• Journal of Information Processing Systems
• /
• 제17권1호
• /
• pp.28-36
• /
• 2021

This paper proposes two novel methods to model and simulate a mobile Internet of Things (IoT) system using the discrete event system specification (DEVS) formalism. In traditional simulation methods, it is advantageous to partition the simulation area hierarchically to reduce simulation time; however, in this case, the structure of the model may change as the IoT nodes to be modeled move. The proposed methods reduce the simulation time while maintaining the model structure, even when the IoT nodes move. To evaluate the performance of the proposed methods, a prototype mobile IoT system was modeled and simulated. The simulation results show that the proposed methods achieve good performance, even if the number of IoT nodes or the movement of IoT nodes increases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.801-809
• /
• 2000

Until recently as a method of repairing leaking problem, generally urethane series were used for many structures as subway, box culvert etc. However the lacking of sufficient penetration capacity have made it difficult to repair such structures completely. Now, we could achieve enhanced quality of repairing work by using new material which was compounded of urethane series and cement series properly. This material can penetrate concrete structure efficiently and move interactively with the structure in case of the thermal expansion. Besides of this, we could prevent expecting leakage through several improvements on the aspects of design, materials and site implementation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.371-377
• /
• 2005

This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.

• 한국전자파학회논문지
• /
• 제26권2호
• /
• pp.158-164
• /
• 2015

OTM(On-The-Move) 위성통신 시스템은 차량에 탑재되어 고속 주행하거나 요동이 심한 지역을 주행하면서 위성 통신 링크를 안정적으로 유지하여야 한다. 따라서 열악한 환경에서도 정밀 추적이 가능하고, 차량에 탑재할 수 있도록 소형/경량화된 위성 추적 시스템이 필요하다. 2개의 슬롯(slot)으로 구성된 단일 모드 커플러를 사용하여, 원형 편파 특성을 이용하여 하나의 물리적 채널로 상하, 좌우 2개의 차신호를 동시에 비콘 수신기까지 전달하는 방안을 제안하고, 측정된 추적 오차신호를 제시한다.

• 한국소음진동공학회논문집
• /
• 제21권10호
• /
• pp.951-959
• /
• 2011

In this study, an OTM(on-the-move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite while moving was addressed. Since LOS(line-of-sight) of antenna should direct satellite consistently while vehicle moving to guarantee high satellite communication quality, active antenna LOS stabilization is a core technology for OTM antenna. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. In consideration of driving mechanism which consists of gear train and flexible driving shafts, a two-mass-system dynamic model coupled with vehicle motion was presented. An internal PI-control loop + outer PI-control loop structure has been suggested in order to damp the torsional vibration and stabilize control system. The classical pole-placement method was applied to design control gains. In addition, a vehicle motion compensation control beside of the feedback control loop has been suggested to improve LOS stabilization performances. The feasibility of the proposed control design was verified along with some experimental results.

• 정보처리학회논문지A
• /
• 제13A권1호
• /
• pp.57-70
• /
• 2006

본 논문에서는 주어진 상세배치의 배선밀집도를 예측하고, 배선밀집도가 높은 지역을 효과적으로 해결하는 새로운 알고리즘을 소개한다. 제안된 기법의 특징은 다음과 같다. 첫째, 특정지역을 관통하는 넷이 많아 그 지역의 배선밀집도가 높을 경우 관통하는 넷에 연결된 셀들을 효과적으로 찾아내어 그들의 위치를 조정함으로써 배선밀집도를 완화시킨다. 둘째, 리플이동 (ripple movement) 기법을 이용하여 셀들을 이동함으로써 배선길이를 희생시키지 않으면서 배선밀집도를 완화시킨다. 셋째, 셀의 이동에 따른 배선밀집도의 변화 및 배선길이의 변화를 효과적으로 추적할 수 있도록 증분 자료구조 (incremental data structure)를 사용하였기 때문에 실시간으로 변화되는 상황에 적합한 셀 선택이 이루어지며, 실행시간도 매우 빠른 장점이 있다. 마지막으로, 본 논문에서는 MST 넷 모델을 사용하여 배선밀집도를 예측하지만 제안한 기법은 특정 넷 모델에 상관없이 적용할 수 있다. 특히 실제 라우터로부터 배선정보를 얻을 수 있다면, 배선밀집도는 더욱 효과적으로 해결될 수 있다. 제안된 기법을 이용한 실험결과는 배선길이를 희생하지 않으면서 배선밀집도를 매우 효과적으로 개선할 수 있음을 보여준다.

• 한국항행학회논문지
• /
• 제21권5호
• /
• pp.466-471
• /
• 2017

SOTM(satellite communication on the move)는 이동 중 위성통신을 하기 위한 장치이다. 차량이나 무인항공기 외부에 장착하는 물체의 크기 및 중량 제한으로 SOTM 용 안테나의 소형화가 필요하며, 이를 위하여 마이크로스트립, 도파관, 어레이 안테나 등 다양한 형태의 안테나에 대한 연구가 진행되고 있다. 이러한 안테나들은 구조적으로 편파 조정이 어렵다는 문제점이 있어 본 논문에서는 파라볼라 안테나 형태를 사용하여 연구를 진행하였으며, 안테나의 소형화를 위하여 일반적인 원형 형태의 파라볼라 안테나의 반사면을 상하로 잘라 크기 및 높이를 감소시켰다. 그로 인하여 입사된 전자파를 받아들일 수 있는 반사면의 면적이 줄어들어 이득의 저하 및 Spill-over로 인한 G/T지수의 감소로 수신안테나의 성능이 저하하게 되며, 이러한 문제점을 해결하기 위하여 본 논문에서는 부 반사면의 형태를 변형하여 안테나의 면적대비 효율 및 이득을 향상시킬 수 있는 형태로 설계하였다.

• 한국실내디자인학회논문집
• /
• 제23호
• /
• pp.100-108
• /
• 2000

The study intends to systematically arrange and classify the museum layouts in terms of their structure of exhibition space. The exhibition space, here, means the whole area where visitors are allowed to move and visit in museums. Through this, I tied to understand the characteristics and trends comparing and analyzing international and national exhibition space layout, and then grope the standard in case of establishing museum. The first criteria is based on the point of view that the typical museum experience is made in the exhibition space. Accordingly, the exhibition space can be grouped into two categories; one is 'room type' consisting mostly of individual rooms as in classical museums, and the other is 'open plan type' consisting free standing walls as in miesian free plan. The second criteria is dependent on the way how visitors move about in exhibition spaces. In other words, museum layouts can be categorized in terms of mutual connection between individual spaces including exhibition spaces and corridor spaces designated for the purpose of moving. consequently, the layouts can be categorized into five groups such as 'free plan', 'linear type', 'room to room', 'room & corridor' and 'composition type'. The third criteria is about the overall structure of museum layouts including such elements as whether it contains a certain type of central major space or not and whether and how the exhibition spaces are connected to it. By applying these classificatory criteria, the study analyzed and classified 90 sample of museum layouts in order to understand clearly and succintly the spatial characteristics and implications contained in them.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권12호
• /
• pp.5442-5463
• /
• 2016

Designing efficient routing protocols for a wireless sensor network with mobile sinks (mWSN) is a challenging task since the network topology and data paths change frequently as sink nodes move. In this paper, we design a novel lightweight reactive ring based routing protocol called R3, which removes the need of proactively maintaining data paths to mobile sinks as they move in the network. To achieve high packet delivery ratio and low transmission cost, R3 combines ring based forwarding and trail based forwarding together. To support efficient ring based forwarding, we build a ring based structure for a network in a way such that each node in the network can easily obtain its ring ID and virtual angle information. For this purpose, we artificially create a virtual hole in the central area of the network and accordingly find a shortest cycled path enclosing the hole, which serves as base ring and is used for generating the remaining ring based structure. We accordingly present the detailed design description for R3, which only requires each node to keep very limited routing information. We derive the communication overhead by ring based forwarding. Extensive simulation results show that R3 can achieve high routing performance as compared with existing work.

• 한국지진공학회논문집
• /
• 제27권6호
• /
• pp.253-263
• /
• 2023

Non-structural elements, such as equipment, are typically affixed to a building's floor or ceiling and move in tandem with the structure during an earthquake. Seismic forces acting upon non-structural elements traverse the ground and the building's structure. Considering this seismic load transmission mechanism, it becomes imperative to account for the interactions between soil, structure, and equipment, establishing seismic design procedures accordingly. In this study, a Soil-Structure-Equipment Interaction (SSEI) model is developed. Through seismic response analysis using this model, how the presence or absence of SSEI impacts equipment behavior is examined. Neglecting the SSEI aspect when assessing equipment responses results in an overly conservative evaluation of its seismic response. This emphasizes the necessity of proposing an analytical model and design methodology that adequately incorporate the interaction effect. Doing so enables the calculation of rational seismic forces and facilitates the seismic design of non-structural elements.