• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.715-716
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.717-718
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.350-353
• /
• 2001

Due to the widen demand of plastic part in automobiles, more accurate numerical simulation works are needed to find optimum molding process like filling fiber orientation pressure control. Therefore, C-mold software was applied for the simulation of injection molding process and cooling process in this research. The purpose of this study is developing a ball seat which made by injection process with PA66 resin and it is applied to the automobile suspension system. It must secure low friction, wear resistance and dimensional accuracy. Specially this study aims to get the quality stabilization of injection molded bass-seat parts.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.100-106
• /
• 2022

Topology optimization is applied for the optimal design of various products to ensure weight reduction and productivity improvement. Reducing the weight of the mold while maintaining its rigidity can ensure shortening of the production cycle, stabilization of the mold temperature, and reduction of mold material costs. In this study, a topology optimization technique was applied to the optimal design of the injection mold, and a topology-optimized model of the mold was obtained. First, the injection mold for the square specimens was modeled. Subsequently, a structural analysis was performed by implementing a load condition generated during the injection molding process. Topology optimization was performed based on the structural analysis results, and the models of the initial and topology-optimized designs were manufactured at 1/4 magnification using a 3D printer. Consequently, compared with the existing model, the weight of the topology-optimized model decreased by 9.8%, and the manufacturing time decreased by 7.61%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.346-349
• /
• 2001

Nowadays the amount of plastic products is increasing in modern industry. Plastic materials are continuously developed to satisfy the mechanical, physical, and chemical properties. The increasing application of plastic parts in automobile and aerospace industries is due to the fact that it can reduce the structural weight and can lessen the environmental contamination. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low cost and short production time. Through various analyses of resin flow and molding process for the conventional gate and cooling mechanism, a new type of mold was designed which had different gate location and cooling systems. Newly designed ball seat has an excellent performances, i.e. diminished weld-line, residual stress density, higher magnitude less crack propagation and smaller dimensional contractions effect.

• 한국주조공학회지
• /
• 제28권6호
• /
• pp.282-287
• /
• 2008

The effect of CaO mold on the formation of reaction layer was investigated. CaO mold was prepared by mixing of Colloidal silica($NALCO^{(R)}$ 1130) and an $ZrO_2$, CaO at room temperature. The dried at $20{\pm}3^{\circ}C$, 75% humidity for 12hrs. Sample was prepared from the Cp-Ti(grade-2) and melted by high frequence induction melting system in the vacuum condition. The react ion layer of Ti was confirmed by optical microscopy, microhardness(Hv) and X-ray diffraction. Thickness of reaction layer using the CaO stabilized ZrO2 was thinner than the CaO added ZrO2. And thickness of reaction layer were decreased with decreasing pH of slurry. CaO addition in the slurry could not controlled reaction between molten Ti and investment mold. On the other hand, the CaO chemical bonded ZrO2 by stabilization treatment could controlled reaction between molten Ti and investment mold.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.22-27
• /
• 2008

Forming of PET bottle was performed by injection-stretch blow molding. Blow molding is process of contacting the dies with air of materials by pressing. In this paper, the aim was to improve reliability of technical stabilization for the PET bottle that is last productive product and process technology which was able to do maximization by a preform performance enhancement of the uniform thickness that took temperature and a characteristic of materials. Preform design and dies manufacture were conducted using injection blow molding analysis results. Therefore thickness error of 5% for PET bottle can be obtained in this paper.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.267-275
• /
• 1997

Fabrication of high strength Mg-Li-Al alloys by squeeze casting was established by the stabilization of melt and mold temperatures, applied pressure and the refining method. The entrapment of inclusions during pouring was prevented using 30 ppi alumina foam filter. The as-cast microstructure consists of a mixture of ${\alpha}$ and ${\beta}$ phases including AILi and $MgLi_2$, Al particles, which are distributed in the ${\beta}$ matrix. The grain sizes of gravity and squeeze casting alloys were 288 ${\mu}m$ and 207 ${\mu}m$ respectively. The addition of Al in Mg-Li alloys promoted the formation of second phase particles, which were adjusted to optimize the properties of Mg-Li-Al alloys. The Mg-10wt%Li-5wt%Al alloy after heat treatment at $350^{\circ}C$ for 1 hour showed the maximum hardness value. This is due to the facts that the amounts of ${\alpha}$ and ${\beta}$ phases and their distributions are dependent upon the solution treatment temperature, and that the amounts of AILi and $MgLi_2Al$ particles are dependent upon the Al content.

• 보존과학회지
• /
• 제30권3호
• /
• pp.263-275
• /
• 2014

천마총(황남동 제 155호 고분)에서 출토된 철부(鐵釜)의 제작기법 및 보존처리에 대하여 연구하고자 하였다. 철부의 제작기법을 조사하기 위하여 유물 중 일부를 채취하여 마운팅 후 연마하고, etching을 실시하여 금속조직을 관찰하였고, 비금속개재물부분은 SEM-EDS로 분석을 실시하였다. 금속학적 조직검사와 SEM-EDS분석 결과 철 솥은 백주철 조직이 관찰되었고, 주조 후 상온에서 서서히 건조시킨 것으로 보이며, 취성을 개선하기 위해 별다른 열처리를 시도한 흔적은 보이지 않는다. 몸통 중심부의 폭3cm 두께 1.5cm 전이 확인됨에 따라서 가로식 거푸집을 활용한 이분제작기법을 사용하여 주조한 것으로 추정된다. 이처럼 백주철 조직과 가로식 거푸집을 활용한 제작기법은 비슷한 시기인 식리총과 황남대총에서 출토 된 철 솥에서도 나타나는 것으로, 당시 주조품의 생산기술이 동일하였음을 알 수 있었다. 보존처리는 크게 처리전조사, 이물질제거, 탈염처리, 강화처리, 접합 복원, 색맞춤의 순서로 진행하였으며, 처리과정 중 필요에 따라 세척 및 건조를 실시하였다. 강화처리는 유물의 크기로 인하여 진공함침에 어려움이 있었으므로, 저농도의 Paraloid NAD-10을 2-3차례 붓으로 도포하였고, 보존처리가 완료된 후 15wt.% Paraloid NAD-10용액으로 표면을 재강화하였다. 파손부위의 복원은 섬유강화플라스틱 수지(POLYCOAT FH-245,몰드 적층용)를 사용하여 파손 부위와 유사한 형태의 모형을 만든 후 접합하여 복원하였다. 이번 연구를 통하여 철제유물의 보존처리뿐만 아니라 5-6세기 주조 철솥의 제작기법에 대한 자료를 축적함으로 향후 보다 나은 연구를 위한 발판으로 활용되었으면 한다.