• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.81-86
• /
• 2006

Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in operating of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS(Personal Computer based Telescope Control System) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC(brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the user friendly GUI(Graphic User Interface).

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2429-2431
• /
• 2003

능동 시각 시스템은 카메라 시선 방향을 조정할 수 있는 장치로, 기존의 고정식 스테레오 카메라가 가질 수 없는 여러 가지 장점으로 인해 최근 많은 연구가 진행되고 있다. 능동 시각 시스템을 이용하여 움직이는 물체를 추적하는 경우, 목표 위치가 제어 주기마다 바뀌게 되는데 이 때 시스템의 현재 속도를 고려하지 않는다면, 급격한 속도의 변화로 인해 저크(jerk)가 크게 발생하게 된다. 저크는 물체 추적 성능에도 영향을 미칠 뿐만 아니라, 전원단의 잡음 발생을 유발시켜 제어기의 동작을 방해하며, 시스템에 기계적인 손상을 주기도 한다. 이러한 문제점을 해소하기 위해 기존의 방법들은 스플라인이나 고차 다항식의 계산 방법을 사용하였으나 계산량의 복잡도로 인해 다축 제어가 필요한 능동 시각 시스템에서 구현하기가 어렵다. 본 논문에서는 삼각 함수를 이용한 종(bell) 모양의 속도 프로파일을 이용해서 저크 탄생을 억제할 수 있는 제어기 구조를 제안한다. 제안된 방법은 간단한 계산량으로 저가의 마이크로프로세서에서도 실시간으로 동작이 가능하며 임의의 시점에 임의의 속도로 움직이고 있는 시스템에 저크를 최소화할 수 있는 지령 속도를 만들어 낼 수 있다. 제안된 방법은 시뮬레이션과 실제 시스템에 적용하여 그 유용성을 검증하였다.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.293-298
• /
• 2005

The purpose of this study was the development of a multi-joint robot manipulator for milking robot system. The multi-joint robot manipulator was controlled by 5 drivers with driver controller through the position information obtained from the image processing system. The robot manipulator to automatically attach each teat cup to the teats of a milking cow was developed and it's motion was accurately measured with error rate. Results were as follows. 1. Maximum errors in position accuracy were 4mm along X-axis, 4.5mm along Y-axis and 0.9mm along Z-axis. Absolute distance errors were maximum 4.8mm, minimum 2.7mm, and average 3.6mm. 2. Errors of repeatability were maximum 3.0mm along X-axis, 3.0mm along Y-axis, and 0.5mm along Z-axis. Distance error values were maximum 3.2mm, minimum 2.2mm, and average 2.5mm. It is envisaged that multi-joint robot manipulator can be applicate to milking robot system being developed in consideration of the experiment results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1448-1453
• /
• 2015

In this paper, we propose an alternative method of communication to improve the reliability of in-vehicle networks by jointly using wireless communication networks. Wired Communication networks have been used in vehicles for the monitoring and the control of vehicle motion, however, the disconnection of wires or hardware fault of networks may cause a critical problem in vehicles. If the network manager detects a disconnection or faults in wired in-vehicle network like the Controller Area Network(CAN), it can redirect the communication path from the wired to the wireless communication like the Zigbee network. To show the validity and the effectiveness of the proposed in-vehicle network architecture, we implement the Electronic Stability Control(ESC) system as ECU-In-the-Loop Simulation(EILS) and verify that the control performance can be kept well even if some hardware faults like disconnection of wires occur.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1793-1794
• /
• 2007

Since it has an advantage of possibility to control using experimentally given coefficient, PID Control is the most widely used method of control in the field of industry. However, since PID controller is not able to reflect the inherent characteristics of individual systems, it needs to be accompanied by additional techniques to supplement. Also, it has disadvantage that it is hard to find a satisfactory coeffi cient when the state of the system's dynamic characteristics and static characteristics are different each other. When the dynamic one shows up, it means the state of system shows a great amount of difference from that of desired such as the moment of beginning control or change of desired state. But, if the state of the system comes close to the desired state, the static characteristics shows up in the system. There are many solutions suggested to overcome problems according to the conversion of two examples of motion shown above. This paper is to confirm PID control's integration ingredient windup phenomenon, and experiment through technique of pre vention of windup actually using PLC(Programmable Logic Co ntroller), and to verify the change in characteristics of control.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.249-256
• /
• 2010

This paper presents performance analysis of a quarter-vehicle magneto-rheological(MR) suspension system with respect to different tire pressure. As a first step, MR damper is designed and manufactured based on the optimized damping force levels and mechanical dimensions required for a commercial mid-sized passenger vehicle. After experimentally evaluating dynamic characteristics of the manufactured MR damper, the quarter-vehicle MR suspension system consisting of sprung mass, spring, tire and the MR damper is constructed in order to investigate the ride comfort. After deriving the equations of the motion for the proposed quarter-vehicle MR suspension system, vertical tire stiffness with respect to different tire pressure is experimentally identified. The skyhook controller is then implemented for the realization of quarter-vehicle MR suspension system. Ride comfort characteristics such as vertical acceleration RMS and weighted RMS of sprung mass are evaluated under various road conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.419-426
• /
• 2008

As pulse detonation engine(PDE) does not need compression mechanisms such as compressors because self-sustained detonation waves are able to compress propellant gases by their incident shock waves, the PDE can have a simple straight-tube structure. In this study, we propose an autonomous driving valve system of the PDE, which fill premixed gases into the PDE tubes at high frequency with high mass flow rate. The proposed valve is composed of only three parts: a piston, a cylinder, and a spring. This valve system can produce intermittent flow at high mass flow rate, and also can keep stable reciprocal motion by using the propellant-gas enthalpy. When the cylinder content product is assumed to be constant, experimental results of the mass flow rate were approximately equal to the calculation model. We confirmed the autonomous driving valve performance by experiments, and concluded that this extremely simple valve with no electrical power and controller can be used as the PDE propellant supply system.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.65-77
• /
• 1994

This paper presents a derailed application procedure of the linear quadratic(LQ) theory for a SWATH heave and pitch control. A time domain model of coupled, linear time-invariant second order differential equations is derived from the frequency response model with the frequency dependent added mass and damping approximated as constant values at the heave natural frequency. Wave exciting forces are modeled as a sum of sinusoids. A systematic selection procedure of state and control weighting matrices is presented to obtain good transient behavior and acceptable fin movement. The validity of this controller design process is throughly investigated by simulations both in time domain and frequency domain and singular value plots of transfer function matrices. The finally designed control system shows good overall performances revealing that the applicability of the present study is proved successful.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.4
• /
• pp.382-390
• /
• 2009

The submerged body near the free surface is disturbed by the 1st and 2nd order wave forces, which results in unstable movements when no control is applied. In this paper, the vertical motions of the submerged body are analyzed, and the time-variant nonlinear system for the vertical motions of the submerged body is transformed to the time-invariant linear system in state space. Next, depth controller of the submerged body is designed by using LQR control, one of the modern optimal control technique. Numerical simulation shows that effective depth controls can be achieved by LQR control.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.606-623
• /
• 2019

The path following problem of a ship sailing in restricted waters under wind effect is investigated based on Robust $H_{\infty}$ Guaranteed Cost Control (RHGCC). To design the controller, the ship maneuvering motion is modeled as a linear uncertain system with norm-bounded time-varying parametric uncertainty. To counteract the bank and wind effects, the integral of path error is augmented to the original system. Based on the extended linear uncertain system, sufficient conditions for existence of the RHGCC are given. To obtain an optimal robust $H_{\infty}$ guaranteed cost control law, a convex optimization problem with Linear Matrix Inequality (LMI) constraints is formulated, which minimizes the guaranteed cost of the close-loop system and mitigates the effect of external disturbance on the performance output. Numerical simulations have confirmed the effectiveness and robustness of the proposed control strategy for the path following goal of a ship sailing in restricted waters under wind effect.