• Macromolecular Research
• /
• v.9 no.4
• /
• pp.197-205
• /
• 2001

Platelet adhesion onto elastic polymeric biomaterials was tested in vitro by perfusing human whole blood at a shear rate of 100 sec$\^$-1/ for possible verification of mechanisms of initial platelet adhesion perfusion of blood on the polymeric substrates was performed after treatments either with or without pre-adsorption of 1% blood plasma, and either with or without residence of the protein-preadsorbed substrate in phosphate buffered solution. The surfaces employed were elastic polymers such as poly(ether urethane urea), poly(ether urethane), silicone urethane copolymer, silicone rubber and poly(ether urethane) with the anti-calcifying agent hydroxyethane bisphosphate. Each polymer surface treated was exposed in vitro to the dynamic, heparinized whole blood perfused for upto 6 min and the surface area of platelets initially adhered was measured by employing in situ epifluorescence video microscopy. The blood perfusion was performed on the surfaces treated at the following three different conditions: directly on the bare surfaces, after protein pre-adsorption and after residence in buffer for 3 days of the surfaces protein pre-adsorbed for 2 h. The effects of blood plasma pre-adsorption on the initial platelet adhesion was surface-dependent. The amount of the adsorbed fibrinogen and the surface coverage area of the adhered platelets were dependent on the surface conditions whether substrates were bare surfaces or protein pre-adsorbed ones. To test an effect of possible morphological (re)orientations of the adsorbed proteins on the initial platelet adhesion, the polymeric substrate pre-adsorbed with 1% blood plasma was immersed in phosphate buffered solution for 3 days and then exposed to physiological blood perfusion. The surface area of the platelets adhered on these surfaces was significantly different from that of the surfaces treated with protein pre-adsorption only. These results indicated that platelet adhesion was dependent on the surface property itself and pre-treatment conditions such as blood perfusion without any pre-adsorption of proteins, and blood perfusion either after protein pre-adsorption or after subsequent substrate residence in buffer of the substrate pre-adsorbed with proteins. Understanding of these results may guide for better designs of blood-contacting materials based on protein behaviors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.542-548
• /
• 2013

Soil properties and yields of liriopis platyphylla were investigated to establish soil suitability of Korean liriopis platyphylla at 116 farms in Korea. Morphological and physical properties of the soils were investigated along with the average yield of 2~3 years. The impact factors of soil properties to the yield of liriopis platyphylla were selected based on standard error of each factor. The yields of liriopis platyphylla showed the greatest values when the morphology was alluvial plains, when the drainage was well or moderately well, when the slope was 0-2%, the texture was coarse loamy, when the gravel content was less than 15% and when the available soil depth was more than 100 cm. Contribution factors of soil properties to the yields were 0.15 by morphology, 0.15 by drainage level, 0.13 by slope, 0.18 by texture, 0.16 by gravel content and 0.23 by available soil depth, respectively. Soil suitability classes were set as follows; the best suitable land if score was greater than 92, suitable land if score ranged from 91 to 86, the possible land if the score ranged from 85 to 83, and low productive land if score was less than 82. According to the criteria, 17.8% of the production area was the best suitable land, 43.1% was suitable land, 17.3% was possible land, and 21.8% was low productive land. The sum of both the best and suitable lands were 60.9% of the farm area of Miryang in Gyeongsangnam-do.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.2
• /
• pp.113-118
• /
• 1994

A bacterial strain NS-83 isolated from soil was able to produce an extracellular thermostable protease. The strain was identified as Pseudomonas aeruginosa based on its morphological and physiological characteristics. A thermostable protease from this strain has been purified to homogeneity as judged by SDS-PAGE and isoelectric focusing. The purification procedures included hydrophobic interaction, ion exchange, and gel filtration chromatography. The $M_r$ and the pl of the enzyme were 32,000 and 5.9, respectively. The optimal pH at 55$^{\circ}C$ and the optimal temperature at pH 7.0 were 8.0 and 60$^{\circ}C$, respectively. The D-values of the enzyme at 60, 65, and 70$^{\circ}C$ were 22, 2.1, and 0.75 hrs, respectively. The enzyme activity was significantly inhibited in the presence of 1 mM o-phenanthroline or EDTA, suggesting that the enzyme is metalloprotease. The $K_m$, and $V_{max}$ for Hammarsten casein were found to be 3.2 mg/ml and 0.918 unit/ml, respectively. These enzymatic properties were similar to those of elastase produced from P. aeruginosa IFO 3455, but the enzyme was clearly different from the reported elastase, in respect to $Ca^{++}$ effects on enzyme-thermostability. This property, together with amino acid composition analysis, confirmed that the enzyme differs from the known P. aeruginosa elastase.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.147-159
• /
• 1983

In general, herbicides have been classified according to selectivity, mobility. time of application, methods of application, mode of action and chemical property and structure. However, there was no generally accepted classification system for practical use in the field. The primary processes affected by the majority of herbicides are the growth process through cell elongation and/or cell division, the photosynthetic process specifically the light reaction, the oxidative phosphorylation and the integrity of the membrane systems. The usual approach in the study of the mechanism by which herbicides kill or inhibit the growth of plants is to initially determine the morphological phototoxicity systems, The mechanism by which a herbicide kills a plant or suppresses its development is actually the resultant effect of primary and secondary(or side) effects. In most instances, the death of the plant is due to the secondary effects. To induce the desired response, a herbicide must be able to gain entry into the plants and once inside, to be transported within the plant to its site(s) of activity in concentrations great enough. Obstacles to the entry and movement of herbicides in plants are generally classified by leaf and soil obstacles, translocation obstacles and biochemical obstacles, and these obstacles are also strongly influenced by plant species and by environmental factors such as light, temperature, rainfall and relative humidity. And hence, in most instances, results obtained from laboratory or greenhous vary from those of field experiment. Author attempted to classify herbicides from the field experiment using the two-dimensional ordination analysis to obtain practical information for selecting effective herbicides or to choose effective herbicide combinations for increasing herbicidal efficacy or reducing the chemical cost. Based on this two-dimensional diagram, desired herbicides or combinations were selected and further investigated for the interaction effects whether these combinations are synergistic, additive or antagonistic. From the results, it was concluded that these new approach could possibly be give more comprehensive informations about effective use of herbicide than any other systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.412-417
• /
• 2014

Soil properties and yields of red been were investigated to establish soil suitability of Korean adzuki bean at 166 farms in Korea. The soil morphological and physical properties were investigated by 1:5,000 scale average yield of 2~3 years. The impact factors to the adzuki bean yields and soil properties were selected based on standard error of each factor. The yields of adzuki bean showed the greatest values when the morphology was alluvial plains, the drainage was well or moderately well, the slope was 2~7%, the texture was fine loamy, the gravel content was less than 15% and the available soil depth was more than 100 cm. Contribution factors of soil properties to the yields were 0.18 of morphology, 0.18 of drainage level, 0.23 of slope, 0.20 of texture, 0.11 of gravel content and 0.10 of available soil depth, respectively. Soil suitability levels were set as the best suitable land if score was greater than 90, suitable land if score ranged from 89 to 85, the possible land if the score ranged from 79 to 84 and low productive land if score was less than 78. According to the criteria 37.5% of the production area was the best suitable land, 29.4% was suitable land, 22.3% was possible land and 10.8% was low productive land. The best and suitable lands were total of 66.9% in Gyeongju, Gyeosangbuk-do.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.287-297
• /
• 2007

The procedures for identifying channel network are suggested by exploring the scaling property between the local slope and the contributing area, given that the area threshold criterion is an indispensable complement to the slope-area threshold criterion. Through the use of the above procedures and the field data, the basin slopes illustrate the trends of large scatters in space for the geomorphologic/topographic factors. According to the scaling regimes of them both the forms of landscape can be classified as topographic divergence and convergence. The presentation of the procedures proposed in this study is implemented in the case study on Seolma experimental catchment in Korea. As a result the dynamic behaviors of basin are confirmed, and thus the dynamics of channel head advance and channel network are shown to represent better than the method using the topographic chart manually.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.25.2-25.2
• /
• 2011

Recently, thin film capacitors used for vehicle inverters are small size, high capacitance, fast response, and large capacitance. But its applications were made up of liquid as electrolyte, so its capacitors are limited to low operating temperature range and the polarity. This research proposes using Ni-P alloys by electroless plating as the electrode instead of liquid electrode. Our substrate has a high aspect ratio and complicated shape because of anodic aluminum oxide (AAO). We used AAO because film thickness and effective surface area are depended on for high capacitance. As the metal electrode instead of electrolyte is injected into AAO, the film capacitor has advantages high voltage, wide operating temperature, and excellent frequency property. However, thin film capacitor made by electroless-plated Ni on AAO for full-filling into etched tunnel was limited from optimizing the deposition process so as to prevent open-through pore structures at the electroless plating owing to complicated morphological structure. In this paper, the electroless plating parameters are controlled by temperature in electroless Ni plating for reducing reaction rate. The Electrical properties with I-V and capacitance density were measured. By using nickel electrode, the capacitance density for the etched and Ni electroless plated films was 100 nFcm-2 while that for a film without any etch tunnel was 12.5 nFcm-2. Breakdown voltage and leakage current are improved, as the properties of metal deposition by electroless plating. The synthesized final nanostructures were characterized by scanning electron microscopy (SEM).

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.31-36
• /
• 2007

It has been reported that the surface properties of the plasma treated material were changed while maintaining its bulk properties. In this study, surface modification of nylon fiber by plasma treatment was tried to attain high water-repellency Nylon fiber was treated with RF plasma under a vacuum system using various parameters such as gas specious, processing time and processing power. Morphological changes by low pressure plasma treatment were observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Moreover, the mechanical and inherent properties were analyzed by tensile strength, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The high water-repellency property of nylon fiber was evaluated by a water-drop standard test under various conditions in terms of aging effect. The results showed that the water-repellency of plasma-surface-treated nylon fiber was greatly improved compared to untreated nylon fiber.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1232_1233
• /
• 2009

Paraquat is well-known to cause hepatotoxic responses in human and other mammal species. In solution, it forms free radicals and charge-transfer complex of which formation plays an important role in determination of its biological activity in the presence of various anions. The HepG2 cells were cultured onto a quartz crystal sensor which is possible to detect the density and a viscosity changes using the resonance frequency (F) and the resonance resistance (R). The plot of F-R diagram is able to explain the rheological change of cells onto the surface of the quartz crystal sensor. In this paper, we investigated the physical properties of the HepG2 cells cultured onto a ITO electrode of the quartz crystal sensor according to the paraquat injection at various concentrations (100 mM, 10 mM, 1 mM). We also observed the morphological changes with a micro CCD camera, simultaneously. The HepG2 cells were cultured onto the ITO electrode surface of the quartz crystal modified a collagen film in $CO_2$ incubator. After the paraquat injection, we observed the changes of the morphologies by the micro CCD camera depending on time and analyzed the physical changes of cells on the electrode surface of quartz crystal using F-R diagram. From all results, we proved the effect of paraquat at various concentrations which is led to an apoptosis such as weakening and death of the cells by oxidation and reduction reaction that were produced the superoxide anions and other free radicals.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.151-156
• /
• 2003

A strain YB-10 was isolated from soil as a producer of the extracellular $\beta$-D-galactosidase, which catalyzes the hydrolysis of lactose. The strain YB-10 was identified as Streptomyces sp. on the basis of its cultural, morphological and physiological properties. After treating culture supernatant of the isolate with ammonium sulfate, the precipitated protein was used as a crude $\beta$-galactosidase for analyzing its reaction properties with para-nitrophenyl-$\beta$-D-galactosidase(pNP-$\beta$Gal) as a substrate. The $\beta$-galactosidase showed its maximal activity at pH 6.0 and 6$0^{\circ}C$. The enzyme was also active on lactose. The hydrolyzing activity of $\beta$-galactosldase for pNP-$\beta$Gal and lactose was decreased by galactose. Its hydrolyzing activity far lactose was also decreased by glucose, but the activity for pNP-$\beta$Gal was increased to 1.8-folds by glucose.