• Composites Research
• /
• 제31권1호
• /
• pp.8-11
• /
• 2018

섬유강화 복합재료 제조 방법 중 sheet molding compound(SMC)는 자동차에 적용 가능성이 가장 높은 소재이다. 본 연구에서는 저비중 필러인 유리버블과 강화재인 유리섬유를 사용하여 물성이 저하되지 않으면서 낮은 비중을 나타내는 SMC의 제조를 위한 최적의 배합비에 대해 연구하였다. SMC 내부에 유리섬유의 혼입양이 증가할수록 강도가 향상하였고, 유리버블의 혼입양이 증가할수록 비중이 낮아졌다. 최적의 배합에서는 비중이 낮아지면서 물성이 향상되는 시너지 효과가 나타남을 발견하였다. 이러한 시너지 효과는 유리버블의 크랙 전파의 분산효과와 유리버블의 혼입에 따른 섬유와 매트릭스의 결합력의 향상에 기인한 것임을 내부구조 분석을 통해 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제15권2호
• /
• pp.171-178
• /
• 2010

본 연구는 중소기업의 정보화를 추진함에 있어, 정보화 중에서도 중단기적인 도입 성과를 낼 수 있는 생산설비정보화 구축을 위하여, 성형제조업 분야의 생산실적 수집에 대한 표준 모델을 연구 개발한다. 성형제조업 생산설비정보화 표준화를 위한 개발방법론은 기 연구 개발된 생산설비정보화 개발 방법론(PSDM)을 적용하며, 표준화 모델은 생산관리 프로세스 중 메인 프로세스인 원자재수급 관리와 생산량 집계 2개의 프로세스를 표준화 시키고 표준 모듈을 개발한다. 본 연구로 생산설비정보화를 구축하고자 하는 성형제조업 중소기업 및 관련 전문 IT업체 들이 표준화된 모듈을 적용하여 시스템을 보다 효과적으로 구축 할 수 있으며, 시스템에 대한 구축 용이성과 신뢰성을 제공한다. 본 연구 결과를 적용함으로써 생산공정의 불합리한 요소제거, 생산제품 품질 향상, 생산비용절감이 가능하다.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.38-42
• /
• 2008

Recently, the demands of digital camera and miniature camera module for mobile-phone is increased significantly. Lenses which is the core component of optical products are made by the injection molding(plastic lens) or GMP(glass lens). Plastic lens is not enough to improve the resolution and performance of optic parts. Therefore, the requirement of glass lens is increased because it is possible to ensure the high performance and resolution. In this paper, the thermal stress analysis of 3 cavity GMP mold for molding glass lens was performed for estimating the thermal stress and amount of deformation. Finally, the modification plan based on the analysis results was deducted.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.64-69
• /
• 2012

This study looks at plastic mold design for robots and mold manufacture, which is an injection mold branch at The Korea-China-Japan University Grand Prize Contest. Product analysis and layout, molding analysis, and upper and lower core design are carried out to design molds in 2D and 3D. After the design of the cores, NC machining software is used for simulation before actual manufacture. Before the production of end-product, test injection is done to troubleshoot problems like bad dimensions, burr, cracks and stepped pulley.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.33-37
• /
• 2001

본 논문은 사출성형제품의 게이트 설계를 합리적으로 수행하기 위해 사출금형설계전문가의 축적된 지식과 경험을 발췌·정리하여 지식베이스를 작성하였으며, 설계에 필요한 제품의 형상정보를 제공하기 위해 총칭형상과 특징형상 개념을 이용하여 특징형상을 정의하였다. 또한 지식베이스를 통해 산출된 설계결과를 기하학적 모델러와의 인터페이스를 통해 3차원 형상으로 보여지도록 하였으며 최종 생성된 3차원 기하학적 형상정보는 CAE 모듈이나 CAPP 모듈에서의 후속작업을 위해 제공될 수 있도록 구축되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.121-124
• /
• 1995

This study is aimed at cutting down the cost, weight and improving process by replacing the traditional sintered piston of the shock absorber with engineering plastic piston by means of injection molding. To obtain the high mechanical properties, glass fiber material was selected adequately and forming analysis considering fiber orientation was made to remove the forming deficit fators and to construct the optimal runner system. In addition, structural analysis using commercial software MOLDFLOW was performed under near conditions in actual driving of automotive. The results from the internal pressure process test, oilproof test based on forming, structural and strength analysis shows that hydraulic close performance and damping force considering the out of roundness of shock absorber are relatively good.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.33-37
• /
• 2007

In recent, the demand of high-productivity injection mold increases because of the growth of international packaging market. The increase of productivity leads to the large-sized injection molding machine and peripheral devices. For solving this problem, the stack mold which is based on the existing machine and device is studied in advanced countries actively. In this study, as the preliminary research of stack mold development, the stack mold which has 2 Level ${\times}4$ Cavity is designed and manufactured. Besides, the motion and structural analysis are executed to verify the stability of developed stack mold.

• 소성∙가공
• /
• 제24권6호
• /
• pp.418-425
• /
• 2015

Based on eco-friendly advantages and the enhanced development in the chemical and physical characteristics, liquid silicone rubber (LSR) is widely used in producing precision parts in the automotive, medical, electronics, aeronautical and many other industries. In the current work, a thermoplastic-thermoset multi component injection molding (MCM) was developed for a waterproof automotive connector housing using PBT and LSR resins. Measurements of the rheological characteristics of PBT and LSR were made to improve the reliability of the numerical analysis for the multi component injection process. With the measured viscosity, pvT and curing data, numerical analysis of the multi cycle injection molding was conducted using simulation software (Sigma V5.0).

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.159-162
• /
• 2008

High pressure is involved during injection molding operation specially packing phase. Cracks in the mold are often occurred by high cavity pressure. In this study, structural analysis of mold has been performed using commercial softwares, Abaqus and Ansys, to investigate cause of crack in the injection mold. Structural analysis contains four cases: stress distribution according to the cavity pressure, stress concentration according to the boundary conditions, stress concentration for inter-locking design of mold, and stress concentration for distributed cavity pressure. Through this study it was observed that the locations of stress concentrations were coincident with locations of crack. Robust mold design is being required to withstand high cavity pressure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.297-300
• /
• 2008

High pressure is involved during injection molding operation specially packing phase. Cracks in the mold are often occurred by high cavity pressure. In this study, structural analysis of mold has been performed using commercial softwares, Abaqus and Ansys, to investigate cause of crack in the injection mold. Structural analysis contains four cases: stress distribution according to the cavity pressure, stress concentration according to the boundary conditions, stress concentration for inter-locking design of mold, and stress concentration for distributed cavity pressure. Through this study it was observed that the locations of stress concentrations were coincident with locations of crack. Robust mold design is being required to withstand high cavity pressure.