• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.34-40
• /
• 2009

The effect of frictional factors on thermal stress and deformation volume of motorcycle brake disk was studied by using a disk-on-pad type friction tester. It has an effect on the frictional factor such as applied load, sliding speed, sliding distance and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors. In this study, thermal stress and deformation volume by using design of experiment with 4 elements were investigated for thermal analysis with regression analysis. Thermal stress and thermal deformation are obtained by the application of temperature from mechanical test. From this study, the result showed that the motorcycle brake disk with ventilated hole 3 had the most excellent thermal stress and deformation volume. The regression equation had a trust rate of 95% for the prediction of thermal stress and deformation volume of motorcycle brake disk was composed.

• Tribology and Lubricants
• /
• 제24권6호
• /
• pp.308-314
• /
• 2008

The thermal stress have an effect on the frictional factor such as applied load, sliding speed, sliding distance and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors on thermal stress of motorcycle break disk. For this, temperature of motorcycle break disk is measured using a disk-on-pad type friction tester with full factorial design containing above 4 elements. and the thermal stress analysis of it was carried out using with ANSYS workbench. From this study, the result was shown that the regression equation which have a trust rate of 95% for thermal stress presumption of motorcycle break disk with frictional factor was composed. It is possible to apply for another automobile parts.

• 대한인간공학회지
• /
• 제36권2호
• /
• pp.157-168
• /
• 2017

Objective: This study aims to understand the motorcycle accident characteristics of food delivery workers and to present basic guidelines on accident prevention through accident. Background: It is known that food delivery workers have a high ratio of self-employed and youth workers, and occupations with frequent disasters. Therefore the occupation is known to really be in need of accident prevention policy. Method: This study analyzed the data of motorcycle crashes of 1,310 food delivery workers that have been approved as on-duty industrial crashes since 2015. The accident characteristics were examined by dividing them into driver related factors and accident related factors. Results: Among the motorcycle crashes of food delivery workers, 99.2% of the victims were males, 82.6% had less than six months of work experience. 76.2% of the victims were employed by the companies with less than five workers. In addition, there was a difference in accident characteristics according to age, type of cuisine, accident time of the day, injured organs and injured body part. Conclusion: The results of this study can be used as baseline data to devise systematic measures to prevent motorcycle crashes of food delivery workers. Application: Preventative measures for novice young part time workers including safety education/training need to be established.

• Structural Engineering and Mechanics
• /
• 제48권5호
• /
• pp.661-679
• /
• 2013

In this work, the safety performance of a commercial motorcycle helmet already placed on the market is assessed. The assessed motorcycle helmet is currently homologated by several relevant motorcycle standards. Impacts including translational and rotational motions are accurately simulated through a finite element numerical framework. The developed model was validated against experimental results: firstly, a validation concerning the constitutive model for the expanded polystyrene, the material responsible for energy absorption during impact; secondly, a validation regarding the acceleration measured at the headform's centre of gravity during the linear impacts defined in the ECE R22.05 standard. Both were successfully validated. After model validation, an oblique impact was simulated and the results were compared against head injury thresholds in order to predict the resultant head injuries. From this comparison, it was concluded that brain injuries such as concussion and diffuse axonal injury may occur even with a helmet certified by the majority of the motorcycle helmet standards. Unfortunately, these standards currently do not contemplate rotational components of acceleration. Conclusion points out to a strong recommendation on the necessity of including rotational motion in forthcoming motorcycle helmet standards and improving the current test procedures and head injury criteria used by the standards, to improve the safety between the motorcyclists.

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.596-601
• /
• 2014

In this study, driving efficiency and the safety of motorcycle drivers due to the mounting gradient of motorcycle protective glass are investigated through flow analysis. Mounting gradients of motorcycle protective glass in models 1, 2, and 3 are $60^{\circ}$, $70^{\circ}$, and $80^{\circ}$, respectively. Wind velocity of 100 km/h is applied to the protective glass installed at the front of each model. The flow resistance values of models 2 and 3 are 1.2 and 1.5 times, respectively, that of model 1. The driving efficiency of model 1 is the highest among the three models. Pressure to the driver's face in models 2 and 3 is 1.2 times higher than in model 1. Because the pressure to the driver's face in model 1, with mounting gradient of $60^{\circ}$, is the lowest among the three models, model 1 is the safest. This result can be applied to improve the safety of motorcycle drivers.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.143-154
• /
• 2014

PURPOSES : This study drew factors affecting motorcycle accidents in Seoul by severity using an ordered probit model and aimed to analyze and verify the drawn influence factors. METHODS : As the severity of the accidents could be classified into three types (fatal injury, serious injury and minor injury), this study drew the factors affecting accidents by a comparative analysis employing an ordered probit model, removed the variables that would not secure significance sequentially to construct a model with high explanatory power regarding the factors affecting the severity of motorcycle accidents, and calculated the marginal effect of each factor to understand the degree of each factor's impact on the severity. First, Model 1 put in all variables; Model 2 was constructed by removing the variables of the road surface conditions that could not meet the level of significance (p=0.608); Model 3 was constructed by removing gender variable (p=0.423); and Model 4 was constructed finally by removing age variable (p=0.320). RESULTS : As a result of an analysis, statistically significant variables were time of occurrence, type of accident, road alignment and motorcycle displacement, and it turned out that the impacts on the severity were in the following order: a road alignment of left downhill, the type of motorcycle-to-vehicle accidents and a road alignment of a flatland on the left. The significance of the models was tested using the likelihood ratio, the level of significance and suitability statistics about them, and as a result of the test, the significance level and suitability of the constructed models were all excellent. In addition, the model accuracy indicating the accuracy of a predicted value compared to that of the value actually observed was 70.3% for minor injury; 70.1% for serious injury; and 68.6% for fatal injury, and the overall accuracy was 70.2%, which was very high. CONCLUSIONS : As a result of an analysis of motorcycle accidents in Seoul through the ordered probit model and the marginal effect, it turned out that their severity increased in nighttime accidents as compared to daytime ones and gradually increased in the order of motorcycle-to-vehicle accidents, motorcycle-to-person ones and the ones involving motorcycle only. As a result of an analysis, the severity of accidents in road alignments of left downhill, left flatland and straight downhill increased as compared to those in a road alignment of straight flatland and that the severity of accidents of motorcycles with a displacement larger than 50cc was higher than that of those with a displacement smaller than 50cc.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.530-541
• /
• 2008

The early stage of 3D anthropometry data has been used to obtain qualitative rather than quantitative information. However recent 3D body scanners as a common research tool for anthropormatric measurments have made it possible to obtain body surface data of sufficient resolution and accuracy. The purpose of this study is finally to develop motorcycle jacket for enhanced comfort and fit, to test the accuracy and reliability of 3D measurments of motorcycle riding posture, and to analyze the change in 20's adult male's body surface measurements between the standard anthropometric position and motorcycle riding posture. The results of this study were as follows: There were no significant differences between the study and Size Korea measurments in total traditional measuring items and most of measuring items, such as length, circumference antropometric items and interscye items though not waist back length and upper arm circumference. A comparison of 3D body surface measurments in the two different measuring postures, the bodysurface measurments such as waist front length, biacromion length, front interscye, arm length, underarm length in the motorcycle riding posture decreased than that in basic posture, whereas waist back length, back interscye, C.T.W length increased. The body surface measurments such as chest, bust, upper circumference in the motorcycle riding posture decreased than that in basic posture, whereas neck, waist, hip, elbow circumference increased.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.533-542
• /
• 2020

본 연구에서는 기동 순찰대 오토바이 가상훈련 시스템 구현의 개발 기술을 바탕으로 PC를 기반으로 한 모터사이클 시뮬레이터를 개발하였다. 모터사이클 시뮬레이터를 현실감 있게 직접 운전하고 있다는 느낌을 받도록 하기 위해서는 운전자와 시뮬레이터 사이에서 상호 신뢰성 있는 신호의 전달 및 조작 느낌이 중요하다. 이를 위해서 실차와 동일한 조작 느낌을 생성하기 위하여 실차의 각 서브시스템이 모터사이클 시뮬레이터에 그대로 적용될 수 있는 방법에 대한 연구를 수행하여 시스템을 구축하였으며, 이러한 결과를 바탕으로 운전자에게 현실감 있는 조작 느낌을 제공할 수 있는 피드백 큐 생성 방법을 개발하였다. 차량 동역학은 차량 시뮬레이터에 탑승한 운전자가 운전 중 조작하는 조향 휠, 가감속 페달 등으로부터 입력을 받아 실시간으로 차량의 운동을 예측하고, 그 결과를 시각, 음향 시스템에 전달하여 필요한 시각 및 운동 큐를 생성케 하는 시뮬레이터의 중심요소이다. 시뮬레이션 동역학 주요 요구내용에 대해 정리하고자 한다.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5156-5163
• /
• 2011

전기 구동 이륜차는 우수한 연비 및 환경공해 능력 때문에 가장 유망한 미래 교통수단 중의 하나이다. 실제 전기 이륜차 시제품을 제작하기 전에 신뢰성이 확보된 시뮬레이션 프로그램을 통하여 전기 이륜차의 설계인자 최적화와 동력원의 능력을 평가할 필요가 있다. 이 같은 과정을 통하여 전기 이륜차 시스템 설계 과정에서의 소요비용을 줄일 수 있다. 본 논문에서는 수월하게 Simulink와 PSAT을 이용하여 구동 및 동력 시스템을 모델링할 수 있는 Matlab 기반의 전기 이륜차 해석 프로그램을 제시하였다. 전기 이륜차의 최대 출력, 에너지 능력, 충전 상태, 등판각도와 같은 설계 인자 해석을 실험과 시뮬레이션을 병행하였다. 본 연구에서 개발된 모델에 의해서 예측된 해석결과는 실험에 의해서 얻어진 결과와 양호하게 일치하였다.

• Tribology and Lubricants
• /
• 제23권4호
• /
• pp.156-161
• /
• 2007

The friction test using disk-on-pad type was carried out and regression analysis with friction parameters was applied fur wear loss presumption of motorcycle break disk. The wear loss has an effect on the frictional factor such as applied load, sliding speed, and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors on wear loss of motorcycle break disk. From this study, the result was shown that the regression analysis equation containing 4 elements were constructed and this equation had a trust of 95% in wear loss presumption of motorcycle break disk. It is possible to apply for another automobile parts.