• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.280-288
• /
• 2009

In this paper, a high-power and low-loss stripline 10-way power divider is designed and fabricated fur the feed network of an S-band linear array antenna with Chebyshev current distribution which has a narrow beam width and low side lobe level(SLL) of 35 dB or more. The unit cell of the power divider is based on a T-junction power divider and the whole divider is comprised of the cascaded unit cells. The multi-stage impedance transformer and modified ring hybrid are used in designing the power divider for performance improvement. And the reflection loss and insertion loss are improved by modifying a connector structure for a coaxial-to-stripline transition.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.303-308
• /
• 2010

This paper proposes a method for improving the isolation characteristic of multi-input multi-output (MIMO) antennas using a split ring resonator (SRR) array structure between the two radiating elements. The fabricated antenna satisfies the 10 dB return loss requirement in the Mobile-WiMAX frequency band from 3.4 GHz to 3.6 GHz. The isolation between the two radiating elements is improved by approximately 20 dB at the center frequency by inserting a SRR array structure. The measured peak gains of the two elements are 2.3 dBi and 2.4 dBi, respectively.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.4
• /
• pp.28-34
• /
• 1975

텔레비젼 수신용 안테나로써 가장 널리 사용되고있는 Yagi안테나는 구조가 간단하고 지향성 이득등이 좋으나 방사주파수에 대한 반파장길이의 소자를 사용하므로 칫수가 커지고 주파수대역이 좁다. 따라서 설치 취급등에 불편을 느낄 경우가 많다. 한편 최근 일반적으로 아무곳에서나 용이하계 설치할 수 있을만큼 소형이면서 화질이 좋은 수상이 가능한 수신안테나에 대한 요망이 커지고 있는데 본 연구에서는 그 파장에 비해서 소형인 폴디드·다이폴 안테나 소자 2개를 좁은 간격으로 배열하고 이들을 이상결합하므로써 VHF텔레비젼전파의 고채널 주파수대에서 비교적 양한 단일지향성을 얻고 있다. 본 안테나에 능동소자를 이용한 저잡음광대역증폭기를 삽입한다면 다소자 Yagi안테나에 비나될 전후방비를 갖는위에 그의 이득도 크게 증가되어 일반수상안테나로 뿐만 아니라 고우스트 방지용실내안테나로서 상당한 기여틀 할것으로 생각된다. The Yagi antenna, which is most widely used for television receiving, has simple form and good directiyity as well as high gain, but it must be made with linear elements of half wave length. Therefore, the dimension of multi-element Yagi antenna becomes bulky and so a(ten it is inconvenient to install and handle, because of its big size. Moreover the frequency band width of the Yagi antenna is usually not broad enough to cover the total frequency range of VHF TV channels in our country. Recently, the aemand for an antenna which is not only small enough to install it easily anywhere but also assures good quality of pictures is generally increasing. In this study 2 elements o( folded dipole, which is small compared to its electrical ways length, are fixed parallel to each other with a narrow distance and the emfs induced in them are made to get together with some phase difference. This new phased array antenna has shown a relatively good unidirectivity through over the high channel VHF television frequency hand as well as the good PIB ratio which is comparable to that of multielements Yagi antenna. As a result this new antenna will be used as a VHF high channel TV receiving antenna and it may become better antighost antenna when used inside the room than other room antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1060-1070
• /
• 2003

The frequency selective surface for use in Ka/Ku band parabolic antenna of domestic satellite communications is proposed. The frequency selective surface structure consists of the infinite periodic arrays of the triple square loop slot element with narrow width on the honeycomb structure of multi-layered dielectric. The frequency selective surface is fabricated and measured. The good agreement is obtained between theory and experiment. It is demonstrated that the frequency selective surface passes 14/12 GHz band wave while reflecting 30/20 GHz band wave as required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.689-695
• /
• 2007

Wireline relay stations(RS's) are connected to cellular base stations(BS's) via radio-over-fiber(RoF) to enhance system capacity and to reduce shadow areas. Unlike wireless multi-hop systems, BS-to-RS signaling is transmitted out-of-band, thus reducing the effect of interference caused by frequency reuse. In this paper, antenna arrays used in addition to the wireline RS's are considered to evaluate the transmission capacity gain and performance variations according to the may structures. In particular, RS locations to maximize the gain, may distribution patterns for a given number of antenna elements, performance enhancement for a varying number of elements are experimentally determined to suggest a proper utilization of antenna ways in conjunction with wireline RS's.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1574-1580
• /
• 2021

This paper designs and presents the results of an air network simulation radio transmission link applied with a multi-beam active phase array antenna simulator in a testbed system for verifying an air network currently underway as a technology development task. Using the Ku band, the Radio transmission link was designed in consideration of the link budget to satisfy the requirements for the system being developed. Considering short-distance links and long-distance links, the required EIRP and G/T performance scales of multi-beam repeaters and mission planes were applied to confirm the minimum and maximum link margins based on Eb/No. In this Radio Transmission Link design, the application analysis results such as rainfall availability are used to effectively establish standards when selecting the operating radius of the multi-beam relay system and related system standards.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.344-350
• /
• 2009

This paper proposes a hybrid antenna with novel beam steering scheme. The antenna have a cassegrain structure composed of two reflectors. The main reflector is designed for high gain performance using parabola curvature, and the sub-reflector is plate and can be rotated by ${\pm}3^{\circ}$. Thus proposed antenna can steer a antenna beam using the inclination of sub-reflector. A feed array composed of 20 elements is adapted as a feeder for electrical beam steering, and the antenna can be possible to steer the beam by the feed array with sub-reflector. Proposed antenna was fabricated to be operated in Ka-band(30.085$\sim$30.885 GHz) for TX and K-band(20.355$\sim$21.155 GHz), which are the operation frequencies of the Korean satellite, Mugunhwa, to provide satellite multi-media service to vehicles. By the performance test, it can be known that the antenna has minimum gain of 47 dBi for TX and 44.4 dBi for TX and can steer the beam by ${\pm}2^{\circ}$ with sub-reflector.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.985-995
• /
• 2003

In this paper, a study on optimization of three dimensional multi-layered metallic disk array structure(MDAS) excited by circular waveguides was performed to shape efficient flat-topped element patterns(FTEP) of ${\pm}$20$^{\circ}$ beam width. Each radiating element of the MDAS is composed of input, transition and radiation circular waveguides and finite metal disks stacked on radiation circular waveguide. It has an array structure of a hexagonal lattice appropriate for the conical beam scanning. The analytic algorithm for the MDAS was proposed and the code was also programmed using it. Optimal design parameters of the MDAS were determined through the optimal simulation process to obtain ${\pm}$20$^{\circ}$ FTEP. Also, bandwidth characteristics for FTEP and reflection coefficients of the MDAS were investigated and, as the results, it was shown that the MDAS could shape good FTEPs of ${\pm}$20$^{\circ}$ beam width in main planes at least within a 5.6 % frequency band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.386-391
• /
• 2006

In this paper, a design of V-type Linearly Tapered Slot Antenna(V-LTSA) with uniplanar microstrip-to-coplanar stripline(CPS) transitions is presented. The effect of reducing and increasing with taper width G, teper length L and opening angle are also considered at 5.8 GHz. In the result of a simulation by using CST-MWS, the return loss characteristic came very wide band about 4.3GHz, or 1.8 Octave. Proposed V-LTSA design schemes are expected to be a good antenna for microwave and millimeter-wave communcations.