• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.24-41
• /
• 2014

Since the celadons excavated from the Son-gok 2-ri 4th kiln site are located in the Beopcheon temple site and at close range, the similarity to the celadons excavated from the Beopcheon temple site is being raised. Thus, this study examined the correlation using a natural-scientific method. In this study, historical ceramic properties of total 19 celadons were examined and they were scientifically analyzed. First of all, according to the scientific analysis, chemical compositions of celadon clay showed a dispersed distribution at RO2 3.79-7.77mole and RO+R2O 0.33-0.49mole. When the microstructure was analyzed, most celadons excavated from the Beopcheon temple site, Wonju, which are estimated to be used in real life, had a favorable state, and some celadons from the Son-gok 2-ri 4th kiln site were found not to be glazed and sintered properly. When analyzing body crystalline phases of the celadons using the XRD method, quartz and mullite were extracted from all of the samples. And corundum was extracted from sg4 sample. Though firing temperature of each sample was different, they were mostly fired to temperatures between 1150 and $1200^{\circ}C$ and some of them experienced a low temperature of $1100^{\circ}C$ or a high temperature above $1200^{\circ}C$. Various chemical compositions and producing techniques were observed in the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site and it is hard to assure that the Son-gok 2-ri 4th kiln site was the production kiln site of the celadons used in the Beopcheon temple site. But according to the analysis of rare earth elements, some of the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site displayed a distribution pattern with certain regularity and this implies there is a possibility that the raw materials used in producing the ceramics might have come from the same origin. From the perspective of ceramic history, the celadons excavated from the Beopcheon temple site and Son-gok 2-ri 4th kiln site were produced using the same molding and sintering technique. Also, it is estimated that they were produced in the 12th or 13th century, judging from the overall shapes and patterns of the celadons.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.4
• /
• pp.10-20
• /
• 2014

This study was carried out for the purpose of analysis correlations between street furniture design elements and preference of street furniture. This research analyzed the various street furniture set on Ilsan new town street, which are rest, hygiene, light, information, sale, traffic, and landscape. This study has processed by analysing street furniture literature investigation and consideration of theory. First, for analysed effect of street furniture element, has been appear as element 'relaxation facilities', 'information facilities', landscape facilities' mainly effect on street. Specially, 'rest', 'landscape', 'information' in order had a major influence on scenery. Each kind of 'chair elements' in rest facilities, 'sign board' in information facilities, 'sculpture', 'fountain' in 'landscape facilities' has analyzed as the main elements in the landscape affinity property affecting factor. Second, the results of analyzed landscape elements (shape, colour, texture, scale) affect to the affinity of street furniture. chair which are included in rest facilities affect "texture", "form", "scale", "color" in the order of preference of the molding design elements that influence landscape. Particularly, showed statistically significant on 'colour' element affecting the landscape preference than the other three elements. It means as the chair element which is rest facilities mainly affect on preferences, rather than texture, form, scale, colour. Monument in the landscape associated with a preference 'colour', 'shape', 'texture' 'scale' and appears to be in order of impact so we could get the consequence like chair and rest facilities show different aspects of the respectively. It means, visual element which are colour and shape significantly impact on landscape preferences. Third, information facilities such as signboard formative elements of landscape design preferences and correlation with negative showed that the correlation. That mean if the sign board is very negative influence on landscape preferences and the correlations of the design formative elements appear in order of 'scale', 'colour', 'texture'. It also means that the 'scale' namely the size of advertising material and colour are adversely affected in terms of landscape. As these results, when design street furniture as the street scenery, facilities according to the kind of the shape element and need to focus on relative shape element according to the kind of facilities difference. Finally, so far as to clarify the street furniture, mainly 'function' and 'system' classification shows undesirable in outdoor scape. Thus, performed studies in relationship with landscape, classify 'kind of facilities' is more desirable than 'system'.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.505-516
• /
• 2009

The effects of wood species, particle size of wood flours and coupling treatment on the mechanical properties of wood plastic composites (WPC) are investigated in this study. Chemical components of wood flour from 3 different wood species were analyzed by the chemical analysis. Wood flours of 40~60 mesh and 80~100 mesh were manufactured from Larix (Larix kaempferi Lamb.), Quercus (Quercus accutisima Carr.), and Maackia (Maackia amuresis Rupr. et Maxim). The wood flours were reinforced into polypropylene (PP) by melt compounding and injection molding, then tensile, flexural, and impact strength properties were analyzed. The order of alpha-cellulose content in wood is Quercus (43.6%), Maackia (41.3%) and Larix (36.2%). The order of lignin content in wood is Larix (31.6%), Maackia (24.7%), and Quercus accutisima (24.4%). The content of extractives in wood is in the order of Larix (8.5%), Maackia (4.4%), and Quercus accutisima (3.9%). As the content of alpha-cellulose increases and the lignin and extractives decreases, tensile and flexural strengths of the WPC increase. At the same loading level of wood flours, the smaller particle size (80~100 mesh) of wood flours showed highly improved tensile and flexural strengths, compared to the larger one (40~60 mesh). The impact strength of the WPC was not significantly affected by the wood species, but the wood flours of larger particle size showed better impact strengths. The addition of maleated polypropylene (MAPP) provided the highly improved tensile, flexural and impact strengths. Morphological analysis shows improved interfacial bonding with MAPP treatment for the composites.

• Clean Technology
• /
• v.30 no.2
• /
• pp.134-144
• /
• 2024

In this study, the mechanical stability of red mud was improved for its commercial use as a catalyst to effectively decompose HFC-134a, one of the seven major greenhouse gases. Red mud is an industrial waste discharged from aluminum production, but it can be used for the decomposition of HFC-134a. Red mud can be manufactured into a catalyst via the crushing-preparative-compression molding-firing process, and it is possible to improve the catalyst performance and secure mechanical stability through calcination. In order to determine the optimal heat treatment conditions, pellet-shaped compressed red mud samples were calcined at 300, 600, 800 ℃ using a muffle furnace for 5 hours. The mechanical stability was confirmed by the weight loss rate before and after ultra-sonication after the catalyst was immersed in distilled water. The catalyst calcined at 800 ℃ (RM 800) was found to have the best mechanical stability as well as the most catalytic activity. The catalyst performance and durability tests that were performed for 100 hours using the RM 800 catalyst showed thatmore than 99% of 1 mol% HFC-134a was degraded at 650 ℃, and no degradation in catalytic activity was observed. XRD analysis showed tri-calcium aluminate and gehlenite crystalline phases, which enhance mechanical strength and catalytic activity due to the interaction of Ca, Si, and Al after heat treatment at 800 ℃. SEM/EDS analysis of the durability tested catalysts showed no losses in active substances or shape changes due to HFC-134a abasement. Through this research, it is expected that red mud can be commercialized as a catalyst for waste refrigerant treatment due to its high economic feasibility, high decomposition efficiency and mechanical stability.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.231-237
• /
• 1999

It is very distinctive that sigumjang meju was produced with smoking after molding. Every shapes of traditional sigumjang meju gathered from Kyeongsangbukdo were doughnut types. Fermentation time were $60{\sim}90$ days. Aerobic bacteria were $6.8{\times}10^7\;cfu/g$, and anaerobic bacteria, yeasts, molds count $3.2{\times}10^6\;cfu/g,\;1.0{\times}10^6\;cfu/g\;and\;4.0{\times}10^6\;cfu/g$, respectively. Analysis showed: moisture content, $10.5{\pm}2.6%$; fat content, $2.9{\pm}1.1%$; protein content, $8.3{\pm}0.7%$; ash content, $3.8{\pm}0.7%$; pH, $6.0{\pm}0.5$; L-value, $54.5{\pm}4.7$; a-value, $+3.3{\pm}0.7$; and b-value, $+10.7{\pm}2.0$. K content was the most in quantity among the minerals in sigumjang meju. Maltose was most abundant component among the tested sugars followed by mannitol. Total content of amino acid was $1524.9{\pm}1295.3\;mg%$. Proline was the most abundant component among the amino acids. The ratio of essential amino acid was $30.0{\pm}12.9%$. The principal fatty acids were 18:2, 18:1 and 16:0. Saturated fatty acid and mono unsaturated fatty acid were $23.2{\pm}1.9%\;and\;23.5{\pm}5.2%$, respectively. The PUFA/SFA was $2.3{\pm,}0.3$ which higher than 1.

• Journal of the Korean Society of Radiology
• /
• v.9 no.7
• /
• pp.529-533
• /
• 2015

VCUG(Voiding Cystourethrography) study is being performed to check urinary reflex symptom from bladder to ureter or kidney in the method of filling the bladder with radiation opaque contrast agent. However, VCUG study have been performed impersonally, patients have to be naked and open their legs and then void. This method is so impersonal that it is immediately needed to improve the way of testing and crete new aid. Therefore, this study through producing underwear for VCUG, analysis and compares the test time of VCUG, patient radiation dose and patient satisfaction. The target of this study was 79 Male and Female patients who visited genitourinary clinic of PNUYH for their VCUG tests AXIUM Iconos R200(Siemens Medical System : Germany) and self-produced plastic underwears made by vinyl and plasic molding machine were used. The 79 patient were divided into two groups : experiment of patient and comparison group of we patient (using aid) in order to compare, testing time, DAP (dose area product) and patient satisfaction. There was time reduction, from 35.3min of comparison group to 27.8min experimentation group by 7.5min decrease. And comparison group of $4566.6{\mu}Gym^2$(DAP) decreased experimental group (using aid) of $3411.9{\mu}Gym^2$ by $1154.7{\mu}Gym^2$. In the case of patients satisfaction study, anxiety had a drop by 3.45 of comparison group to 2.51 experimentation group by 0.94 decrease. in experimental group. And shame had a drop by 4.02 of comparison group to 3.08 experimentation group by 0.94 increase. in experimental group. Difference of the smooth voiding had a drop by 1.90 of comparison group to 2.84 experimentation group by 0.94 increase. in experimental group. In addition satisfaction had a rise by 1.19 in experimental group. There were also other opinions of uncomfortableness on it and troublesome to wear. VCUG is one of the sensitive care required test. Therefore staff and the aid can give patients such comfortable and the aid can consentive on voiding. As a result test time and DAP can be reduced. It is needed to make testing at more comfortable for patients.