• International journal of advanced smart convergence
• /
• 제10권4호
• /
• pp.45-51
• /
• 2021

Polar transmitter can support multi-band and multi-mode operation. The efficiency of frequency usage can be increased if polar transmitters can transmit multi-carrier signals. In this paper the configuration of polar transmitters is investigated to generate multi-carrier signals. Spectrum and CCDF Simulation results of two-carrier signals generated by the polar transmitter can be used to design of PM and AM path in a polar transmitter.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.431-434
• /
• 2011

In this paper, bandwidth enhanced design of dielectric resonator antenna fabricated in multi-layer substrate is introduced. The proposed dielectric resonator antenna is operating with fundamental TE101 mode and higher-order TM111 mode. Each resonance frequency is dependent on resonator dimensions. As increasing the height of radiating aperture, the higher-order TM111 mode resonance frequency approach the fundamental TE101 mode resonance frequency and the antenna bandwidth increase by double resonance. Three different aperture height size antennas that operated at 7GHz are fabricated in FR4 multi-layer substrate. Measured 10 dB matching bandwidth is 8 percent for single resonace antenna and 18 percent for double resonance antenna.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.20-25
• /
• 2012

천리안 위성은 해양 관측과 기상영상 전송, 그리고 Ka 대역 위성통신 신호 중계를 위한 다목적 복합위성으로 2010년 발사되어 운용되고 있다. Ka 대역 위성통신 중계기는 MSM 스위치 기능으로 다중 빔 지향이 가능하고 다중모드 고속 데이터를 전송할 수 있다. 천리안 위성통신 중계기는 MSM 기능으로 다수의 신호발생기와 Ka 대역의 주파수 사용으로 시스템 위상잡음이 증가할 수 있다. 위상잡음은 다중모드 및 고속 데이터 전송에 영향을 미치고 있으며, 높은 위상잡음을 갖는 위성 전송시스템은 전송 신호를 복원하기가 어렵다. 본 논문에서는 천리안 위성통신중계기의 위상잡음을 측정하고, 측정된 위상잡음을 수신 잡음대역폭 관점에서 위상잡음 영향을 분석하고 평가한다. 아울러, 천리안 위성통신 중계기 위상잡음에 대한 다중모드 및 고속 전송 데이터의 전송 성능을 평가한다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• 한국정보통신학회논문지
• /
• 제12권7호
• /
• pp.1180-1186
• /
• 2008

본 논문에서는 고속 데이터 전송을 위한 고차 모드 신호의 양호한 위성 전송에 요구되는 수신 단말기의 저잡음 증폭 주파수 변환기의 위상 잡음 특성을 해석한다. 위상 잡음은 낮은 데이터 전송뿐만 아니라 고속 데이터 전송을 위한 고차 모드 신호 전송에 심각한 영향을 미치며, 전송 링크 주파수가 증가함에 따라 위상 잡음이 증가하여 고속 데이터 전송에 요구되는 고차 모드와 높은 주파수 사용으로 인한 전송 열화 성능은 증가한다. 따라서, 높은 주파수 영역을 갖는 고차 모드 수신 단말기의 저잡음 증폭 주파수 변환기의 위상 잡음은 전송 성능에 지배적인 영향을 가지므로, 저잡음 증폭 주파수 변환기 위상 잡음에 대한 가용 전송 모드를 해석하고 가용 서비스 적용 방법을 제시한다.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.579-587
• /
• 2019

In this paper, pounding tuned mass dampers (PTMDs) were designed to mitigate the multi-mode vortex-induced vibration (VIV) of stay cable utilizing the viscous-elastic material's energy-dissipated ability. The PTMD device consists of a cantilever metal rod beam, a metal mass block and a specially designed damping element covered with viscous-elastic material layer. Wind-tunnel experiment on VIV of stay cable model was set up to validate the effectiveness of the PTMD on multi-mode VIV mitigation of stay cable. By analyzing and comparing testing results of all testing cases, it could be verified that the PTMD with viscous-elastic pounding boundary can obviously mitigate the VIV amplitude of the stay cable. Moreover, the installed location and the design parameters of the PTMD device based on the controlled modes of the primary stay cable, would have a certain extent suppression on the other modal vibration of the stay cable, which means that the designed PTMDs are effective among a large band of frequency for the multi-mode VIV control of the stay cable.

• ETRI Journal
• /
• 제36권4호
• /
• pp.690-693
• /
• 2014

Compact multi-band bandpass filters using quad-mode stub-loaded resonators are proposed in this letter. Firstly, a novel approach about the mode-splitting characteristics of the quadruple-mode resonator is investigated, which can provide dual-band behavior. Secondly, a quad-band filter is proposed and designed by cascading two quadruple-mode resonators; the upper one operates at 1.8/2.4 GHz (GSM- and WiMax-band) and the lower one at 1.57/2.1 GHz (GPS- and WCDMA-band). Finally, the proposed filters have been fabricated. Respectable agreement between simulation and measurement verifies the validity of this design methodology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1829-1831
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.263-267
• /
• 2009

Cylindrical monopole antenna is one of most promising candidates for multi-band applications such as PCS, WLAN, DMB, and UWB wireless services. In this research, we demonstrate that there exist two types of current distributions according to the exciting frequency in a double band cylindrical monopole antenna, in which double resonance is achieved by adjusting the coupling structure of the antenna base. The operating modes of current distributions are identified from CST software simulations, the standing wave mode in a lower band and the traveling wave mode in a higher band. Also it is noticed that the mode behavior is quite similar to a helical antenna, a standing-wave (resonance) mode and a traveling-wave (non-resonance) mode according to the electrical dimensions of antenna. The effective ranges for operating modes and design formulas of the double band antenna are derived from simulation and measured results.