• 한국음향학회지
• /
• 제42권4호
• /
• pp.271-284
• /
• 2023

본 연구는 IEC 60050-801:1994 국제 표준을 기준으로 남한 산업표준과 북한 국가규격의 음향학 전문용어 431개를 비교 분석하고 통합 알고리즘을 사용하여 남북한 음향학 용어 통합안을 제시하였다. 용어가 완전히 같은 형태인 AA형은 139개(32.3 %), 어문규범의 차이로 인해 표기 형태가 다른 Aa형은 35개(8.1 %), 형태가 완전히 다른 AB유형은 257개(59.6 %)로 확인되었다. 형태적으로 같은 유형의 용어보다 다른 유형의 용어가 2배 이상 많았으나 내용 면에서 대부분 용어는 충분히 이해하고 유추할 수 있는 범위 안에 있었다. 형태가 다른 음향학 전문용어 통합에서는 북한 전문용어가 178개(61 %), 남한 전문용어가 76개(26 %)로 채택되었다. 이와 같은 결과는 북한 전문용어가 고유성이 압도적으로 높았고, 남한 전문용어는 경제성이 상대적으로 높았기 때문이다. 용어 순화를 통한 고유성과 최신 기술 용어의 대중 활용을 높일 수 있는 경제성 기준을 충족하는 음향학 전문용어 통합 체계 구축이 필요하다. 본 연구는 남북한 음향학 전문용어를 최초로 비교하고 통합안 제시에 의의가 있으며 다음과 같은 제언으로 연구 한계를 극복하고자 한다. 첫째, 정부는 남북한 학술 교류 및 표준화 공통 안을 마련할 수 있도록 지원 및 법적인 장치를 마련하고 북한 관련 연구 데이터에 쉽게 접근할 수 있는 연구 환경을 조성해야 한다. 둘째, 음향학 용어 데이터를 남북한이 공유하고 통합 음향학 용어사전을 발간하도록 노력해야 한다. 셋째, 추후 남북이 전문용어 위원회를 함께 발족하여 표준 개정이 동시에 이루어지도록 노력해야 한다.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.283-294
• /
• 1998

This paper presents an investigation why Mn-steel high pressure gas cylinders have been failed in service. The fractured cylinders have been collected to identify the reason of the failure using various methods. The undamaged, new cylinder has also been tested for the base data. We examined the chemical compositions and fracture facets as well as the mechanical properties of the vessels. The microstructural observations of the fractured regions of the cylinder did not indicate the noticeable defects which might cause the failure. The experiments of cylinders on the compositinal and mechanical tests showed that the cylinder was in good shape according the standards of gas pressure vessel. The morphological analysis of the fracture surfaces concluded that the origin of the failure was the local weak segments induced by the external impact to the cylinder, which result in a sudden, fast fracture.

• 대한한의학방제학회지
• /
• 제11권2호
• /
• pp.213-232
• /
• 2003

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.109-119
• /
• 2006

Objectives : This study was performed to approach of properties-flavours theory and the study of morphological standard in CORNI FRUCTUS. Methods : The properties-flavours theory were attempted with bibliographic method and various climate-information. The external-internal morphological standards were determined by using stereoscope and butanol series. Results and conclusion : 1. The significant analysis for the corni fructus as the properties-flavours theory, is a follow-up survey of the effect written in the official oriental medicine book. 2. The other analytic methods according to the gathering time, processing or storing system or especially nature or growth environment(altitude, temperature,. the mean moisture, and the agronomical survey) by way of the explanation of properties-flavours theory appears so many insufficiency at the many cases. 3. The external and internal characteristics according to the shape of original plant or herbal states, entirely correspond to all the literature on this subject. 4. According to the place of production, there are some different points. (l) In the external shapes, it is reasonable that if we make the basic standard of classification by the sharpness of color, the existence of gloss and the size of products. In the case of the Korean products, it shows bright and glossy color totally, but in the case of North Korea products, it shows black and lackluster. And in the case of the foreign products, it has softer body than Korea one and shows white color on the surface. (2) In the internal shapes, the Korea products has a thicker cuticle layer than the foreign one, and has fewer ca-oxalate in the parenchyma cell.

• 대한본초학회지
• /
• 제31권4호
• /
• pp.61-69
• /
• 2016

Objectives : This study is to propose discriminative keys with stereoscope for minute seed herbs easily mixed up, but hard to discriminate by naked eyes: Alli Tuberosi Semen(ATS)✳Alli Fistulosi Semen(AFS), Malvae Semen(MS)✳ Abutili Semen(AS), Plantaginis Semen(PS)✳Schizonepetae Semen(SS).Objectives : We reviewed the description of original plants and medicinal herbs from literature. The specimen of original plant were collected, determinated and compared to samples in the market. Primary classification was performed with naked eyes. and we found out other discrimination keys for non-distinctive herbs with stereoscope. Discrimination keys were set as the morphological criteria of authentic herbs, percentage of adulteration, and standards for discriminating genuine herbs from adulteration.Results : 1) ATS is bigger, has reticulate pattern on protuberant side and unique garlic chives taste. AFS which is usually mixed up, is smaller, has 1~2 ridges and unique welsh onion taste. 2) MS is smaller, has no villus, but its length of bumps are similar. AS easily mixed up, is bigger and has white villus. Its upper side bump is longer and more sharp. 3) PS has dent at middle of the back side. It becomes very sticky when it is put or boiled in water. SS which can be mixed up has no dent and low viscosity compared to PS.Conclusions : With this result, we propose discriminative keys which can identify the original plants and processed herbal state of six herbs. Because minute medicinal herbs are hardly distinguishable by sensory test, It is essential to differentiate by using stereoscope.

• 대한본초학회지
• /
• 제35권1호
• /
• pp.9-18
• /
• 2020

Objectives : We tried to establish standards for genuine by discriminating 3 kinds of pollen and spore herbs that are highly to be mixed with each other. Using an scanning electron microscope, we prepare a standard for discriminating external morphological characters of minute herbs, thereby contributing to the stable supply of genuine herbal medicines. Methods : Standard samples were confirmed by literature review on external morphological characteristics of original plants and herbal medicines, and collection and identification of original plants. The herbal medicines on the market were purchased and classified with using naked eye observation and magnifier. Finally, micromorphological identifications were conducted using an scanning electron microscope. Results : 1. Pini Pollen was clearly distinguished by its relatively medium size and a pollen grain with two swollen reticulate sacci at both ends. The verrucate ornamentation on the exine surface of the corpus and a sunken leptoma germ pore may be used as a discrimination criteria. 2. Typhae Pollen was distinguished by its relatively small size and a saccus on the end of a pollen grain. Reticulate ornamentation of exine surface of the corpus, and a slightly clear ulcerate germ pore can be used as a discrimination criteria. 3. Lygodii Spora was distinguished by its relatively large triangular-ovate shape and trichotomous fissure. Verrucate-tuberculate ornamentation of exine surface and trilete aperture could be used as a discrimination criteria. Conclusion : These results indicate that the use of electron microscopy is very effective for discriminating the external morphology of minute herbal medicines.

• 대한본초학회지
• /
• 제22권1호
• /
• pp.71-79
• /
• 2007

Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Polygoni Multiflori and Cynanchi Wilfordii Radix. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results: 1. The external characteristics of original plants: Polygonum Multiflorum has alternate leaves, and its flower with white color blooms at the shoot apex or leaf axil. In the other hand, Cynanchum wilfordii has opposite leaves, and its flower with yellowish green color blooms at the leaf axil. 2. The physical characteristics of herbal slates: Polygoni Multiflori Radix is red-brown in outer surface pink-brown in section. In the other hand, Cynanchi Wilfordii Radix is earthly-brown in outer surface greyish white in section. 3. The physical characteristics according to the place of production: Demonstrable difference according to the place of production is not seen. Polygoni Multiflori Radix is brown or dark brown in outer surface, soft $Yellow{\sim}dark$ brown in section. In the other hand, Cynanchi Wilfordii Radix is white in outer surface, $white{\sim}weak$ red in section, and has power type. 4. The internal characteristics: Polygonum multiflorum has hetero-vascular bundle and lignification of cork layer is progressive. In the other hand, Cynanchum wilfordii has not hetero-vascular bundle, and lignification of cork layer is weak. Conclusion: In the future, many fundamental study such as how to discriminate between Polygoni Multiflori Radix and Cynanchi Wilfordii Radix in origin and efficacy will be necessary. Also the standard of discrimination must be specific and distinct in that several kinds of fo-ti has been traded. It is considered the results of this study will be furnish κ I the basis Lo succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• 복식문화연구
• /
• 제20권6호
• /
• pp.923-936
• /
• 2012

Apparel companies define their target customers to integrate consumers' needs into their product development processes. The sizing standards play a significant role in ready-to-wear garment business. Consumers' body build and sizes are different according to gender, age, and body type. The consumers' morphological feature of the one geographical area has changed with immigration, aging, and lifestyle change. In this study the way of defining body types in the standard garment sizing systems published in USA., UK, Germany, Japan, and Korea were compared. The results of this study show that most of the systems classified the body types by the index value. The chest-waist drop value was used for men's body type classification. Women's body types were defined by hip proportion. The hip-bust drop value was used for it. German and European garment sizing systems provide a wide range of men's body types. US men's garment sizes are developed for very conservative body type. US women's garment sizing system has had clearly defined women's body types. The Misses body types projected in the US garment sizing system had changed as women's waist girth got bigger compared to the past. In 2011 the US Misses sizes were divided into Curvy Misses size and Straight Misses size by the hip-waist drop value. The Curvy Misses sizes have smaller waist girth and larger hip girth than the Straight Misses sizes.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.21-38
• /
• 1993

In order to investigate the influence of recycling, a laboratory method simulating the papermaking process was used for assessing the effects of recycling on fiber properties. Sw-BKP, Hw-BKP and BGP were disintegrated and beaten to about 42$^{\circ}$SR-44$^{\circ}$SR by a valley beater. After beating, these pulps were dewatered by centrifuge and dried at 90$^{\circ}C$ for 72hrs. This recycling process(sequence of wetting, defiberating, dewatering and drying) was repeated seven times. Physical, mechanical and optical properties of recycled pulps were evaluated by TAPPI Standards. Morphological changes occurred through recycling process was observed by SEM. Sheet density decreased with recycling. The largest drop in density occurred during the first recycling. The porosity values decreased with recycling. Mechanical properties such as tensile, burst strength and folding endurance, decreased with recycling. However tear strength of Sw-BKP and mixtured pulp increased at the first recycling. Optical properties such as brightness, opacity and light scattering coefficient, increased with recycling. However, brightness of mixtured pulp gradually decreased with recycling. Fibrillated outer layer of the fiber was gradually removed from the surface with recycling. As a result of recycling, crinkles on the fiber surface were found to be more folded.

• 한국농촌건축학회논문집
• /
• 제14권4호
• /
• pp.135-142
• /
• 2012

This study is aimed to investigate the dimension feature of the plane about the economic type farming village Korean-style house progressed in the Chonnam province and Longitudinal feature and tries to reveal this feature through the comparing analysis with the traditional house positioned in the Chonnam province. This result is as follows. First, the main feature in plane is the setting up the column interval in front when comparing the house of Happy Village and traditional house. In case house of the Happy Village, after firstly fixed the limited scales, sizes are determined, this is due to control the set up in the post interval in this in range. Second, in the case of the traditional houses, 0.68 ratio of the building height about the side length and 0.19 ratio of the eaves extrusion about the side length are consistent ratio about dimensions. However, there is no consistent ratio or fixed law, the various dimensions show up in case of the house of Happy Village. It will be inevitable that space of the post increases for the convenience of life of the modern people. However, it has to sublate and to disregard as the identity of the morphological shown up in the Korean-style house the more various construction standards will need to be presented.