• 한국항행학회논문지
• /
• 제10권1호
• /
• pp.20-25
• /
• 2006

현재 OFDM(Orthogonal Frequency Division Multiplexing)은 다중경로 채널 환경에서 고속 통신에 적합한 방식으로 각광을 받고 있으나, 몇 가지 단점을 지니고 있다. 단일 반송파 방식에 비해 PAR(Peak-to-Average power Ratio)이 높다는 점은 그러한 단점 가운데 하나이다. 신호의 PAR이 높을 경우 고출력 증폭기를 통과하면서 비선형 왜곡이 발생할 수 있고, 이를 방지하기 위해서는 고출력 증폭기의 선형 구간을 비효율적으로 증가시켜야 하는 문제가 발생한다. 본 논문에서는 OFDM의 PAR 감소 기법중 하나의 OFDM 심벌을 나타내는 다수의 신호를 발생(Mapping)시킨 후, 그 중 가장 낮은 PAR을 갖는 신호를 선택해서 전송하는 SLM(Selected Mapping) 기법에 대한 성능을 분석한다.

• 조명전기설비학회논문지
• /
• 제23권3호
• /
• pp.45-52
• /
• 2009

Power line communication or power line carrier (PLC) is a system for carrying data on a conductor and can also used for electric power transmission. Now the powers used in the motor drive system are mostly DC sources. Even AC powers in some systems are generated from DC sources by the inverter. It is can be forecasted that the DC-link PLC technology will be widely used in various industrial fields. In this paper a novel BLDC motor control system using ASK DC-link PLC technology is proposed. The characteristic of this system is that the communication only needs 2 DC lines and there are no additional lines to translate the reference signals. The number of signal cables can be minimized when the DC-link PLC method is applied in the multi motor control system and the slip ring design also can be simplified when this method is applied in rotation machines. The proposed motor control system is clarified by the PSIM and MATLAB simulations and tested through the hardware prototype.

• Journal of Information Technology Applications and Management
• /
• 제15권1호
• /
• pp.261-270
• /
• 2008

Wireless Mesh Networks (WMNs) have emerged as one of the new hot topics in wireless communications. WMNs have been suggested for use in situations in which some or all of the users are mobile or are located in inaccessible environments. Unconstrained transmission in a WMN may lead to the time overlap of two or more packet receptions, called collisions or interferences, resulting in damaged useless packets at the destination. There are two types of collisions; primary collision, due to the transmission of the stations which can hear each other, and hidden terminal collision, when stations outside the hearing range of each other transmit to the same receiving stations. For a WMN, direct collisions can be minimized by short propagation and carrier sense times. Thus, in this paper we only consider hidden terminal collision while neglecting direct collisions. To reduce or eliminate hidden terminal collision, code division multiple access (CDMA) protocols have been introduced. The collision-free property is guaranteed by the use of spread spectrum communication techniques and the proper assignment of orthogonal codes. Such codes share the fixed channel capacity allocated to the network in the design stage. Thus, it is very important to minimize the number of codes while achieving a proper transmission quality level in CDMA WMNs. In this paper, an efficient heuristic code assignment algorithm for eliminating hidden terminal collision in CDMA WMNs with general topology.

• 한국군사과학기술학회지
• /
• 제12권2호
• /
• pp.182-190
• /
• 2009

GPS receivers can be disrupted by intentional or unintentional jamming, then it is unable to receive GPS signals and it is impossible to get the correct navigation results. Anti-jamming schemes using array antennas are being studied well due to high performance of those, and the efforts to apply them to GPS receiver are also being done. A GPS receiver structure for a multiple beam-forming scheme among those schemes has been proposed in this paper, and the performance is also compared with that using a general GPS receiver structure. For a general GPS receiver structure, each satellite signal which is formed by a beam-forming scheme is summed to be processed in a part of digital signal processing. For a proposed GPS receiver structure, however, each satellite signal is respectively processed by a designated channel in a part of digital signal processing. Finally, it is confirmed that the proposed GPS receiver structure is superior to a general GPS receiver structure in a point of the carrier to noise power ratio and the navigation accuracy using a software platform.

• 한국통신학회논문지
• /
• 제26권12A호
• /
• pp.1978-1982
• /
• 2001

다중 반송파 전송시스템에서 수신신호의 지연 확산에 따른 인접 심볼간섭 (ISI)과 인접 채널간섭 (ICI)을 제거하기 위하여 전송프레임에 삽입한 Cyclic Prefix (CP)는 시스템의 전송 효율을 저하한다. 시간영역 등화기는 채널 임펄스 응답 시간을 줄임으로써, 채널의 상태에 상관없이 CP 길이를 최소로 유지하여 시스템의 전송 효율을 개선한다. 본 논문에서는 MMSE (Minimum Mean Square Error) 방식 시간영역 등화기에 Newton 방법을 적용함으로써, 최적의 등화기 탭 계수를 추정하는 연산 시간을 단축할 수 있는 알고리즘을 제안하고 그 성능을 분석하였다.

• 한국통신학회논문지
• /
• 제29권1A호
• /
• pp.18-30
• /
• 2004

본 논문에서는 비동기 CBMA 시스템에서 발생하는 배열 안테나 소자의 오차 보정(calibration) 문제를 다룬다. 수신기치 주파수 오프셋 오차가 있을 경우에 적용 가능한 새로운 순차적인 오차 보정 알고리즘을 제안한다. 제안된 알고리즘은 비선형 배열 안테나에도 적용가능하며, 사전에 알고 있는 신호를 사용하여 보정하는 것이 아니라, 셀 내의 임의의 사용자 PN code 만을 사용하여 온라인으로 오차 보정을 수행한다. 제안된 알고리즘은 채널과 주파수 오차를 추정하는 부분과 배열안테나 보정을 추정하는 부분으로 구성되어 있으며, 컴퓨터 모의 실험과 W-CDMA용 스마트 안테나 테스트 베드에서 얻어진 실측 데이터를 이용한 실험을 통하여 그 성능이 검증되었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.57-61
• /
• 2006

As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.456-458
• /
• 2006

Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.

• 한국정보처리학회논문지
• /
• 제5권5호
• /
• pp.1285-1299
• /
• 1998

멀티미디어 서비스의 개발과 ATM 기술의 도입에 따라 통신망 환경이 한결 복잡해 지면서 다양한 통신망과 서비스간의 상호 운용성 확보를 위한 효과적인 상호 접속 방법의 마련이 요구되고 있다. 이는 다양한 서비스 품질을 요구하는 통신망 환경에서 사용자의 요구와 망 제공 능력을 고려한 서비스 상호 운용성 확보 수단인 통신망 계위 및 서비스 계위의 연동 기능을 통하여 제공될 수 있다. 본 논문에서는 ATM 망 기반의 초고속 정보통신망 환경에서 통신망에 독립적인 방법으로 멀티미디어 서비스를 제공하는 연동 방안인 서비스 연동 개념을 제안한다. 또한 통신망 진화 단계에 따라 연동 시나리오와 연동망 구조를 분석하고 이를 지원하기 위한 통신망 장치로 에이전트 개념을 적용한 ATM 망 기반의 연동 브로커를 제안한다. 이어서 서비스 연동 기능을 갖는 연동 브러커의 기능을 분석하고 이를 바탕으로 대표적인 연동 기능에 대한 동작 흐름을 설계하고 시험 분석한다.

• 한국분말재료학회지
• /
• 제17권4호
• /
• pp.295-301
• /
• 2010

Multi shell graphite coated Ag nano particles with core/shell structure were successfully synthesized by pulsed wire evaporation (PWE) method. Ar and $CH_4$ (10 vol.%) gases were mixed in chamber, which played a role of carrier gas and reaction gas, respectively. Graphite layers on the surface of silver nano particles were coated indiscretely. However, the graphite layers are detached, when the particles are heated up to $250^{\circ}C$ in the air atmosphere. In contrast, the graphite coated layer was stable under Ar and $N_2$ atmosphere, though the core/shell structured particles were heated up to $800^{\circ}C$. The presence of graphite coated layer prevent agglomeration of nanoparticles during heat treatment. The dispersion stability of the carbon coated Ag nanoparticles was higher than those of pure Ag nanoparticles.