-stage automatic cold forging processes composed of four axisymmetric processes followed by a non-axisymmetric process using rigid-plastic finite element based forging simulators. The forging sequence selected for an example involves a piercing process and a heading process accompanying folding or overlapping, which all make it difficult to simulate the processes. To reduce computational time and to enhance the solution reliability, only the non-symmetric process was analyzed by the three-dimensional approach after the axisymmetric processes were analyzed by the two-dimensional approach. It has been emphsized that this capability is very helpful in simulating the multi-stage automatic forging processes which are next to axisymmetric.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.66-72
• /
• 1995

A numerical study for a two dimensional multi-impingement jet with crossflow of the spent fluid has been carried out. To study the flow characteristics especially in the jet flow region, three different distributions of mass flow rate at 5-jet exits were assumed. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Calculations drew the following items as conclusion. 1) A periodical fully developed flow was observed from the third protrusion. This was also observed from previous experimentally by Whidden at al. The Nessult number at the protrusion surface increased mildly as going downstream. 2) The low Reynolds number turbulence model of Launder and Sharma was found to be adequate for the prediction of fluid flow and heat transfer characteristics of two dimensional multi-jet configuration. 3) The Nusselt number at the protrusion surface was nearly proportional to the square root of the Reynolds number.

• Journal of Information Processing Systems
• /
• 제19권4호
• /
• pp.407-416
• /
• 2023

In order to effectively relieve the traffic pressure of the city, ensure the smooth flow of freight and promote the development of the logistics industry, the selection of appropriate port logistics location is the basis of giving full play to the port logistics function. In order to better realize the selection of port logistics, this paper adopts the entropy weight method to set up a multi-dimensional evaluation index, and constructs the evaluation model of port logistics location. Then through the actual case, from the environmental dimension and economic competition dimension to make choices and analysis. The results show that port d has the largest logistics competitiveness and the highest relative proximity among the three indicators of hinterland city economic activity, hinterland economic structure, and port operation capacity of different port logistics locations, which has absolute advantages. It is hoped that the research results can provide a reference for the multi-dimensional selection of port logistics site selections.

• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.121-129
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• 인터넷정보학회논문지
• /
• 제12권2호
• /
• pp.113-122
• /
• 2011

최근, 온라인상에서 사용자간 관계형성 및 커뮤니케이션을 지원하는 Social Network Service(SNS)들이 주목을 받고 있다. SNS에서 형성되는 사용자 정보와 그들의 활동에 대한 정보는 사용자에 대한 특징적인 정보로서 추천과 같은 외부서비스에서 재사용될 수 있는 유용한 정보로 여겨진다. 기존의 사용자 기본 프로파일 정보를 통한 분석이나, 친밀도 및 유사도를 도출하기 위한 단편적인 분석 방법은 가공된 정보의 활용에 있어 한계점을 지닌다. 본 논문에서는 사용자의 SNS활동들로 부터 사용자간 상호영향을 도출하고 다차원 상호관계(Multi-dimension interaction)를 표현 할 수 있는 통합 된 프로파일 모델을 정의하고 이를 도출하기 위한 시스템을 제안한다. 제안된 시스템은 대표적인 SNS인 트위터(Twitter.com)부터 사용자 정보를 수집하여 정보의 재가공을 수행한다. 본 논문의 실험에서는 가공된 정보를 통해 얻을 수 있는, 기존 방식에서는 드러나지 않던 사용자간의 새로운 관계들에 대해 설명한다. 가공된 정보는 특정 사용자의 통합 프로파일로서 컨텐츠 아이템 추천과 같은 외부서비스에서 활용가능 할 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.101-103
• /
• 1999

This paper presents an analysis of 2-dimensional(2-D) multi-regions problem using boundary integral equation method(BIEM). When compared with finite element method(FEM), there are only a few unknown variables in BIEM because it implements numerical analysis only for the surface or boundary of a model. As a result, a lot of computational memory and time can be saved. Procedure to analyze 2-D multi-regions problem using potentials and its derivatives in a boundary as unknown variables, first, numerical analysis is performed for each of subregions. And then interface continuity condition is applied to the interface between them and Gauss Quadrature Formula are adopted to solve singular integral in a boundary in this paper.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1127-1140
• /
• 1997

With the study for identifying the transmission characteristics of vibration and noise generated by operating engine system of a vehicle, recently many engineers have studied actively the reduction of vibration and noise inducing uncomfortableness to the passenger. In this study, output noise was analyzed by multi-dimensional spectral analysis and vector synthesis method. The multi-dimensional analysis method is very effective in case of identification of primary source, but this method has little effect on suggestion for interior noised reduction. For compensation of this, vector synthesis method was used to obtain effective method for interior noise reduction, after identifying primary source for output noise. In this paper, partial coherence function of each input was calculated to know which input was most coherent to output noise, then with simulation of changes for input magnitude and phase by vector synthesis diagram, the trends of synthesized output vector was obtained. As a result, the change of synthesized output vector could be estimated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.75-81
• /
• 2006

Recently, customers interest about noise of household electric appliance is growing. so, designer of product must study to reduce noise of product. Specially, in case of household electric appliance such as washing machine, there was consumers' complaint about noise that is radiated under dehydrating condition. But, in the case of washing machine, identification of noise source is not easy when washing machine is under dehydrating condition. Because various noise source influence each other, it is difficult to find out pure contribution degree about output noise. Multi-Dimensional Spectral Analysis(MDSA) is method that can remove correlation between inputs each other and express pure contribution degree about output of single input. So in this study, we analyzed contribution of each noise source on transfer pass of noise that is radiated at dehydration of washing machine using MDSA.

• 한국소음진동공학회논문집
• /
• 제17권11호
• /
• pp.1056-1063
• /
• 2007

Recently, there has been a growing consumer interest in the amount of noise produced by household electrical appliances. The designer of the product must identify the source of the noise, in order to reduce the noise. In the case of a household electric appliance such as the washing machine, there is consumer's complaint about the noise that is generated during the dehydrating condition. Because of several noise sources combined each other. It is difficult to identify the noise sources that contribute to the noise output. Multi-Dimensional Spectral Analysis (MDSA) is a method that can remove the correlation between different noise sources, and it expresses the key contributing factor as a unique output. This study utilized MDSA to analyze the contribution of each input in the noise output during the dehydrating condition.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.99-104
• /
• 2009

This article describes the analysis of stable grasping for multi-fingered robot. An analysis method of stable grasping, which is based on the three-dimensional acceleration convex polytope, is proposed. This method is derived from combining dynamic equations governing object motion and robot motion, force relationship and acceleration relationship between robot fingers and object's gravity center through contact condition, and constraint equations for satisfying no-slip conditions at every contact points. After mapping no-slip condition to torque space, we derived intersected region of given torque bounds and the mapped region in torque space so that the intersected region in torque space guarantees no excessive torque as well as no-slip at the contact points. The intersected region in torque space is mapped to an acceleration convex polytope corresponding to the maximum acceleration boundaries which can be exerted by the robot fingers under the given individual bounds of each joints torque and without causing slip at the contacts. As will be shown through the analysis and examples, the stable grasping depends on the joint driving torque limits, the posture and the mass of robot fingers, the configuration and the mass of an object, the grasp position, the friction coefficients between the object surface and finger end-effectors.