• 태양에너지
• /
• 제17권3호
• /
• pp.67-73
• /
• 1997

공기는 열전도 계수가 낮으므로 밀폐공간 내에서 적당한 형태를 형성하여 자연대류 열전달을 촉진 시키다면 태양열 집열기로서 건물 난방에 이용할 수 있고, 또 자연대류가 일어나지 않도록 유동을 억제 시킨다면 매우 훌륭한 단열재로 사용할 수 있다. 따라서, 본 연구에서는 건물벽 구조에 따라 내 외벽 사이에 단순 사각 밀폐공간을 형성하여 외벽의 가열부와 내벽의 방열부의 위치를 변화시켜 가며 수치해석을 수행하여 최대 난방 및 단열효과를 얻을 수 있는 새로운 대체 건물벽 개발에 관한 기초 설계 자료를 제시하고자 한다. 연구 결과 부력에 의한 driving force를 얻기 위해서는 방열부가 가열부보다 항상 위쪽에 위치하고 크기는 전체 높이의 1/2 이하일 때 열전달이 촉진됨을 알았다.

• 한국화재소방학회논문지
• /
• 제11권4호
• /
• pp.3-14
• /
• 1997

The smoke filling process for the atrium space containing a fire source is simulated using two types of deterministic fire model : Zone model and Field model. The zone model used is the CFAST(version 1.6) model developed at the Building and Fire Research Laboratories, NIST in the USA. The field model is a self-developed frie field model based on Computational Fluid Dynamic (CFD) theories. This article is focused on finding out the smoke movement and temperature distribution in atrium space which is cubic in shape. For solving the liked set of velocity and pressure equation, the PISO algorithm, which strengthened the velocity-pressure coupling, was used. Since PISO algorithm is a time-marching procedure, computing time si very fast. A computational procedure for predicting velocity and temperature distribution in fire-induced flow is based on the solution, in finite volume method and non-staggered grid system, of 3-dimensional equations for the conservation of mass, momentum, energy, species and so forth. The fire model i.e Zone model and Field model predicted similar results for clear heights and the smoke layer temperature.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.93-101
• /
• 1986

정지수역(靜止水域)에서 연직상향(鉛直上向)으로 방류(放流)되는 평면부력(平面浮力)?의 거동을 연속방정식(連續方程式), 운동량수송식(運動量輸送式) 및 추적물(追跡物) 수송식(輸送式)에 의하여 수치적(數値的)으로 해석한다. 이 해석은 유함수(流凾數)와 과수송식(過輸送式)을 도입하고 Prandtl 난류모형(亂流模型)을 이용하였다. 방류밀도(放流密度) Froude 수(數)가 4~32인인 부력(浮力)?의 발달된 흐름영역(領域)에서 구한 ?중심선의 속도(速度)와 온도변화(溫度變化), ?주변수역(周邊水域)의 온도분포(溫度分布)와 흐름양상은 기존자료와 잘 맞음을 확인할 수 있다. 적분형해석(積分型解析)에 필요한 퍼짐율과 확산비(擴散比)가 방류밀도(放流密度) Froude 수(數)와 방류구(放流口)로부터의 거리의 함수로 유도된다.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.467-475
• /
• 2015

In this paper, the FREECAD 0.14 was used for modeling conventional Selfie-stick and the newly proposed Selfie-stick design. The purpose of this paper is to demonstrate the utility of FREECAD 0.14, which is open-source and still in development for further use. After modeling the conventional Selfie-stick, CatiyaV5 was used to assemble FREECAD 0.14 drawn elements. Main advance in newly designed Selfie-stick is the portability. To improve portability of the Selfie-stick, folding mechanism was adopted from folding LED stands. Several mechanisms were adopted to improve user convenience as well. Ansys 14.0 was used for structural analyses of conventional Selfie-stick model and the newly designed model as well. Several simplifications for the models were needed to process the analyses. When analyzing the newly designed model various materials were used one by one to find compatible composition. Using Aluminum alloys for the stick and the hand grip was found to be compatible. FREECAD was useful for suggestion of the newly designed model but not so much useful to design an actual product. Various efforts would make FREECAD the best choice for industrial use for free as it is named.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.150-161
• /
• 1996

본논문에서는 파중에서의 다수의 3차원 임의형상 부체에 의해 지지된 초대형 해양구조물에 작용하는 정상표류력 해석법을 제시한다. 3차원 특이점 분포법, 파의 상호간섭이론, 운동량 이론에 의한 Far field법과 3차원 골조구조를 다루기 위한 유한요소법을 결합하여 이론을 정식화하였으며, 수치계산 결과를 Kagemoto[6]에 의한 33(3행11렬)개의 footing형 축대칭 부체에 의해 지지된 해양구조물에 작용하는 정상표류력의 실험치 및 계산치와 서로 비교 검토함으로써 본 해석법의 타당성을 검정하였다.

• 동아시아경상학회지
• /
• 제2권1호
• /
• pp.1-6
• /
• 2014

This research was about understanding challenges in managing a business start up. University of Kigali was used as a case study. It is domiciled in Rwanda. It was chosen because it is a recent university establishment and it provided a good source of information for this research. The issue that triggered this study was to understand the virtue of having clear separation of duties in new business start-ups. The findings from this study reveal that 100 percent of the respondents believe that clear separation of roles and clear communication between management, shareholders and Board of directors is vital for new businesses. From the Literature review, it was clear that a firm in its infancy has a lot of risks and it would not be a bad idea for the start for shareholders and Board of directors to give a helping hand in the day to day running of the business until its stabilization. Employees need to know the vision and mission of the business start-up and again, the managing director of a firm needs to work closely with the chairman Board of directors for effective driving of the firm into the right direction. The momentum in growth of University of Kigali is due to respect of the pillar of separation of duties in its hierarchical structure and for allowing a decentralized structure type of management for flourish.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.68-76
• /
• 2009

The sloshing tank causes the instability of the fluid flows and the fluctuation of the impact pressure by the liquid on the tank. These flow characteristics inside the sloshing tank can generate the uncomfortable sloshing noise. In the present study, a numerical analysis for the reduction of a fuel tank sloshing noise was performed. To simulate the flow characteristics in a sloshing tank with partially filled liquid, a VOF method was used for interfacial flows by applying a momentum source term for the sloshing motion in a non-inertial reference frame. This numerical method was verified by comparing its results with the available experimental data. For the reduction of the sloshing noise, the horizontal and vertical baffles and porous media inside a sloshing tank were considered and numerically analyzed in the present study. For various installations of these baffles and porous media, the characteristics of the liquid behavior in the sloshing tank were obtained along with the impact pressure on the wall and the height of the free surface along the wall. These basic results can be used for the design of the actual vehicular fuel tank with the reduced sloshing noise.

• Advances in Energy Research
• /
• 제5권3호
• /
• pp.255-275
• /
• 2017

The advantages of using natural circulation (NC) as a cooling system, has prompted the worldwide development to investigate this phenomenon more than before. The interesting application of the NC in low power experimental facilities and research reactors, highlights the obligation of study in these laminar flows. The inherent oscillations of NC between hot source and cold sink in low Grashof numbers necessitates stability analysis of cooling flow with experimental or numerical schemes. For this type of analysis, numerical methods could be implemented to desired mass, momentum and energy equations as an efficient instrument for predicting the behavior of the flow field. In this work, using the explicit, implicit and Crank-Nicolson methods, the fluid flow parameters in a natural circulation experimental test loop are obtained and the sensitivity of solving approaches are discussed. In this way, at first, the steady state and transient results from explicit are obtained and compared with experimental data. The implicit and crank-Nicolson scheme is investigated in next steps and in subsequent this research is focused on the numerical aspects of instability prediction for these schemes. In the following, the assessment of the flow behavior with coarse and fine mesh sizes and time-steps has been reported and the numerical schemes convergence are compared. For more detail research, the natural circulation of fluid was modeled by ANSYS-CFX software and results for the experimental loop are shown. Finally, the stability map for rectangular closed loop was obtained with employing the Nyquist criterion.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.35-43
• /
• 1992

Handling the emergency problems such as Chemobyl accident require real time prediction of pollutants dispersion. One-point real time sounding at pollutant source and simple model including turbulent-radiation process are very important to predict dispersion at real time. The stability categories obtained by one-dimensional numerical model (including PBL dynamics and radiative process) are good agreement with observational data (Golder, 1972). Therefore, the meteorological parameters (thermal, moisture and momentum fluxes; sensible and latent heat; Monin-Obukhov length and bulk Richardson number; vertical diffusion coefficient and TKE; mixing height) calculated by this model will be useful to understand the structure of stable boundary layer and to handling the emergency problems such as dangerous gasses accident. Especially, this simple model has strong merit for practical dispersion models which require turbulence process but does not takes long time to real predictions. According to the results of this model, the urban area has stronger vertical dispersion and weaker horizontal dispersion than rural area during daytime in summer season. The maximum stability class of urban area and rural area are "A" and "B" at 14 LST, respectively. After 20 LST, both urban and rural area have weak vertical dispersion, but they have strong horizontal dispersion. Generally, the urban area have larger radius of horizontal dispersion than rural area. Considering the resolution and time consuming problems of three dimensional grid model, one-dimensional model with one-point real sounding have strong merit for practical dispersion model.al dispersion model.

• 항공우주기술
• /
• 제7권1호
• /
• pp.136-141
• /
• 2008

원통형 초음속 디퓨저를 사용하면 추진기관에서 발생하는 고온 연소가스의 모맨텀을 이용하여 비교적 간단하게 안정된 고고도 환경을 모사할 수 있다. 디퓨저를 이용한 고공모사 시험에서 추진기관의 연소시간이 긴 경우, 고온의 연소가스가 디퓨저 내 벽면에 직접 탈기 때문에 반복적인 사용을 위해 이 부위에 대한 냉각대책이 필요하다. 디퓨저 내부로 분사되는 냉각수가 디퓨저 작동특성에 미치는 영향을 파악하고자 축소형 연소실험을 수행하였으며, 본 논문은 실험방법과 그 결과에 대해 기술하고 있다. 고체 추진제를 연료로 하는 가스발생기를 이용하여 추진기관을 모사하였으며, 일반 수돗물을 냉각제로 사용하였다.