• 아시안잔디학회지
• /
• 제13권2호
• /
• pp.79-90
• /
• 1999

This study was conducted to provide basic understandings for proper management of zoysiagrass fairways. Mowing intervals of 2, 4 and 6-days, with and without aeration were compared at two fertility levels. Turfgrass quality, growth and pest infestation were evaluated. Turf density, number of tillers, leaf width and resiliency were significantly affected by mowing frequency. Turfgrass plots mowed every 2-day had greater density, tillering, and resiliency but had narrower leaf width compared to other mowing treatments. Clipping dry weight with every 2-day mowing increased in the early stage of mowing treatment regardless of fertilizer application rates but gradually decreased in the later stage of mowing treatment compared to every 4 or 6-day mowings. The dry weight of above-ground part was not affected by mowing frequency, but that of underground part was significantly higher for every 6-day mowing frequency(3.3kg/day/m2) compared to every 2 or 4-day mowings. The organic mater content in soil was not different among mowing treatments but it was significantly reduced by the core aerification treatment, indicating significant effect of core aerification on thatch decomposition. Occurrences of weeds such as annual bluegrass and crabgrass according to mowing frequency were greater in every 2-day mowing treatment, while plots mowed every 6 days had less weed occurrence. Occurrence of rusts significantly increased in high fertility plots and frequently mowed turfgrasses.

• 아시안잔디학회지
• /
• 제3권2호
• /
• pp.77-82
• /
• 1989

This experiment was carried out to determine the value of turfgrass clippings as a source of protein for animal feed. Levels of crude protein(CP) and in vitro dry matter digestibility(JVDMD) were determined for Korean lawngrass (Zoysia Japonica Steud.) under three levels of nitrogen fertilizer ( 0 , 350 and 700kg ha year and three levels of mowing interval between cuts (lO, 20, and 30 days). Sampling was done on the three-year old turffield on which nitrogen and mowing treatments were Imposed. Clippings were collected after mowing, and CP levels were calculated from a measurement of total N(CP = N >< 6.25) l)y Auto-analyser system-2 procedure and IVDMD by Maeng's method which was partly modified with Tilley and Terry's procedure. With the increased nitrogen legime the CP content of leaf clippings varied from 6.6 to 13.6% and that Of stem clippings from 4 to 10.3%. The CP levels of clippings were directly proportional to the N fertilization rate. The highest CP content was recorded in early July when it was 14.1% at 35OkgN ha -and I 18.l%kgN ha-1 with 10-wcek mowing interval. Mowing interval had little effect on the CP content in both leaf and stem clippings. The level of IVDMD in the Korean lawngrass clippings varied with mowing interval. The highest level measured was 47%, hut this varied during the growing season and occurred in the following order : early summer > summer > fall. This experiment has shown that Korean lawngrass clippings can he helpful source of protein for use in some animal feeds and that a high concentration of CP can occur depending upon N fertllizer and that of I VDM I) upon mowing practices.

• 아시안잔디학회지
• /
• 제24권1호
• /
• pp.16-23
• /
• 2010

잔디 깎기는 골프장에서 중요한 관리 작업의 한가지이다. 잔디깎기 주기와 높이는 잔디의 광합성 능력, 밀도, 뿌리생장 등에 영향을 미친다. 본 실험은 한국잔디의 잔디깎기 높이별 지상부 생장량을 조사하여 적절한 잔디깎기 주기를 결정할 수 있는 자료를 제공하고자 수행되었다. 들잔디를 10mm 높이로 관리시 줄기의 일 생장량은 2.1-4.7mm(7월), 1.9-2.9 mm(8월), 0.9-1.5 mm(9월), 0.6 mm(10월)로 조사되었다. 상기 자료는 잔디깎기를 초장의 33% 이내로 깎는다는 개념으로 볼 때 7월에는 1.1~2.3일, 8월에는 1.7~2.4일, 9월에는 3.5~5.4일, 그리고 10월에는 8.5일 간격으로 깎기를 하는 것이 적합한 것으로 나타났다. 들잔디를 15 mm 및 17 mm 높이로 관리시 깎은 후의 지상부 생장량은 7월 4.0-5.3 mm, 8월 2.9-4.5 mm. 9월 1.4-3.7 mm 그리고 10월 13 mm로 나타나 7, 8, 9, 10월의 적정 깎기 주기는 각각 1.4~1.9일, 1.7~2.5일, 2.3~6.3일, 6.8일이 적합한 것으로 나타났다. 들잔디를 18 mm 및 21 mm 높이로 깎은 후의 생장량은 7월 3.5-4.7 mm, 8월 2.9-4.9 mm, 9월 1.5-1.8 mm로 나타났으며, 7, 8, 9월의 적정 깎기 주기는 각각 1.9~2.6일, 1.8~3.1일, 5.9~7.0일의 범위로 나타났다. 그리고 50 mm 높이 깎은 경우는 지상부 생장량이 7월 4.6-4.9 mm, 8월 5.0-6.5 mm, 9월 2.5-4.7 mm로 나타나 7, 8, 9월의 적정 깎기 주기는 각각 5.1~5.4일, 3.9~5.0일, 5.3~9.8일의 범위로 계산되었다. 상기 조사 결과 깎기 높이에 따라 재생장 길이에 차이를 보이는 것으로 나타났으며, 짧게 깎을수록 재생장 길이가 짧아지는 것으로 조사되었다.