• Journal of Korean Society for Quality Management
• /
• v.35 no.1
• /
• pp.1-9
• /
• 2007

Failure mode and effects analysis (FMEA) is a widely used technique to assess or to improve reliability of products at early stage of design and development. Traditionally, the prioritization of failures for corrective actions is performed by developing a risk priority number (RPN). In practice, due to insufficient evaluation criteria specific to related product and processes, RPN is not properly evaluated. This paper reestablishes an effective methodology for prioritization of failure modes in FMEA procedure. Revised evaluation criteria of RPN are devised and a refined FMEA sheet is Introduced. To verify the proposed methodology, it is applied to RPN evaluation for motors in household appliances.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.160-166
• /
• 1998

In this research a 2-dimensional motion generator composed of two linear motors was developed. The inertia, damping and/or stiffness characteristics of the motion generator can be changed on the real-time basis by properly regulating the force generated by the linear motors. That is, active impedance is implemented without actual change in the physical structure of the motion generator. Control of the motor force is carried out by controlling the input currents supplied to the linear motors based on the combination of the PI controller and feedforward controller. This motion generator can be used to measure a kinesthetic sense associated with the human arm and thus to develop the products for which the kinesthetic sense is taken into account.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.840-845
• /
• 2004

Development of the linear motors is recently required to control a high-speed and high-resolution in the high-integrated and speed process industry. This paper presents vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the vibration characteristics of the advanced products. Vibration experiments are conducted for identifying vibration level during operation. They are also included in the modal test to analyze dynamic characteristics. Analytic data using Finite Element Method (FEM) are compared with the results of the modal. The FEM and experiments make it possible to understand these characteristics. Further, through computer simulation for the behavior of moving part to be vibration source, the best acceleration pattern of moving part movement can be verified to achieve effective moving part positioning and reduce the vibration due to moving part movement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1175-1178
• /
• 2004

On-line partial discharge(PD) monitoring system has been developed to monitor in operating large motor stator insulations. This system makes use of remote diagnosis techniques for the evaluation of PD activity in the control center of thermal power plant. This system can be remotely accessed via a modem to build database, analyze status and interpret the pattern of PD activity. A personnel computer is generally connected to ten motors to continuous measurement of the PD activity. The test data can be easily interpreted by a maintenance staff. For assessing the condition of stator winding in motors, this system ensures a reliable measurement and accurate estimation. Capacitive couplers used for on-line PD measurement have been 80pF. The maximum PD magnitude(Qmax), PD pattern and normalized quantity number(NQN) were performed by this system.

• Korean Journal of Metals and Materials
• /
• v.46 no.8
• /
• pp.489-494
• /
• 2008

The effect of drawing rate on the electrochemical properties of 3003 Al alloys in 5 wt.% NaCl solution was investigated by electrochemical techniques (potentiodynamic polarization test, potentiostatic polarization test, electrochemical impedance spectroscopy (EIS)) and surface analyses (OM, SEM, EDS). Four kinds of automotive pipe materials were prepared (raw material, drawing rate = 5, 10, 15%). As the drawing rate of Al alloy tube increased, the pitting corrosion resistance increased due to the enrichment of Al oxides on the surface.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.219-224
• /
• 2008

The purpose of this paper is to acquire the data related to insulation evaluation of hybrid vehicle traction motors. We carried out a comparative analysis on Insulation Resistance (IR) and Polarization Index (PI) of motor stators according to IEEE Std. 43 and IEC 60085-1 for insulation resistance test standard of rotating machinery. Maximum test voltage which is applied to between a phase and enclosure was set at 500 V. The IRs of the used motors were lower than those of the new ones. The PIs of the used motor were ranges from 0.74 to 1.1 and did not meet the recommendation basis 2 for insulation level H. From the experimental results, we could prepare parameters and basis for insulation evaluation of motor stators by comparative analysis of the IR and the PI.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.794-802
• /
• 2019

Magnetic geared motors are driven using the same operating principle as conventional synchronous motors in which a magnetic gear is embedded. The magnetic geared motor is structurally similar to a magnetic gear. However, by applying currents to the stator coil, the high-speed rotor is rotated by a magnetic field and the low-speed rotor is rotated according to the gear ratio. In this paper, the operational principle of a magnetic geared motor and the magnetic flux density in its inner and outer air gaps are described. Then the magnetic flux density in the two air gaps is used to express a method for calculating the electrical and mechanical output. Results obtained with the analytical calculation method are compared with those of the finite element analysis. Finally, a prototype is used to verify the results of the analytical calculation and FEA.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.479-491
• /
• 2022

This work concerns the investigation of a Q1D methodology employed to study pressure oscillations in solid rocket motors driven by hydrodynamic instabilities. A laboratory-scale solid motor designed to develop vortex-shedding phenomena is analyzed for the whole firing time. The comparison between numerical results and experimental data shows good agreement regarding pressure oscillations signature, especially in the flute-mode behavior, the typical oscillations frequency trend present in any motor liable to hydrodynamic instabilities. Such result ensures the model capability to cope with this particular kind of pressure oscillations source, allowing the investigation of the phenomenon with a lighter and cost savings methodology than CFD simulations.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.52-60
• /
• 1997

This paper proposes the effective method of the software based motion control by using lenear, exponential and bell type discrete filters for acceleration and deceleration of servo motors. Recursive filters are designed in discrete time domain which can reduce computation time and vibration of motors due to load disturbance. Also it deals with the method which decides the time constants of filters when a machine tool is driven at rapid, cutting and jog feedrate. Validity of the proposed method is verified by corner cutting experiments.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.325-332
• /
• 2024

Contemporary power systems demand efficient and sustainable technologies. Single-phase induction motors, while widely used, face efficiency challenges due to inherent rotor losses. Proposed solutions include the Line-start Permanent Magnet Synchronous Motor (LSPMSM), leveraging permanent magnets for enhanced energy density but facing demagnetization and cost issues. Alternatively, the Line-start Synchronous Reluctance Motor (LSRM) operates as a hybrid motor without permanent magnets, reducing rotor losses and potentially improving efficiency. This paper focuses on designing an LSRM rotor for air conditioner compressors, analyzing start-up characteristics and efficiency through finite element analysis. A comparative study with single-phase induction motors provides insights for future motor technology selection, balancing efficiency and other requirements.