• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.77-82
• /
• 1995

With the aim to utilize pine wood(Pinus densiflora Sieb. et Zucc.) as an interior building materials, such as flooring material, monoethylene glycol(MEG) resin solution was impregnated into greenwood. Specimens of three different qualities, that is, normal wood, resinous wood and compression wood, were prepared. Distribution of resin element(phosphorus) in MEG resin solution-impregnated woods and preservative effectiveness against brown rot fungi(Tyromyces palustris and Serpula lacrymans) of these woods were investigated. The results were as follows: 1. The concentration of phosphorus into cell walls of resinous wood and compression wood was lower compared to that of normal wood. This shows that the quality of wood has an influence on the penetration of MEG resin solution into the wood. It was shown from a leaching test that MEG resin could be leached out easily from the cell walls. 2. The resinous wood and compression wood, even without MEG resin solution impregnation had high decay resistance. For normal wood, significant improvement of preservative effectiveness was observed after impregnation of MEG resin solution. It was shown that MEG resin was leached out from the woods after leaching test, resulting in the reduction of preservative effectiveness. From this result, suitability of MEG resin solution-impregnated woods as an interior materials was recognized.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.903-914
• /
• 2008

본 연구는 ethylene oxide로부터 monoethylene glycol을 주제품으로 생산하는 상용화된 실제 공정의 생산 능력 증가시에 필요한 공정 모사와 에너지 절감을 위한 최적화 연구로서, 공정에 관여하는 다성분계의 기/액 상평형 거동을 NRTL-RK식으로 나타내고, 필요한 총 91개의 2성분계쌍의 상호작용 파라미터 값들로는 8개의 2성분계쌍에 대해서는 Aspen $Plus^{TM}$ 상용 모사기(Ver. 2006)에 내장된 값, 28개의 쌍에 대해서는 상평형 데이터를 문헌에서 조사하여 회귀분석하고 나머지 2성분계에 대해서는 모사기 내의 추산 기능을 이용하여 구한 값을 사용하였으며, 공정 모사 결과와 실제 공정 데이터와의 비교를 통해 상평형 계산의 정확성을 확인한 후, 모사기에 내장된 민감도 분석 기능을 사용하여 전체 에너지 소모량에 대한 각 장치의 민감도를 조사하여 적절한 조절변수를 선정하고 모사기 내에 내장되어 있는 순차적 2차 계획법에 의한 최적화 기능을 이용하여 공정 전체의 에너지 절약을 위한 최적화 작업을 수행하였다.

• Corrosion Science and Technology
• /
• 제16권4호
• /
• pp.161-166
• /
• 2017

The qualitative composition of active components of the corrosion inhibitor CGW-85567 was studied. It was found that С18:2 and С18:1 imidazolines and the corresponding imidazolin-amides are the major components. The HPLC/MS technique was developed for their determination in the water solutions of monoethylene glycol (MEG). Industrial application of the inhibitor showed that MEG solution retained high concentration of the inhibitor for a long time after ceasing its addition into pipelines. Low values of the partition coefficients (0.010-0.014) of imidazolines in the system "water solution of MEG (concentration of MEG 62-85% v/v) - gas condensate" have allowed to pass on from the technology of continuous pumping of the inhibitor into protected pipelines to the periodic dosing technology. Taking into account a long time of circulation in the system and high temperatures during MEG regeneration process possible degradation products of the inhibitor were studied. N, N-dimethyl-dodecanamine-1, and N, N-dimethyl-tetradecanamine-1 were identified as major degradation products of the corrosion inhibitor CGW-85567.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.41-49
• /
• 2020

Jabon (Anthocephalus cadamba) is a fast-growing wood species that is widely utilized for light construction and other purposes in Indonesia. The objectives of the current study were to determine the effects of monoethylene glycol (MEG) and SiO₂ nanoparticles (nano SiO₂) impregnation treatment on the dimensional stability and density of jabon wood and to identify the characteristics of impregnated jabon wood. Wood samples were immersed in water (as untreated), MEG, 0.5% MEGSiO₂, then impregnated by applying 0.5 bar of vacuum for 60 min, and then applying 2.5 bar of pressure for 120 min. The results showed that impregnation with MEG and Nano SiO₂ had a significant effect on the dimensional stability of jabon wood. Polymers can fill cell walls in wood indicated by increasing weight percentgain, antiswelling efficiency, bulking effect, and density, then decreasing in water uptake value. Jabon wood morphology by using SEM showed that MEGSiO₂ polymers can cover part of the pitsin the wood vessel wall of jabon. This finding was reinforced by EDX results showing that the silicon content was increased due to the addition of SiO₂ nano. The XRD diffraction pattern indicated that MEGSiO₂ treatment increased the degree of crystallinity in wood samples. Overall, treatment with 0.5% MEGSiO₂ led to the most improvement in the dimensional stability of 5-year-old jabon wood in this study.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.1-8
• /
• 2017

Hydrolysis resistance and mechanical property changes of polyketone (POK)/glass fiber (GF) composites were investigated for GF concentrations varying between 30 and 50%. The hydrolysis resistance of GF filled POK and polyamide66 (PA66, hydrolysis resistant grade) composites were compared. As shown by the experimental results, increasing the immersion time of the composites in a monoethylene glycol (MEG)/water solution at $120^{\circ}C$ had no impact or resulted in slightly decreased mechanical properties such as the tensile strength, tensile modulus, and strain at break in case of POK composites, whereas the mechanical properties of PA66 composites showed a significant drop. Increasing GF concentrations increased the tensile strength, tensile modulus, flexural strength, and flexural modulus of POK composites; however, impact strength did not show significant changes. Hydrolysis mechanisms of POK and PA66 are discussed.

• 청정기술
• /
• 제29권2호
• /
• pp.79-86
• /
• 2023

Ru-MACHO-BH 촉매는 α, β-불포화 알데히드 화합물들의 카르보닐기(carbonyl group)만을 선택적으로 수소화 반응을 수행할 수 있다. 그러나 α, β-불포화 알데히드의 수소화 반응은 불균일 딜즈-앨더 반응을 수반하여 부산물인 이합체를 다량 생성한다. 본 연구에서는 Ru-MACHO-BH (Carbonyl hydrido (tetrahydroborato) [bis (2-diphenyl phosphino ethyl) amino] ruthenium(II)) 촉매를 이용하여, α, β-불포화 알데히드의 한 종류인 메타아크릴 알데히드(methacryl aldehyde) 화합물의 카르보닐기만 선택적으로 수소화 반응을 시켜 메타아릴 알코올(methallyl alcohol)을 합성하며, 동시에 2가 알코올을 부반응 억제제로 적용하였다. 이 결과는 모노 에틸렌 글리콜(mono ethylene glycol)이 이합체의 생성을 현저히 저감 시킬 수 있음을 보여주고 있다. 이러한 결과를 바탕으로 비닐기의 화학적 상호작용을 효과적으로 억제할 수 있는 하이드로퀴논을 사용하여 메타아크릴 알데히드에 존재하는 비닐기의 이합체 형성을 효과적으로 억제할 수 있었으며, 결국 메타아크릴 알데히드의 전환율을 상승시킬 수 있었다. 최종적으로, 고가의 귀금속 균일촉매인 Ru-MACHO-BH의 투입량을 1/10로 줄인 상태에서 원하는 생성물인 메타아릴 알코올의 선택도는 약 90% 이상, 수율은 약 80% 이상을 확보할 수 있었다. 이 결과는 수율 감소를 최소화하는 동시에 고가의 촉매 사용량을 저감하여 경제성을 향상시킬 수 있는 방법을 찾을 수 있게 하였다.