• Korean Journal of Veterinary Service
• /
• v.27 no.3
• /
• pp.249-256
• /
• 2004

The Korea chinese chives are a major edible vegetable and they are traditionally been used as a folk medicine. However recently studies on the Allium tuberosum are mainly on the morphological property and the chemical constituent. There are no reports concerning hematological changes in dogs administrated ethyl acetate extracts of Korea chinese chive. This experiment was conducted to investigate the hematological changes in dogs administrated ethyl acetate extracts of the Korea chinese chives($5m{\ell}/mg$) for 6 days. During administration blood samples were collected at 3h, 6h, 12h and then on daily basis until day 6. Blood samples were analyzed red blood cell(RBC), packed cell volume(PCV), hemoglobin concentration(Hb), mean corpuscular volume(MCV), mean corpuscularl hemoglobin concentration(MCHC), reduced glutathion(GSH), and met-hemoglobin concentration. The RBC count was significantly(p<0.01, p<0.05) decreased during experimental periods. Packed cell volume, hemoglobin concentration were not showed significantly difference during experimental periods. The MCV was significantly(p<0.01, p<0.05) increased from 3 hours after administration to day 4. The MCHC was significantly(p<0.05)decreased on day 6. GSH concentration was not showed significant difference during experimental periods and the met-hemoglobin concentration was significantly(p<0.05) increased on day 3.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.157-169
• /
• 1996

Polyester yarns and fabrics containing three levels of $TiO_2$ delusterant were hydrolyzed with NaOH and examined for physical and morphological changes. The mechanical propertis and hand values of alkaline hydrolyzed polyester fabrics were measured using KES-FB system. Also, the relationship between the morphology and the mechanical property of alkaline hydrolyzed polyester fabrics was analyzed. The results are as follows: 1. At an initial stage of alkaline treatment, the concentration of $TiO_2$ did not affect the weight loss of the treated yarns. But by increasing treatment time, the effect of the concentration of $TiO_2$ on the weight loss of the fiber became more pronounced. The weight loss were increased in the following order; fulldull> semidull> clear 2. The effect of hydrolysis on yarn tensile strength seems to be more related to the size of the pits on the fibers rather than the number of pits. 3. Axially oriented pits occurred along the hydroyzed, delustered fiber surfaces, while such pitting was absent on hydrolyzed fiber containing no $TiO_2$. The number of voids across the surface of a fiber increased with an increase in the amount of TiOa incorporated into the fibers. The size of the voids depended on the treatment time of hydrolysis rather than the concentration of TiOa. 4. The mechanical properties and hand values of polyester fabrics were changed by alkaline treatment but were identical regardless of the concentration of TiOa. While the mechanical properties of polyester fabrics depended on the structural change of the fibers and the yarns within the fabrics as the fiber diameter became progressively smaller rather than the size and number of pits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.386-395
• /
• 2017

For scientific research, a number of acoustic surveys using commercial echosounders equipped in fishing vessels were conducted throughout the world; however, few studies were performed in South Korea. Hence, this research is an preliminary study for presenting the application of a sounder from a fishing vessel. The fishing operations using a pair trawler (7 Cheonghae) was conducted in the Northwest-Western sea of Jeju Island from 20 to 23 April, 2016. Substantial impulse noises and attenuated signals were eliminated by the latest algorithms. Acoustic signals were grouped into the fish aggregations and long layer-like signals. The fish aggregations appeared between 30 and 60 m, and long layer-like signals showed the diurnal vertical migration. Energetic, morphological and positional properties of the fish aggregations and layer-like signals were described. The fish aggregations appeared mainly between sunrise and sunset; however layer-like signals tended to be presented regardless of time in consideration of the time series analysis. On the basis of the consignment sales, Scomberomorus niphonius, the target species of F/V 7 Cheonghae, was the highest catch with 4,280 kg (74.6%) and might have appeared in fish aggregations and layer forms.

• Korean Journal of Microbiology
• /
• v.48 no.3
• /
• pp.220-224
• /
• 2012

In order to reduce harmful biogenic amines in the traditionally fermented soybean products, five isolates with biogenic amines-degrading property were obtained from 83 traditionally fermented soybean products. The strains were found to reduce biogenic amines including histamine, tyramine, putrescine, and cadaverine by 27 to 92% in the cooked soybean containing 5.3% of each biogenic amine over 10 days of incubation. The morphological and biochemical tests and the phylogenetic relationships based on 16S rRNA gene sequences indicated that the five isolates were most closely related to Bacillus subtilis or B. amyloliquefaciens. The use of selected strains would be a potential control measure in manufacturing traditionally fermented soybean products that are difficult to control biogenic amine levels.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2974-2978
• /
• 2014

$Mn_3O_4$/multi-walled carbon nanotube (MWCNT) composites are prepared by chemically synthesizing $Mn_3O_4$ nanoparticles on a MWCNT film at room temperature. Structural and morphological characterization has been carried out using X-ray diffraction (XRD) and scanning and transmission electron microscopies (SEM and TEM). These reveal that polycrystalline $Mn_3O_4$ nanoparticles, with sizes of about 10-20 nm, aggregate to form larger nanoparticles (50-200 nm), and the $Mn_3O_4$ nanoparticles are attached inhomogeneously on MWCNTs. The electrochemical behavior of the composites is analyzed by cyclic voltammetry experiment. The $Mn_3O_4$/MWCNT composite exhibits a specific capacitance of $257Fg^{-1}$ at a scan rate of $5mVs^{-1}$, which is about 3.5 times higher than that of the pure $Mn_3O_4$. Cycle-life tests show that the specific capacitance of the $Mn_3O_4$/MWCNT composite is stable up to 1000 cycles with about 85% capacitance retention, which is better than the pure $Mn_3O_4$ electrode. The improved supercapacitive performance of the $Mn_3O_4$/MWCNT composite electrode can be attributed to the synergistic effects of the $Mn_3O_4$ nanoparticles and the MWCNTs, which arises not only from the combination of pseudocapacitance from $Mn_3O_4$ nanoparticles and electric double layer capacitance from the MWCNTs but also from the increased surface area, pore volume and conducting property of the MWCNT network.

• Korean Journal of Materials Research
• /
• v.20 no.8
• /
• pp.412-417
• /
• 2010

Mo thin films were used for the back electrode because of the low resistivity in the Mo/$CuInGaSe_2$ contact in chalcopyrite solar cells. $1\;{\mu}m$ thick Mo thin films were deposited on soda lime glass by varying the Ar pressure with the dc-magnetron sputtering process. The effects of the Ar pressure on the morphology of the Mo back electrode were studied and the relationships between the morphology and electro-optical properties, namely, the resistivity as well as the reflectance of the Mo thin films, were investigated. The resitivity increased from $24\;{\mu}{\Omega}{\cdot}cm$ to $11833\;{\mu}{\Omega}{\cdot}cm$; this was caused by the increased surface defect and low crystallinity as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The surface morphologies of the Mo thin films changed from somewhat coarse fibrous structures to irregular and fine celled structures with increased surface cracks along the cell boundaries, as the Ar pressure increased from $3{\times}10^{-3}$ to $3{\times}10^{-2}\;Torr$. The changes of reflectances in the visible light range with Ar pressures were mainly attributed to the surface morphological changes of the Mo thin films. The reflectance in the visible light range showed the highest value of 45% at $3{\times}10^{-3}\;Torr$ and decreased to 18.5% at $3{\times}10^{-2}\;Torr$.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.6
• /
• pp.429-438
• /
• 2010

The use of cellulolytic lactic acid bacteria in new method to prepare high nutrition complementary foods was investigated. For the screening of cellulolytic lactic acid bacteria, more than 1,150 bacterial colony were isolated from diluted infant feces samples. A typical strain which appeared the most excellent cellulolytic activities was identified novel acidophilic Enterococcus sp. TO-94 through the results of morphological, biochemical and chemotaxonomic characteristics and 16S rDNA sequencing. The optimal lactic acid fermentation conditions of Omija(Schizandra chinensis Baillon) by Enterococcus sp. TO-94 were as follows: pH and temperature were 3.0 and $37^{\circ}C$, respectively, and fermentation time was 20hrs. The fructose and glucose were major free sugar and the contents were 5.83 and 4.30 mg/g after fermentation, respectively. The contents of lactic acid and acetic acid were 9.84 mg/g and 2.08 mg/g after fermentation, respectively. The vitamin $B_1$, $B_2$, niacin, folic acid and C were major vitamin in the fermented broth, the contents were 1.5~3 times higher than those of initial fermentation time. Also, the contents of polyphenol and anthocyanine were 3.8 and 1.2 times higher than those of initial fermentation time.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.114-119
• /
• 2005

We investigated compatibilizing effects of electrical properties such as charge distributions and electrical breakdown in blends of low density polyethylene (LDPE) / polystyrene (PS) with poly [styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS), the triblock copolymer. The blends with $70\;wt\%$ of LDPE and $30\;wt\%$ of PS were prepared through a melt blending in a batch type kneader at a temperature of $220^{\circ}C$ when the SEBS content increased up to $10\;wt\%$. Scanning electron microscopy (SEM) was investigated for observation of morphology of LDPE / PS blends increasing SEBS contents. The morphological observation showed that addition of SEBS results in the domain size reduction of the dispersed PS phase and a better interfacial adhesion between LDPE and PS phases. Measurements of space charge distributions for blends was carried out with pulsed electroacoustic (PEA) method. It was possible to observe that the amount of charge storage in the LDPE / PS blends decreased wiか increasing of SEBS content. The location of SEBS at a domain interface enables charges to move from one phase to the other via domain interface and results in a indicative decrease in the amount of space charge for the LDPE / PS blends with SEBS. Electrical breakdown strength of these blends was observed. It was found that the maximum breakdown strength of the blend was 51.55 kV/mm. These results were better than 38.38 kV/mm of LDPE used electrical insulator for cables and were caused by crystalinity of blends. Because the crystalinity of blends were lower than LDPE, electrical breakdown strength of LDPE / PS blends is higher than that of LDPE. We evaluated the possibility of these blends for insulating material substituted LDPE.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.469-472
• /
• 1999

CeO$_2$ thin films have used in wide applications such as SOI, buffer layer, antirflection coating, and gate dielectric layer. CeO$_2$takes one of the cubic system of fluorite structure and shows similar lattice constant (a=0.541nm) to silicon (a=0.543nm). We investigated CeO$_2$films as buffer layer material for nonvolatile memory device application of a single transistor. Aiming at the single transistor FRAM device with a gate region configuration of PZT/CeO$_2$ /P-Si , this paper focused on CeO$_2$-Si interface properties. CeO$_2$ films were grown on P-type Si(100) substrates by 13.56MHz RF magnetron sputtering system using a 2 inch Ce metal target. To characterize the CeO$_2$ films, we employed an XRD, AFM, C-V, and I-V for structural, surface morphological, and electrical property investigations, respectively. This paper demonstrates the best lattice mismatch as low as 0.2 % and average surface roughness down to 6.8 $\AA$. MIS structure of CeO$_2$ shows that breakdown electric field of 1.2 MV/cm, dielectric constant around 13.6 at growth temperature of 200 $^{\circ}C$, and interface state densities as low as 1.84$\times$10$^{11}$ cm $^{-1}$ eV$^{-1}$ . We probes the material properties of CeO$_2$ films for a buffer layer of FRAM applications.