• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.315-318
• /
• 2007

This study is designed to review the current status of the National Technical Qualification(NTQ) system in the field of die & mold, which is focused on deficiencies of the regulatory system and qualities of die & mold professionals including the master craftsman, engineer, industrial engineer and craftsman. And it is also the purpose of this study to suggest improvement strategies for the NTQ system in the field of the die & mold. This study analyze the NTQ system for the die & mold technologies or skills based on the role model which is matched their business demands, and prepares the authority(such as Human Resources Development Service of Korea) for NTQ creation, combination, abolition, setting questions, and standards correction with priority given to die & mold industry and NTQ. It also offers elective options to reshuffle NTQs through focus group interview by experts.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.53-59
• /
• 2011

Recently there have been considerable attentions on nanoimprint lithography (NIL) by the display device and semiconductor industry due to its potential abilities that enable cost-effective and high-throughput nanofabrication. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper we focused on the deformation of the $2^{nd}$ generation TFT-LCD sized ($370{\times}470mm^2$) large-area soft mold in the UV imprinting process. A mold was fabricated with PDMS(Poly-dimethyl Siloxane) layered glass back plate(t0.5). Besides, the mold includes large surrounding wall type protrusions of 1.9 mm width and the via-hole(7 ${\mu}m$ diameter) patterend area. The large surrounding wall type protrusions cause the proximity effect which severely degrades the uniformity of residual layer in the via-hole patterend area. Therefore the deformation of the mold was calculated by finite element analysis to assess the effect of large surrounding wall type protrusions and the flexiblity of the mold. The deformation of soft mold was verified by the measurements qualitatively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.143-146
• /
• 1995

Due to the recent growth of die/mold machining industry, demands for the high-precision and the high0quality of die product are increasing rapidly. Free surfaces of die/mold are often manufactured using the ball-end milling process. It is difficult to find the cutting condition of the ball-end milling process due to the free form machining for the various tool paths on inclined surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.37-43
• /
• 2002

In recent years, numerous studies have been carried out to find out the possible substitution of PE-coated paperboards used in packaging of watery or oily foods. Accordingly, this study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of synthetic and natural coating agents on the market. Physical properties of coated paperboards were tested. Conclusions obtained from this study were as follows. AKD and PVA showed higher functions than the other synthetic coating agents, while functions of CMC, Com starch and Oxidized starch were higher than those of other natural coating agents. Based on concentrations, AKD 0.5%, PVA 10%, CMC 1.5%, corn starch 6% and oxidized starch 8% were appeared as the proper concentrations. W3 consider that AKD may be suitable for the storage of higher moisture vegetables and other food, and PVA may be suitable for higher oily fried food.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.39-44
• /
• 2007

In order to utilize unsorted ONP, which contains leaflets (printed coated papers), as a raw material to produce pulp mold, optimum conditions for repulping were investigated with the pilot Helico pulper at Centre Technique du Paper (CTP), France. Two major process factors were focused: repulping concentration and rotor speed. Repulping at a higher concentration showed more rapid defibering kinetics. Increasing the rotational speed of rotor at the optimum repulping concentration accelerated the defibering kinetics while it also led to higher fines generation and faster decrease in drainage property of the produced pulp. Hence, an alternative way was suggested: starting repulping at a conventional rotor speed and then accelerating the rotor speed for the last minute(s) of repulping.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.1-10
• /
• 2021

In this study, the current state of the plastics industry has been examined. The direction of development and innovation is reviewed and commented. The technical statuses of various sectors such as thermoplastic resin, composite material, mold engineering, and simulation have been scrutinized. In addition, the industrial status of each sector has been reviewed. Then, the challenges that the plastics manufacturing industry has to deal with have been discussed. Especially, the situation in Republic of Korea has been elaborated in detail. Based on the discussion, an open innovation strategy has been suggested. It has been argued in this work that the open innovation strategy will enables efficient funding and development by avoiding resource consuming rent seeking.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.669-670
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.46-49
• /
• 2003

Microsystem technology (MST) which originated from semiconductor processes has been widely spreaded into tile other industry such as sensors, micro fluidics and displays. The MST, however. has been troubled in spreading with its high cost and material limitations. So, in this paper, new process for micromolding technology using silicone rubber mold was introduced. Silicone rubber mold, which was fabricated by vacuum casting. can be transferred a master pattern to a final product with the same shape but different materials. In order to verify the possibility of application of silicone rubber mold to the MST, its transferability was evaluated. and then it applied to the fabrications of polishing pad and PDP barrier ribs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1380-1387
• /
• 2003

Microsystem technology (MST) which originated from semiconductor processes has been widely spreaded into the other industry such as sensors, micro fluidics and displays. The MST, however, has been troubled in spreading with its high cost and material limitations. So, in this paper, new process for micromolding technology using silicone rubber mold was introduced. Silicone rubber mold, which was fabricated by vacuum casting, can be transferred a master pattern to a final product with the same shape but different materials. In order to verify the possibility of application of silicone rubber mold to the MST, its transferability was evaluated, and then it applied to the fabrications of polishing pad and PDP barrier ribs.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.824-829
• /
• 2018

Molding is the root industry of the manufacturing as a means to mass-produce developed prototypes. Molds are typically divided into injection molds and press mold industries. Injection molds produce the products by injection of molten plastic into a mold, and press molds are molded and bended plate. The ejection system, such as eject pins, is used to separate the manufactured products from the mold, which involves a number of hole operations. Location, diameter and depth of holes are often tabulated and managed collectively when designing 2D drawings. The design efficiency was realized by applying CATIA Automation to the 3D model and bringing in the data of the holes in the Excel data.