• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1218-1228
• /
• 1997

The move limit strategy is used to avoid the excessive approximation in the structural optimization. The size of move limit has been obtained by engineering experience. Recently, efforts based on analytic methods are performed by some researchers. These methods still have problems, such as prematurity or oscillation of the move limit size. The existing methods usually control the bound of design variables based on the magnitude. Thus, they can not properly handle the configuration variables based on the geometry in the configuration optimization. In this research, the size of move limit is calculated based on the accuracy of approximation. The method is coded and applied to the two-point reciprocal quadratic approximation method. The efficiency is evaluated through examples.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1130-1138
• /
• 2008

A mobile robot should be designed to navigate with collision avoidance capability in the real world, coping with the changing environment flexibly. In this paper, a novel navigation method is proposed for fast moving mobile robots using limit-cycle characteristics of the 2nd-order nonlinear function. It can be applied to robots in dynamically changing environment such as the robot soccer. By adjusting the radius of the motion circle and the direction of the obstacle avoidance, the mobile robot can avoid the collision with obstacles and move to the destination point. To demonstrate the effectiveness and applicability, it is applied to the robot soccer. Simulations and real experiments ascertain the merits of the proposed method.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.31-37
• /
• 2002

This paper presents a new motion control strategy for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. This paper aims at the development of a new efficient method to control robot motion near and at singularities. The proposed method has focused on generating the optimal joint trajectory for a Cartesian end-effector path within the speed limit of each joint by using the speed limit avoidance as well as the acceleration/deceleration scheme. The proposed method was verified using MATLAB-based simulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.257-260
• /
• 1995

The Field Emission Display promises to improve upon the performance of the traditional CRT, while overcoming the CRTs disadvantages in size and weight which limit its use in portable applications. The technical feasibility of the FED has been reviewed and expeceted to move toward the product development.

• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.33-41
• /
• 2009

본 논문에서는 Limit-cycle 항법의 안정성을 분석하고 path follwer를 제안한다. Limit-cycle 항법은 2차 비선형 함수의 특징을 이용하며, 빠른 이동로봇의 움직임을 제어하기 위해 제안되어졌다. Limit-cycle의 수렴반경과 방향을 조절하여 충돌 없이 장애물을 회피하고, 목표점에 도달할 수 있다. 하지만 지금까지 Limit-cycle 항법의 안정성은 연구되어지지 않았다. 따라서 본 논문에서는 이러한 안정성을 분석하고, Limit-cycle 항법을 로봇축구에 적용하여, 시뮬레이션과 실제 실험에서 제안된 방법을 검증한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.456-461
• /
• 2008

Being a lightweight material, magnesium is increasingly employed in automotive parts. However, because of its hexagonal closed-packed (HCP) crystal structure, in which only the basal plane can move, the magnesium alloy sheets show low ductility and formability at room temperature. Thus the press forming of magnesium alloy sheets has been performed at elevated temperature within range of $200^{\circ}C{\sim}250^{\circ}C$. However, we confirmed that using rotational incremental forming magnesium alloy sheets were formed without any heating at previous study. In this study, at the forming of square cup using rotational incremental sheet forming, the strain distributions were obtained and it was compared with forming limit curve at neck (FLCN). Also, forming limit curves at fracture (FLCF) of magnesium alloy sheets were obtained at elevated temperature and it was compared with the strain distribution of square cup of magnesium alloy sheet. In this study, we confirmed that conventional forming limit curves can not predict rotational incremental forming.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.93-103
• /
• 1997

This study presents a way of improving the stability of fixed scroll in scroll compressors. For the scroll compressor whose fixed scroll is designed to move in the axial direction for the axial compliance, the fixed scroll is under the influence of the overturning moment produced by internal gas forces. Unless the overturning moment is properly compensated by the moments of reaction forces at the suspension of the fixed scroll to the compressor frame, the fixed scroll would exhibit wobbling motion, increasing gas leakage through the gap induced by the wobbling of the fixed scroll between the two scroll members. The conditions on which the wobbling motion can be suppressed have been found analytically; The axial position of the fixed scroll suspension should be made within a certain range. The upper limit of this range is the axial location for the o-rings which are inserted between the fixed scroll and the back pressure chamber to promote sealing for the gas in the back pressure chamber. And the lower limit is mainly determined by the magnitude of the axial sealing force. As long as the axial sealing force is not negative over all crank angles, the lower limit is not above the mid-height of the scroll wrap. Larger axial sealing force lower the lower limit.

• 대한수학회지
• /
• 제38권1호
• /
• pp.25-35
• /
• 2001

In this paper we consider an age dependent branching process whose particles move according to a Markov process with continuous state space. The Markov process is assumed to the stationary with independent increments and positive recurrent. We find some sufficient conditions for he Markov motion process such that the empirical distribution of the positions converges to the limiting distribution of the motion process.

• Structural Engineering and Mechanics
• /
• 제7권1호
• /
• pp.19-33
• /
• 1999

The critical buckling loads of unsymmetrically laminated rectangular plates with a given material system and subjected to combined lateral and inplane loads are maximized with respect to fiber orientations by using a sequential linear programming method together with a simple move-limit strategy. Significant influence of plate aspect ratios, central circular cutouts, lateral loads and end conditions on the optimal fiber orientations and the associated optimal buckling loads of unsymmetrically laminated plates has been shown through this investigation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.454-457
• /
• 2002

This paper presents a new motion control for singularity avoidance in 6 DOF articulated robot manipulators, based on a speed limiting algorithm for joint positions and velocities. For a given task, the robot is controlled so that the joints move with acceptable velocities and positions within the reachable range of each joint by considering the velocity limit. The proposed method was verified using MATLAB-based simulations.