• Applied Chemistry
• /
• v.15 no.2
• /
• pp.89-92
• /
• 2011

We synthesized ethylene-styrene copolymer using pyrazolato-type metallocene catalysts. We observed the effects of ethylene contents on the catalytic activity, yield molecular weight and molecular weight distribution. We could also confirm living polymerization behavior through the changes of the M_n and M_w/M_n according to the yield.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1991

Moleclar size distribution of three AC-20 asphalt cements were observed using high pressure - gel permeation chromatograph (HP-GPC). Bituminous concrete specimens were made using the asphalt cements and one aggre¬gate in laboratory to measure mechanical properties, tensile strength CIS) and resilient modulusCM,J. in dry and wet conditons. Results of mechanical property tests and profile of molecular size distribution of asphalt cements were analyzed to evaluate the relatonship of mechanical property with chromatogram. Regression analy¬sis showed a strong correlation between a mechanical property and sliced percent areas of chromatogram. Mathematical prediction models were developed based on the regression analysis. It was shown that characteris¬tics of asphalt cement chromatogram could be successfully used for estimation of selected mechanical property of asphalt concrete .

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1145-1157
• /
• 2003

The surface sediments inside Hallim Harbor, one of the major harbors of Jeju Island, were sampled three times (June, September and December, 2001) and analyzed for 16 polycyclic aromatic hydrocarbons (PAHs), recommended by US-EPA as priority pollutants, to assess their distribution levels and to suggest their possible origins. The concentrations of PAHs ranged from 19 to 496 ng/g on a dry weight basis with a mean value of 245 ng/g, and the levels were low to moderate in comparison with other areas in the world. Based on comparisons of individual and total PAH concentrations with effects-based and equilibrium partitioning-based on sediment quality guidelines, the potential for the biological effects were expected to be low. The sedimentary PAHs may be correlated with organic carbon and mud contents to some extent. From the examinations of the four PAH origin indices, such as LMW/HMW (low molecular weight 2-3 ring PAHs over high molecular weight 4-6 ring PAHs), phenanthrene/anthracene ratio, fluoranthene/pyrene ratio, chrysene/benzo〔a〕anthracene ratio, it can be concluded that the sediment PAH contaminations were ascribed to both pyrolytic and petrogenic origins.

• Journal of Information Display
• /
• v.4 no.2
• /
• pp.29-34
• /
• 2003

We have studied liquid crystal (LC) molecular alignment on rubbed and photoaligned surfaces. Particular attention was paid to the intermolecular liquid crystalline interaction. We will first show that uniform molecular orientation on a rubbed surface does not mean spatially uniform interaction between the surface and LC molecules. Rather LCs tend to align themselves through LC interaction. The existence of nonuniformity of rubbing was successfully visualized by double surface treatment. The importance of intermolecular LC interaction was also found in the orientation formation process in 5CB evaporated on rubbed and photoaligned surfaces. By simultaneously analyzing polarized UVNIS absorption and second-harmonic generation (SHG) using the maximum entropy method, we succeeded in obtaining the temporal variation of the orientational distribution functions in the film forming process. The distribution anisotropy and pretilt are found to be generated under the influence of intermolecular LC interaction.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.388-393
• /
• 2015

Low molecular weight species were extracted from PC and SAN by a solvent extraction method in order to investigate the effect of low molecular weight species on interfacial tension and affinity between PC and SAN. From the analysis of molecular weight distribution by the GPC, it was confirmed that the low molecular weight species were effectively eliminated by the solvent extraction. Interfacial tension measurements and morphological observation were carried out with the PC and SAN of which the low molecular weight species were extracted. Interfacial tension was increased and the infinity was decreased for the extracted PC and SAN pair. This result implied that the low molecular weight species play a role as a compatibilizer between two polymers. Among two polymers, low molecular weight SAN contributes more in the compatibilization. Thus, it is favorable to use SAN containing a larger amount of low molecular weight species in fabrication of PC/ABS blend.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9379-9383
• /
• 2014

Background: Pathologic complete response (pCR) is one of the most important target end-points of neoadjuvant chemotherapy (NACT) in patients with breast cancer (BC). In present study, we aimed to investigate the relationship between molecular subtypes and NACT in patients with BC. Materials and Methods: Using the Akdeniz University database, 106 patients who received NACT for operable breast cancer were retrospectively identified. Prognostic factors before and after NACT were assessed. According to the molecular subtypes, molecular shifting after NACT and tumoral and nodal response to NACT were analyzed. Results: The distribution of subtypes was: Luminal A, 28.3% (n=30); Luminal B, 31.1% (n=33); HER2-like, 24.5% (n=26); and basal like/triple negative (BL/TN), 16.0% (n=17). According to molecular subtypes, pCR rates in both breast and axillary were 0%, 21.4%, 36.4% and 27.3% for luminal A, luminal B, HER2-like and BL/TN, respectively (p=0.018). Molecular subtype shifting was mostly seen in luminal A type (28.6%) after the NACT. The pCR rate in breast and axillary was significantly higher in patients with HER2-like type BC. Conclusions: In patients with HER-2 like type BC, NACT may be offered in early stages. Additionally, due to molecular shifting, adjuvant treatment schedule should be reviewed again, especially in the luminal A group.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.97-97
• /
• 2003

For many animals the centrosome consists of a pair of centrioles and surrounding pericentriolar materials (PCMs). PCMs have been known to play roles during cell division. It is known that centrioles are necessary to assemble centrosomal components. However, many types of oocytes undergo meiosis without centrioles. It is known that in nonmurine mammalian species, the sperm introduces an intact proximal centriole unlike sea urchin where two centrioles are introduced. In case of mouse sperm, the presence of centrosome is not clear In this study, a monoclonal antibody was developed to investigate centrosome during mouse germ cell and early embryo development. Results of immunostaining and Western blotting in CHO cells suggest that the monoclonal antibody recognizes a nuclear and centrosomal protein, thus called NCP. The NCP monoclonal antibody was used to screen a cDNA expression library prepared from 12.5 mouse brain to isolate NCP gene. Nucleotide size of NCP gene obtained from immunoscreening was about 5.5kb. It is determined that the NCP may be closely related with pericentriolar material -1 gene (Pcm-1) from the result of sequencing analysis. The molecular weight, 66kDa, calculated by known DNA sequence in database is consistent with that of detected from Western blotting using CHO cell lysates. Therefore, it is assumed that NCP may be alternative splicing form of Pcm-1 of which molecular weight is 228kDa. In mouse oocytes, NCP was distributed in nucleus as in CHO cells. It was shown that the NCP was localized around neck region, probably the centrosome in mouse neck region. Interestingly, dramatic change in distribution of NCP was also shown in male germ cell development. Finally, we observed the cellular distribution of NCP during early embryo development. NCP was detected in nucleus as well as centrosome foci. It is suggested that the centrioles reassembly we occurring in blastocysts and then affects the distribution of NCP.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.432-437
• /
• 1999

Pyrolysis of polyethylene was carried out in the stainless steel reactor of internal volume of $10cm^3$. Pyrolysis reactions were performed at temperature $390{\sim}450^{\circ}C$ and the pyrolysis products were collected separately as reaction products and gas products. The molecular weight distributions(MWDs) of each product were determined by HPLC-GPC and GC analysis. Distribution balance equation for MWDs of random and specific products were proposed to account for initiation-termination and propagation-depropagation, such as hydrogen abstraction, chain cleavage, coupling of polymer and radical. A separate chain-end scission process produces low molecular weight noncondensable gases(C1 through C5) of average molecular weight 38. Activation energies of the random-chain scission and chain-end scission rate parameters, respectively, were determined to be 35, 17 kcal/mole.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2004

This research was carried out to investigate the component isolation method from liquefied waste paper. and isolated component was analyzed by molecular weight distribution with gel chromatography and nitrobenzene-oxidation analysis. In the aspect of liquefaction ratio, wet defibration fiber are better than dry defibration fiber because of wet defiberation fiber was easy to access of chemical solution. The optimal liquefaction condition of waste paper was treated at 190℃ for 60 min(cresol 2 ㎖, water 4 ㎖, phosphoric acid 0.5 ㎖ based on waste paper 1 g). In the liquefied waste paper, lignin and carbohydrate were separated with two interfacial layer(cresol layer, water layer). In the chemical analysis of isolated lignin, molecular weight distribution of isolated lignin was below 1,000.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.