• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.580-586
• /
• 2002

We investigated the effect of ionic component on crystalline morphology development during isothermal annealing in a sodium neutralized sulfonated poly(ethylene terephthalate) ionomer (Ion-PET) by time-resolved small-angle x-ray scattering (TR-SAX S) using synchrotron radiation. At early stage in Ion-PET, SAXS intensity at a low annealing temperature (Ta = 120 $^{\circ}C)$ decreased monotonously with scattering angle for a while. Then SAXS profile showed a peak and the peak position progressively moved to wider angles with isothermal annealing time. Finally, the peak intensity decreased, shifting the peak angle to wider angle. It is revealed that ionic aggregates (multiplets structure) of several nm, calculated by Debye-Bueche plot, are formed at early stage. They seem to accelerate the crystallization rate and make fine crystallites without spherulite formation (supported by optical microscopy observation). From decrease of peak intensity in SAXS,it is suggested that new lamellae are inserted between the preformed lamellae so that the concentration of ionic multiplets in amorphous region decreases to lower the electron density difference between lamellar crystal and amorphous region. In addition, analysis on the annealing at a high temperature (Ta = 210 $^{\circ}C)$ by optical microscopy, light scattering and transmission electron microscopy shows a formation of spherulite, no ionic aggregates, the retarded crystallization rate and a high level of lamellar orientation.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.2
• /
• pp.64-70
• /
• 1996

Early weathering products of anorthosite were investigated by using scanning electron microscopy in order to trace the development of halloysite particles and aggregates. Tiny short tubes or spheres precipitate on the plagioclase surface in the initial stage of weathering and form the compact globular aggregates. With continued growth, several globules are coalesced into wrinkled halloysite aggregates, and short tubes or spheres in globules grow into long tubes forming sheaf-like aggregates. Particle shape of halloysite varies with changing supersaturation degree of weathering solution, and determines the morphology of halloysite aggregates.

• Food Science of Animal Resources
• /
• v.40 no.4
• /
• pp.497-511
• /
• 2020

This study aimed at comparing the storage stability, fatty acids profile, volatile flavor compounds and eating quality of Hanwoo beef longissimus thoracis (LT) muscles between two marbling morphological groups (fineness and coarseness). The 1⁺ grade Hanwoo LT muscles were measured for marbling fleck morphology at the 13^th thoracic vertebrae location by using computerized image analysis. Results reveal that both marbling groups had similar proximate composition (protein, fat, moisture and collagen), color and technological quality traits (p>0.05). However, the coarse marbling group presented greater C18:2n6 and polyunsaturated fatty acids contents compared to the fine marbling group (p<0.05). Furthermore, the fine marbling group presented lower volatile basic nitrogen (VBN) and 2-thiobarbituric acid reactive substance (TBARS) contents compared to the coarse marbling group after 14 d storage (p<0.05). Also, higher amounts of C18:2n6 oxidation-derived volatile compounds such as hexanal and 3-ethyl-2-methyl-1,3-hexadiene, were found in the coarse marbling group. In term of sensory aspects, the finely-marbled group received higher scores of flavor and taste compared to the coarse marbling group (p<0.05). Overall, the marbling flecks morphology partially showed its effects on the storage stability, fatty acids profile and eating quality of the 1⁺ grade Hanwoo beef LT muscle.

• Clinical and Experimental Reproductive Medicine
• /
• v.22 no.3
• /
• pp.293-299
• /
• 1995

Objective: To investigate the effects of sperm morphology and their co-incubation with oocytes on the outcome of IVF and ICSI. Design: Strict morphology of washed sperm was assessed by Diff-Quick staining method before or after insemination. And the relationships between strict morphology and outcome (fertilization, embryo development and pregnancy) of IVF(with co-incubation) and ICSI (without co-incubation) were determined. Patients: Two-hundreds-and-sixty-three cycles of IVF and ninety-six cycles of ICSI were analyzed in order to clarify the influence of strict sperm morphology of spermatozoa on outcome of IVF and ICSI. These were divided into four groups. according to fertilization method and sperm morphology(Group 1: IVF, ${\geq}$12%, n:227; Group 2: IVF, <12%, n:36; Group 3: ICSI, ${\geq}$ 12%, n=48; Group 4: ICSI, <12%, n=48). Results: The fertilization rates of better morphology groups were higher than those of poor groups: Group 1(68.1%) > Group 2(62.1%), Group 3(78.1%) > Group 4(71.5%). There was no difference in embryo cleavage rates among four groups (>90%), Regarded with the good embryo rates, Group 1(56.8%) was significantly higher than Group 2(42.3%)(P<0.01), but there was no difference between Group 3(64.7%) and Group 4(61.2%). The pregnancy rates were also higher in better morphology groups as well as fertilization rates: Group 1(34.8%)> Group 2(16.7%)(p<0.05), Group 3(40.0%) > Group 4(23.0%)(p=0.08). Conclusion: Co-incubation with poor morphology sperm might adversely affect the quality of embryos. And strict sperm morphology may represent the ability to establish successful pregnancy. In short, the strict sperm morphology can be a good predictor of IVF and ICSI outcome.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.320-333
• /
• 2019

In this study, a physics-based 3D morphology model for the estimation of an erosion rate of nourished beach is newly proposed. As a hydrodynamic module, IHFOAM toolbox having its roots on the OpenFoam is used. On the other hand, the morphology model comprised a transport equation for suspended sediment, and Exner type equation derived from the viewpoint of sediment budget with the bed load being taken to accounted. In doing so, the incipient motion of sediment is determined based on the Shields Diagram, while the bottom suspended sediment concentration, the bed load transport rate is figured out using the bottom shearing stress directly calculated from the numerically simulated flow field rather than the conventional quadratic law and frictional coefficient. In order to verify the proposed morphology model, we numerically simulate the nonlinear shoaling, breaking over the uniform beach of 1/m slope, and its ensuing morphology change. Numerical results show that the partially skewed, and asymmetric bottom shearing stresses can be successfully simulated. It was shown that sediments suspended and eroded at the foreshore by wave breaking are gradually drifted toward a shore and accumulated in the process of up-rush, which eventually leads to the formation of swash bar. It is also worth mentioning that the breaker bar formed by the sediments dragged by the back-wash flow which commences at the pinnacle of up-rush as the back-wash flow gets weakened due to the increased depth was successfully duplicated in the numerical simulation.

• Journal of Veterinary Clinics
• /
• v.24 no.4
• /
• pp.563-567
• /
• 2007

This study evaluated the effect of ANTORIN R-10(pFSH), a commercially available follicle stimulating hormone on ovarian morphology, on follicular development and serum estradiol levels in rats. Immature female Wistar S/T rats(27 day old; 80-100 g B.wt) maintained under controlled environmental conditions($22{\pm}2^{\circ}C$; 50% humidity; 12 h light/12 h dark cycle) with free access to standard laboratory feed and tap water were utilized. Animals were allowed to acclimatize to the new environment for at least 2 weeks before being included in the experiment. Rats were randomly allotted to 5 groups(Control, SL 0.1AU, SH 0.2AU, TL 0.1AU and TH 0.2AU). ANTORIN R-10 was subcutaneously injected twice daily for 3 days. Twenty hours after hormone treatment, blood was collected to estimate the serum estradiol $17-\beta$ concentration. Immediately, all rats were sacrificed and the ovarian morphology, ovary weight and number of follicles were recorded. Ovaries were fixed for histomorphological examination. Higher standard and treatment groups were significantly increased on ovary weight and the number of follicles more than 1mm compared with lower standard and treatment. However, no difference revealed between standard and treatment groups. ANTORIN R-10 was similar effects of follicles development and maturation compared with House standard FSH.

• Fisheries and Aquatic Sciences
• /
• v.2 no.1
• /
• pp.25-31
• /
• 1999

Developmental morphology of the red alga, Osmundea crispa (Hollenberg) Nam from California was studied on the basis of liquid-preserved and herbarium specimens. Vegetative axial segment of the species produces two pericentral cells and one trichoblast. Spermatangial filaments (branches) are derived from apical and epidermal cells in pocket-shaped apical pit with an ostiole-like upper opening. Procarp-bearing segment of female trichoblast produces five pericentral cells, of which the fifth functions as supporting cell of carpogonial branch. Tetrasporangial production occurs in random epidermal cells in apical pit of branchlets, and two presporangial cover cells show parallel arrangement to stichidial axis. As this vegetative and reproductive development is included in the generic delineation of Osmundea Stackhouse, O. crispa among the known Osmundea species is characterized by habit forming compact cushion-like clump with angular to terete thallus. It is also distinguished from O. hybrida (AP. de Candolle) Nam without the compressed thallus by the number of pericentral cells in procarp-bearing segment and shape of spermatangial pit. Taxonomic implication of the shape of spermatangial pit is also included.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.221-224
• /
• 2003

Polyvinyl chloride (PVC)/gypsum Polymer blend materials were prepared by melt blending of PVC with gypsum and additives. Effect of gypsum content on the properties of PVC/gypsum Polymer blend material was studied by investigating physico-mechanical properties, thermal properties and morphology development. It was found that the replacement of gypsum for methylene-butadiene-sarene (MBS) component in PVC/gypsum polymer blend material enhanced the tensile strength, but gradually decreased its impact strength. Besides, with the increase of gypsum content, the elongation at break of material gradually decreased. The Presence of the different gypsum contents made a shift of g1ass transition temperature and increased the thermal stability as well as the processing temperature range of polymer blends. The observation of morphology, the results of the physico-mechanical properties and thermal properties proved simultaneously that PVC/gypsum Polymer blend material with the gypsum content of 22.56 wt.% reached the optimum results among five kinds of PVC/gypsum Polymer blend materials investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.139-146
• /
• 2000

The development of high performance materials is very important subject in order to enhance the properties of bearings whose role is to transfer energy harmoniously by reducing the problem of friction and wear down, etc. between the interacting solid surfaces in relative motion under high loads in comply with mechanical operating mechanism of engines. In this study, several (100-x)Al-xSn coating films (where x=85, 75, 65 atomic % at Al) on substrates which are abt. 2mm thickenss of Kelmet layer sintered back steel were prepared by using RF sputtering system. These coating films were observed the morphology by SEM(Scanning Electron Microscope) and investigated the crystal structure by XRD(X-ray Diffractor) for their properties. And friction coefficient of these films was measured by ball-on-disc tester for their tribological properties. From the experimental results, it was shown that high performance properties of bearing can be improved greatly by controlling the composition and morphology of material surface with effective use of the plasma-assisted sputtering process.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.21-26
• /
• 2005

The effects of carbon black on the fatigue lift and the fracture morphology and the carbon black dispersion of the carbon-black filled natural rubbers, for the vibration-proof, were investigated. Different kinds of carbon blacks resulted in different fatigue lift and fracture morphologies, which are classified by micro-scale and macro-scale fracture morphologies. These results be related to the size distribution of carbon black particles, the development of the carbon black agglomerate and the combine forces between the carbon black and the natural rubber.