• Journal of radiological science and technology
• /
• v.26 no.2
• /
• pp.49-56
• /
• 2003

The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.484-491
• /
• 2000

Soft denture liners or conditioners may be valuable therapeutic materials. The life of these liners is short and varies, but it can be extended by the use of a mono-poly(polymethyl methacrylate coating material). This study determined whether coating three temporary soft denture liners with mono-poly affected the resiliency of soft liners, and evaluated the ability of mono-poly to prevent water absorption and alcohol loss from the underlying soft liners. $20{\times}12mm$ cylindrical specimens of Coe-Soft, Soft-Liner, Coe-Comfort soft lining materials were made and divided into two groups of mono-poly uncoated(control) and mono-poly coated specimens. Specimens were immersed in water and compressed on an instron universal testing machine and weighed at initial, 24 hours, 1 week, 2 weeks, and 4 weeks. Resiliency was determined by measuring the energy absorbed by the soft liners when stressed to a specific yield point. Mono-poly coating significantly increased the resiliency of the Soft-Liner, but had no effect on the other soft liners. Among the 3 soft liners, Soft-Liner showed the hightest resiliency and modulus of elasticity. The weight loss in Soft-Liner was the least among the 3 liners, and the weight loss in Coe-Soft was decreased by monopoly coating.

• Journal of the Korean Ceramic Society
• /
• v.18 no.3
• /
• pp.192-200
• /
• 1981

This study deals with the low temperature ($25^{\circ}C$-$600^{\circ}C$) properties of Kaolin-Phosphate-water systems. Phosphoric acid, mono aluminum phosphate, mono ammonium phosphate, the mixture of phosphoric acid and mono aluminum phosphate, and the mixture of phosphoric acid and mono ammonium phosphate were used to characterize the M.O.R. of the systems with to quantity of phosphates, curing time, and firing temperature. Firing shrinkage, viscosity, surface tension, DTA, TGA, and X-ray diffraction patterns were also measured in order to investigated the factors of strengthening. The results of this study were summarized as follows: 1. The M.O.R. of kaolin-phosphate systems were stronger than that of Kaolin-water system at room temperature or low temperature($25^{\circ}C$-$600^{\circ}C$). Though it was increased according to the longer curing time, the higher temperature, and the more addition of phosphate, the M.O.R. were decreased in the case of 10 wt% phosphate addition in the system of phosphoric acid, mono aluminum phosphate and phosphoric acid-mono aluminum phosphate. 2. When the concentration of Phosphate was at 4 wt%, the M.O.R. of specimen cured at $25^{\circ}C$ and added to the phosphoric acid was strongest among the specimens in added to the others phosphates. Whereas, when the concentration of phosphate was above 6wt%, the M.O.R. of specimen cured at $25^{\circ}C$ and added to the phosphoric acid mono ammonium phosphate system cured at $25^{\circ}C$ was the strongest. 3. The M.O.R. of the specimen heated, in the temperature range of 15$0^{\circ}C$-1$600^{\circ}C$, and added to the mixture of phosphoric acid-mono aluminum phosphate system or phosphoric acid-mono ammonium phosphate system was stronger than that of specimen added to Phosphoric acid, mono-aluminum Phosphate or mono-ammonium phosphate alone. 4. The bonding force of phosphate binders was more closely related to surface tension than viscosity and it tended to be inversely proportional to surface tension. The bonding force after heating treatment seemed to be caused by the change of structure of phosphate according to heating.

• Wind and Structures
• /
• v.34 no.4
• /
• pp.371-383
• /
• 2022

Buildings with mono-sloped roofs are used for different purposes like at railway platforms, restaurants, industrial buildings, etc. Between two types of mono-slope roofs, clad and unclad, unclad canopy types are more vulnerable to wind load as wind produces pressure on both upper and lower surfaces of the roof, resulting in uplifting of the roof surface. This paper discusses the provisions of wind loads in different codes and standards for Low-rise buildings. Further, the pressure coefficients on mono-slope canopy roof available in wind code and standards are compared. Previous experimental studies for mono-slope canopy roof along with the recent wind tunnel testing carried out at Indian Institute of Technology, Roorkee is briefly discussed and compared with the available wind codes. From the study it can further be asserted that the information available related to staging or blocking under the mono-slope canopy roofs is limited. This paper is an attempt to put together the available information in different wind codes/standards and the research works carried out by different researchers, along with shedding some light on the future scopes of research on mono-slope canopy roofs.

• Journal of Mushroom
• /
• v.12 no.3
• /
• pp.171-180
• /
• 2014

The primary objective of the present study is the characterization of the hybrids of monokaryon- monokaryon (mono-mono) crosses in mushroom breeding. We employed this technique for developing superior strains from Pleurotus species strains with 85 mono-mono intraspecific hybrids of 7 combinations between six Pleurotus ostreatus strains and one Pleurotus florida strain. In this study, the results of analysis on hybridization rate, nuclear DNA patterns, and colors and yields of fruit-bodies, are presented as follows. The crossability between mono-mono crossing ranges between 50 and 93.75%. The results of the analysis on the nuclear DNA patterns of 85 hybrid strains of mono-mono crosses share the nuclei of both parents, but their genetic similarities were predominated by either parent. The hybrid strain between P. florida and P. ostreatus showed patterns more similar to P. florida, while the hybrid strain between P. ostreatus and P. ostreatus either had patterns predominated by either parent strain. The fruiting body colors of the mono-mono crosses mostly had combined colors of both parents but showed the tendency of being more similar to that of either parent. 82% of the hybrid strain indicated similar fruiting body yields compared to both parent strains, while 0% was higher and 18% were lower than both parents. The present study was able to find out and suggest superior hybrid trains by identifying the nuclear DNA patterns of hybrids between Pleurotus species as well as the characteristics of their fruiting bodies. This study expects that the advantages of the mono-mono crossing are needs to be fully utilized in mushroom breeding and it is better to develop superior strains of Pleurotus species strains together with the mono-mono crossing.

• Journal of Korea Multimedia Society
• /
• v.23 no.10
• /
• pp.1286-1295
• /
• 2020

It has been increasingly difficult to predict the amounts of Acer mono sap to be collected due to droughts and cold waves caused by recent climate changes with few studies conducted on the prediction of its collection volume. This study thus set out to propose a Big Data prediction system based on meteorological information for the collection of Acer mono sap. The proposed system would analyze collected data and provide managers with a statistical chart of prediction values regarding climate factors to affect the amounts of Acer mono sap to be collected, thus enabling efficient work. It was designed based on Hadoop for data collection, treatment and analysis. The study also analyzed and proposed an optimal prediction model for climate conditions to influence the volume of Acer mono sap to be collected by applying a multiple regression analysis model based on Hadoop and Mahout.

• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.25-30
• /
• 2014

This paper deals with a numerical study on the deformation of a mono tendon anchor head. The anchor head is used to introduce the compression to concrete, and consists of wedges and a head. All kinematics, material and contact nonlinearity are included in the precise analysis of a mono tendon anchor head. A numerical study on a mono tendon anchor head is performed to investigate effects of friction and eccentricity of load by ABAQUS. From the numerical results, it is verified that the deformation of a mono tendon anchor head is affected by characteristics of materials, boundary condition between wedge and anchor head, eccentricity of load, etc.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.10a
• /
• pp.108-109
• /
• 2004

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.11-16
• /
• 1972

During the period from 1966 to 1968, total catches of Spanish mackerel averaged 6,000 to 7,000M/T per annual in Korea, and approximately 70 per cent of this amount was captured by drift nets. In an effort to improve the efficiency of drift nets, some experiments were conducted in 1969 to investigate the selectivity of material and mesh sizes. Seven different mesh sizes (80,85,95,100,105,110 and 115 mm) of both multi- and mono-filament netting were used, and the following results were obtained : 1, The body weight of Spanish mackerel taken with the seven different mesh sizes ranges from 0.5kg to 2.9kg, and the mode of body weight consists of three groups, 1kg ($21%$), 1.3kg($15\%$) and 1.5kg($19\%$). 2. For multi-filament net, 80 to 105mm mesh sizes were suitable to catch those three groups, and a little smalter than these for mono-filament net. 3. For Spanish mackerel only, the mono-filament material proved to have 1.5 times better selectivity than multi-filament : however, the latter proved superior for miscellaneous fish species due to its different size and shape. 4. Multi-filament net showed better selectivity for smaller species than mono-filament. (and mono-filament in general indicated opposite phenomenon.)

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.60-65
• /
• 1997

Solvent extraction of alkali metal and alkaline earth metal cations by mono-crown ether(benzo-15-crown-5) and bis-(crown ether)s(ethylenediamine bis(4'-formyl benzo-15-crown-5)) containing benzo-15-crown-5 moieties were investigated with water-chloroform system at $25^{\circ}C$. The order of the extraction equilibrium constants($K_e$) and the complexation constants($K_c$) for the alkali metal and alkaline earth metal cations with mono-crown ether and bis-(crown ether)s were Ca(II)>Na(I)>Sr(II)>K(I)>Mg(II)>Rb(I) and Sr(II)>Ca(II)>K(I)>Rb(I)>Mg(II)>Na(I) respectively. These results were explained in terms of the size effect of metal cation and electron density effect. Also, the bis-(crown ether)s was found to extract metal cations more effectively than the corresponding mono-crown ether.