• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.209-219
• /
• 1995

As a new algorithm for RC tree delay estimation, we propose a $\tau$-model of the driver and a moment propagation method. The $\tau$-model represents the driver as a Thevenin equivalent circuit which has a one-time-constant voltage source and a linear resistor. The new driver model estimates the input voltage waveform applied to the RC more accurately than the k-factor model or the 2-piece waveform model. Compared with Elmore method, which is a lst-order approximation, the moment propagation method, which uses $\pi$-model loads to calculate the moments of the voltage waveform on each node of RC trees, gives more accurate results by performing higher-order approximations with the same simple tree walking algorithm. In addition, for the instability problem which is common to all the approximation methods using the moment matching technique, we propose a heuristic method which guarantees a stable and accureate 2nd order approximation. The proposed driver model and the moment propagation method give an accureacy close to SPICE results and more than 1000 times speedup over circuit level simulations for RC trees and FPGA interconnects in which the interconnect delay is dominant.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.214-221
• /
• 2001

This paper describes the design of 3-component force/moment sensor with the force and moment ratio of wide range. It can measure the x-direction force Fx, y-direction force Fy and z-direction moment Mz simultaneously. In order to accurately measure forces and moment using 3-component force/moment sensor, it should get suitable force and moment ratio(the ratio of force Fx=200 N and moment Mz=20 Nm is ten to one), and small interference error. In this paper, in order to design the 3-component force/moment sensor with the force and moment ratio of wide range, the procedures are performed as follow : 1) the derivation of the equations to predict the bending strains on the surfaces of the plate-beams under the force or the moments, 2) the determination of the size of the sensing elements of the force/moment sensor by using the derived equations, 3) the Finite Element Method(FEM) analysis and the characteristic test for confirming the strains from the theory analysis, 4) the selection of the attachment locations of the strain gages of each sensor, 5) the analysis of the rated strain and the interference error at the attachment location of strain gages. It reveals that the rated strains calculated from the derived equations make a good agreement with the results from the Finite Element Method analysis and the characteristic test.

• Communications for Statistical Applications and Methods
• /
• 제16권1호
• /
• pp.137-141
• /
• 2009

We study on selecting the kernel weighting function in smoothing moment conditions for dependent processes. For hypothesis testing in Generalized Method of Moments or Generalized Empirical Likelihood context, we find that smoothing moment conditions by Bartlett kernel delivers smallest size distortions based on empirical Edgeworth expansions of the long-run variance estimator.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.146-152
• /
• 2002

The steel shows plastic deformation after the yield point exceeds. Because of overloads, the plastic deformation occurs at the interior support of a continuous bridge. The plastic deformation is concentrated at the interior support, and the permanence deformation at the interior support remains after loads pass. Because local yielding causes the positive moment at the interior support, it is called "auto moment". Auto moment redistributes the elastic moment. Because of redistribution, auto moment decreases the negative moment at the interior support of a continuous bridge. In this paper, the moment-rotation curve from Schalling is used. The Plastic rotation is computed by using Beam-line method, and auto moment is calculated based on the experiment curve. The design example is presented using limit state criterion.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.711-720
• /
• 2006

FCM 교량 상부구조의 거동은 콘크리트의 크리프와 건조수축 등에 의해 시간 의존적 거동을 나타내며, 이에 의해 하부구조 즉, 교각에는 시간에 따른 추가의 과도한 모멘트가 발생할 수 있다. 본 연구에서는 FCM 공법으로 시공되는 콘크리트 교량의 크리프와 건조수축에 의한 교각의 모멘트를 감소시킬 수 있는 기법을 제안하였다. 제안 기법은 교량의 체계적인 시간의존적 거동 해석과 교량 시공중의 제어하중 재하로 이루어진다. 제어하중의 크기 및 교각 유연도에 따른 교각의 거동 분석을 수행하였다. 교각 유연도에 따른 수치해석 결과는 교각의 유연도가 작을수록 시간에 따른 교각 모멘트 값은 증가하여 설계시 불리한 측면을 나타내고 있다. 제어하중을 도입하지 않은 경우에 비해 제어하중을 도입한 경우의 모멘트는 감소하고 있다. 또한, 실제 교량에 대한 수치해석 분석을 통하여 제안기법의 효용성을 제시하였다. 따라서, FCM 공법으로 시공되는 교량에서, 유연도가 작은 교각의 시간에 따른 모멘트 변화를 효율적으로 제어할 수 있다고 판단된다.

• 한국지진공학회논문집
• /
• 제13권5호
• /
• pp.51-60
• /
• 2009

안전한 내진설계를 위해서는 각 부재에 요구되는 소성변형 요구량을 정확히 예측하여야 한다. 본 연구에서는 등가정적내진설계에 쉽게 활용할 수 있도록, 복잡한 비선형해석 없이 탄성해석을 사용하여 모멘트골조 부재의 소성변형을 평가하는 방법을 개발하였다. 각 부재의 소성변형은 부재 강성과 탄성해석 결과로부터 직접 결정되는 층간변위비 요구량 및 모멘트 재분배 등의 설계 변수로부터 결정된다. 제안된 방법을 8층 2경간의 모멘트골조에 적용하고, 비선형해석을 통하여 제안된 방법의 정확성을 검증하였다. 검증결과, 제안된 방법은 비선형거동에 의한 층간변위비 요구량과 각 부재의 소성변형 요구량을 정확히 평가하였다. 제안된 방법은 부재연성설계와 같은 신축건물의 내진설계에 활용할 수 있을 뿐만 아니라 기존건물의 내진성능평가에도 활용될 수 있을 것으로 기대된다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1997년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.113-118
• /
• 1997

This paper proposes a object tracking method based on the local moments, or moment based on the local moments, or moment of some restricted area, in which the idea of the viewpoint and the visual filed corresponding to the local area of an image is introduced. Using local moment with the optimally controlled viewpoint and visual field, the target position and its breadth are estimated robustly. By two experiments, the validity of the proposed method is shown.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.28-34
• /
• 2012

In this study, the reliability-based design optimization of the airfoil was performed. PARSEC function was used to consider the uncertainty of the aerodynamic shape for the reliability-based shape optimization of airfoils. Among various reliability analysis methods, the moment method was used to compute the probability of failure of the aerodynamic performance. The accuracy of the reliability analysis was compared with other methods and it was found that the moment method predicts the probability of failure accurately. Deterministic and reliability-based optimizations were performed for the shape of the airfoil and it was demonstrated that reliability-based optimum assures the aerodynamic performances under uncertainties of the shape of the airfoil.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.345-353
• /
• 2002

A study of polydispersed aerosol dynamics by Electrostatic Precipitator (ESP) was carried out. The log-normal particle size distribution was assumed and moment method was considered. In order to apply moment method in Deutsch-Anderson equation, Cunningham slip correction factor and Cochet's charge equation were simplified for certain range of particle size. The three parameters, which explain the particle size distribution, such as total number concentration, geometric mean diameter, and geometric standard deviation were considered to derive the analytic solution. The obtained solution was compared with available numerical results (Bai et al., 1995). The comparison of the numerical and analytic results showed a good agreement.

• Structural Engineering and Mechanics
• /
• 제52권3호
• /
• pp.525-540
• /
• 2014

The Lyapunov exponent and moment Lyapunov exponents of Hill's equation with frequency and damping coefficient fluctuated by correlated wideband random processes are studied in this paper. The method of stochastic averaging, both the first-order and the second-order, is applied. The averaged $It\hat{o}$ differential equation governing the pth norm is established and the pth moment Lyapunov exponents and Lyapunov exponent are then obtained. This method is applied to the study of the almost-sure and the moment stability of the stationary solution of the thin simply supported beam subjected to time-varying axial compressions and damping which are small intensity correlated stochastic excitations. The validity of the approximate results is checked by the numerical Monte Carlo simulation method for this stochastic system.