• The Journal of the Korean dental association
• /
• v.21 no.12 s.175
• /
• pp.1005-1010
• /
• 1983

To study the eruption process of the permanent tooth, esp., 1st molar, the author took 303 cases of oblique cephalogram (Male. 162 cases, Female: 141 cases) from age 3 to 8 yea old children, and observed the vertical change and axial change. The result were as follow: 1. The mesial end of upper 1st molar was closer to the occlusal plane than the distal, and they were erupting toward the occlusal plane by aging. In the case of lower 1st molar, the distal end was closer to the occlusal plane than the mesial and the occlusion showed the tendency to accord with the plane to be settled by aging. 2. Eruption rate of the upper and lower 1st permanent molar increased rapidly at 5 or 6 years of age. 3. Axial inclination of lower 1st permanent molar to the mandibular plane decreased gradually from 3 years of age, except for 6 years of age. There was some increase at 5 or 6 years of age.

• The Journal of the Korean dental association
• /
• v.50 no.6
• /
• pp.322-328
• /
• 2012

Ectopic eruption of the permanent first molar is defined as the eruption of the tooth in an abnormal position or orientation. It may causes distal root resorption and premature exfoliation of the adjacent primary second molar and uncontrolled space loss is followed. Prolonged partial impaction of the permanent molar may also cause undetected caries or abscess formation of the neighbor teeth. The purpose of this paper is to provide a brief review regarding the etiology, classification, and different management techniques for correcting ectopic eruption of permanent first molar.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.416-422
• /
• 2017

PURPOSE. To investigate the effect of reducing tooth preparation and ceramic thickness on fracture resistance of lithium disilicate crowns. MATERIALS AND METHODS. Specimen preparation included a standard complete crown preparation of a typodont mandibular left first molar with an occlusal reduction of 2 mm, proximal/axial wall reduction of 1.5 mm, and 1.0 mm deep chamfer (Group A). Another typodont mandibular first molar was prepared with less tooth reduction: 1 mm occlusal and proximal/axial wall reduction and 0.8 mm chamfer (Group B). Twenty crowns were milled from each preparation corresponding to control group (n=5) and conditioned group of simultaneous thermal and mechanical loading in aqueous environment (n=15). All crowns were then loaded until fracture to determine the fracture load. RESULTS. The mean (SD) fracture load values (in Newton) for Group A were 2340 (83) and 2149 (649), and for Group B, 1752 (134) and 1054 (249) without and with fatigue, respectively. Reducing tooth preparation thickness significantly decreased fracture load of the crowns at baseline and after fatigue application. After fatigue, the mean fracture load statistically significantly decreased (P<.001) in Group B; however, it was not affected (P>.05) in Group A. CONCLUSION. Reducing the amount of tooth preparation by 0.5 mm on the occlusal and proximal/axial wall with a 0.8 mm chamfer significantly reduced fracture load of the restoration. Tooth reduction required for lithium disilicate crowns is a crucial factor for a long-term successful application of this all-ceramic system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.2
• /
• pp.86-90
• /
• 2023

Objectives: An ectopic tooth is a rare eruption of a tooth out of the normal dental apparatus and occurs commonly with the third molar. Thus, in this study, we reported a case series of ectopic teeth in rare jaw locations and highlight the associated pathology and our experience in the surgical management. Patients and Methods: All cases of ectopic tooth managed at the Department of Oral and Maxillofacial Surgery, University of Maiduguri Teaching Hospital from January 2011 to December 2020 were reviewed. The information retrieved includes biodata, location of the ectopic tooth, signs, symptoms, type of tooth and associated pathology, surgical approach and complications. Results: Ten cases of ectopic teeth were identified over the study period. This comprised 80.0% males with a mean age was 23.3 years. The antrum and lower border of the mandible accounted for 50.0% and 40.0% of the ectopic locations, respectively. Dentigerous cyst was the most associated pathology (70%) and usually presented with pain and swelling. Surgical intervention predominantly via the intraoral route was performed if indicated. Conclusion: Ectopic teeth are rare and not always associated with pathology. A high index of suspicion and radiological investigation are necessary for diagnosis. A more extensive multi-center study is however recommended to determine the prevalence of ectopic teeth other than the third molar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.4
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.17 no.2
• /
• pp.121-127
• /
• 2017

Background: There are no studies regarding 4% articaine infiltration injection into the retro-molar area for an impacted lower third molar (LITM) surgery. This study aimed to evaluate the efficacy of infiltration using 1.7 ml (single cartridge: SC) of 4% articaine versus 3.4 ml (double cartridges: DC) of 4% articaine with 1:100,000 epinephrine in LITM surgery. Method: This study involved 30 healthy patients with symmetrical LITM. The patients were assigned to receive either a DC or SC of 4% articaine with 1:100,000 epinephrine as a local anesthetic for each operation. Onset, duration, profoundness, need for additional anesthetic administration, total volume of anesthetic used, vitality of the tooth, and pain score during operation were recorded. Results: The DC of 4 % articaine had a significantly higher success rate (83.3%) than did the SC (53.3%; P<0.05). The duration of soft tissue anesthesia was longer in the DC group. The intra-operative pain was higher in the SC group with a significant (P < 0.05) requirement for a supplementary local anesthetic. Conclusion: We concluded that using DC for the infiltration injection had a higher success rate, longer duration of anesthesia, less intra-operative pain, and a lower amount of additional anesthesia than SC in the surgical removal of LITM. We recommend that a DC of 4% articaine and a 1:100,000 epinephrine infiltration in the retro-molar region can be an alternative anesthetic for LITM surgery.

• The korean journal of orthodontics
• /
• v.50 no.4
• /
• pp.268-277
• /
• 2020

This case report demonstrates two different uprighting mechanics separately applied to mesially tipped mandibular first and second molars. The biomechanical considerations for application of these mechanisms are also discussed. For repositioning of the first molar, which was severely tipped and deeply impacted, a novel cantilever mechanics was used. The molar tube was bonded in the buccolingual direction to facilitate insertion of a cantilever from the buccal side. By twisting the distal end of the cantilever, sufficient uprighting moment was generated. The mesial end of the cantilever was hooked over the miniscrew placed between the canine and first premolar, which could prevent exertion of an intrusive force to the anterior portion of the dentition as a side effect. For repositioning of the second molar, an uprighting mechanics using a compression force with two step bends incorporated into a nickel-titanium archwire was employed. This generated an uprighting moment as well as a distal force acting on the tipped second molar to regain the lost space for the first molar and bring it into its normal position. This epoch-making uprighting mechanics could also minimize the extrusion of the molar, thereby preventing occlusal interference by increasing interocclusal clearance between the inferiorly placed two step bends and the antagonist tooth. Consequently, the two step bends could help prevent occlusal interference. After 2 years and 11 months of active treatment, a desirable Class I occlusion was successfully achieved without permanent tooth extraction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.2
• /
• pp.229-236
• /
• 2021

Eruption disturbances of the mandibular first molars can cause multiple problems in occlusal development although they are extremely rare. Early diagnosis and treatment are very important to prevent complications associated with eruption disturbances. The present case report describes the treatment of two cases of eruption disturbances of the mandibular first permanent molar. A fixed appliance composed of a cantilever spring with mandibular second deciduous molar as an anchor tooth was used to tract the impacted mandibular first permanent molar. The success of both cases shows that this novel traction appliance can be used to induce the eruption of an impacted mandibular first permanent molar within a short time in patients with intact mandibular second deciduous molar as an anchor tooth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.404-411
• /
• 2012

Tooth impaction is defined as a failure of tooth eruption resulting from the physical obstacles in the eruption path or the abnormal position of the tooth germ. Impaction of mandibular second molar is relatively rare, and it may incite pathologic conditions such as dental caries, periodontitis, or root resorption of adjacent first molar. Thus, early diagnosis and treatment is recommended. In the first case, a 10-year-old male patient, was treated by brass wire to separate the bilaterally impacted mandibular second molars. In the second case, a 12-year-old female patient, was treated with Humphrey appliance for impacted mandibular left second molar, which was detected during a periodical dental examination. In the third case, a 17-year-old female patient with impacted mandibular right second molar, was treated by uprighting spring with mini-implant anchorage around premolar area. In the last case, an 18-year-old male patient, was treated with mini-implant placed on the ramus of mandible connected to the orthodontic buttons bonded on impacted mandibular left second molar by elastic thread.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.185-193
• /
• 1992

The purpose of this study was to evaluate the prevalence and distribution of tooth number anomaly by means of the analysis of panoramic radiographs in 6,531 patients visited the Dental Infirmary of Kyungpook National University Hospital from January 1983 to May 1992. The results were as follows: 1. The prevalence of congenitally missing teeth except third molar was revealed to be 10.8%, and there was a hihger prevalence in females(44.6%) than in males(55.4%). Mandibular 2nd premolars(23.2 %) were absent most frequently, followed by maxillary lateral incisors(18.4 %), mandibular lateral incisors(18.3%), and maxillary second premolars(15.4 %) in descending order of frequency. As to the number of congenitally missing teeth, the percentage of missing one tooth was 48%, missing two teeth was 35.4 %, missing three teeth was 6.6%. 2. he prevalence of congenitally missing third molars was revealed to be 39.7%. There was a higher prevalence n the maxilla(60.3%) than in the mandible(39.7%). Maxillary right 3rd molars(30.6%) were absent most frequently, followed by maxillary left 3rd molar(29.7%), mandibular right 3rd molar(202%), mandibular left 3rd molar(19.5%) in descending order of frequency. 3. The prevalence of supernumerary teeth was revealed to be 4.2%, and there was a higher prevalence in males(65.7%) than in females(34.3 ). They were ound most frequently in maxillary central incisor area(64.8%), followed by maxillary lateral incisor area(132%), posterior area of maxillary third molar(8.7%) in descending order of frequency. As to the number of supernumerary teeth; The percentage of one supernumerary tooth was 79.9%, two supernumerary teeth was 8.9%, three supernumerary teeth was 1.2 %.