• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.180-180
• /
• 2012

Heteroepitaxial GaN nano- and micro-rods (NMRs) are one of the most promising structures for high performance optoelectronic devices such as light emitting diodes, lasers, solar cells integrated with Si-based electric circuits due to their low dislocation density and high surface to volume ratio. However, heteroepitaxial GaN NMRs growth using a metal-organic vapor phase epitaxy (MOVPE) machine is not easy due to their long surface diffusion length at high growth temperature of MOVPE above $1000^{\circ}C$. Recently some research groups reported the fabrication of the heteroepitaxial GaN NMRs by using MOVPE with vapor-liquid-solid (VLS) technique assisted by metal catalyst. However, in the case of the VLS technique, metal catalysts may act as impurities, and the GaN NMRs produced in this mathod have poor directionallity. We have successfully grown the vertically well aligned GaN NMRs on Si (111) substrate by means of self-catalystic growth methods with pulsed-flow injection of precursors. To grow the GaN NMRs with high aspect ratio, we veried the growth conditions such as the growth temperature, reactor pressure, and V/III molar ratio. We confirmed that the surface morphology of GaN was strongly influenced by the surface diffusion of Ga and N adatoms related to the surrounding environment during growth, and we carried out theoretical studies about the relation between the reactor pressure and the growth rate of GaN NMRs. From these results, we successfully explained the growth mechanism of catalyst-free and mask-free heteroepitaxial GaN NMRs on Si (111) substrates. Detailed experimental results will be discussed.

• Journal of Animal Environmental Science
• /
• v.12 no.2
• /
• pp.95-100
• /
• 2006

This study was carried out to develop a continuous process for recovering phosphorus in swine slurry. Magnesium chloride ($MgCl_2$) was used in the test as a magnesium source and the pH was regulated by adding NaOH and aerating. The results showed that the recovery rate of soluble phosphorus (SP) has increased with the molar ratios increased. In case of pH regulated with NaOH, the recovery rates of SP with molar ratio of 1:1.5 were over 95% from both farms. The removal of ammonia-nitrogen was at levels of $4{\sim}9%$. With aeration treatment, the SP recovery rate was 66% and the removal rate of ammonia-nitrogen was 15%. The treatment of NaOH to increase pH showed better SP recovery efficiency than the aeation treatment. However, in case of ammonia-nitrogen removal, the treatment of aeration showed better results than the NaOH treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.261-267
• /
• 2017

The interest in biodiesel is increasing rapidly. As a result, the price of vegetable oil that is used as a raw material for biodiesel is skyrocketing. Studies of biodiesel using animal waste as a means of solving these problems are underway. Biodiesel produced from animal fat contains considerably more saturated fatty acids than that produced from vegetable oil. In addition, it has a high cetane number and a high heating value. On the other hand, the fluidity decreases at lower temperatures because of the large amount of saturated fatty acids. For the biodiesel production, waste chicken oil and soybean oil were first purified. The raw materials were mixed at various ratios from 1:9 to 9:1. The methanol / oil molar ratio was also changed from 7 mol to 15 mol. The entire reaction time was one hour. The results showed that the optimal mixing ratio of soybean oil to waste chicken oil was 3:7, and the optimal methanol / oil molar ratio was 13. Moreover, the BD yield was 90.2%, the FAME content was 96.6%, and the LAME content was 4.1%. This result satisfied the Korea Industrial Standard (KSM2413).

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.219-226
• /
• 1986

The differences of pigment compositions in leaf chloroplast between sun and shade plant were analyzed to investigate the photo-induced destructive effects on shade species under the strong light. Ginseng was selected as a C-3 shade plant, soybean as C-3 sun species and corn as C-4 malate forming sun species. To study the effects of light, ginseng was divided into two subgroups; the 1 and 2 lines received sunlight a little more than those of 3 and 4 lines. Total amounts of chlorophylls, carotenes and xanthophylls were not considerably different among 3 and 4-lined ginseng, soybean and corn. However, the amounts of the three components of 1 and 2-lined ginseng and the chlorophylls content in corn leaves were smaller than those of others. The molar ratio of lutein to total carotenoids was significantly high in ginseng, that of violaxanthin was considerably high in corn and that of neoxanthin the highest in 1 and 2-lined ginseng among tested samples. Chlorophylls to carotenes ratio was 16.0 and highest in ginseng, 13.2 in soybean and 12.0 in corn. In 1 and 2-lined ginseng, the molar ratios of lutein and carotenes were lower while those of neoxanthin and violaxanthin were higher than those of the samples of more light. It was noticeable that an antheraxanthin-like epoxy carotenoid detected in soybean and corn leaves extracts was not observed in ginseng leaf extract.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2013

Conductivity of LSGMC materials were affected by secondary phase segregation, composition and synthetic route. $La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.1}Co_{0.1}O_{3-{\delta}}$ (LSGMC) powders were prepared using the glycine nitrate process to produce high surface area and compositionally homogeneous powders. The powders were synthesized with different 0.5, 1, 1.5, 2, 2.5 of glycine/cation molar ratios. A single perovskite phase from the synthesized powders was characterized with X-ray diffraction patterns. The obtained sintered pellets showed the dense grain microstructure. In case of 1.5 molar ratio, its density was higher than the others. The electrical conductivity measured at $800^{\circ}C$ was observed to be 0.131 $Scm^{-1}$. In addition, the linear thermal expansion behavior was indicated between $25^{\circ}C$ and $800^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.424-429
• /
• 2009

The effects of $Na_2O$, $SiO_2$ and $H_2O$ contents of the synthetic mixtures prepared from water glass on the crystallinity and crystallite size of sodalite were studied. The composition of the synthetic mixtures described by $x\;Na_2O{\cdot}y\;SiO_2{\cdot}Al_2O_3{\cdot}z\;H_2O$ was varied within x=2.5~7.5, y=1.4~3.0, z=140~400. The hydrothermal reaction was carried out at $140^{\circ}C$ for 2 days. High content of $Na_2O$ resulted in the high crystallinity and small crystallite of sodalite. The $SiO_2/Al_2O_3$ molar ratios of around 2 were suitable for the synthesis of sodalite, and produced zeolite species were varied by the $H_2O$ content. Sodalite was mainly obtained with a high crystallinity from the synthetic mixtures with $SiO_2/Al_2O_3$ molar ratio of around 2 and high content of $Na_2O$. The high content of sodium ions caused a decrease in the particle sizes because of their role of structure directing agent.

• Preventive Nutrition and Food Science
• /
• v.9 no.2
• /
• pp.174-182
• /
• 2004

The zinc intake and status of South Koreans from rural, urban and metropolitan areas were compared to evaluate the zinc nutritional status in different regional areas in South Korea. The dietary habits of 721 healthy adult subjects (271 from rural, 240 from urban, 210 from metropolitan city) with an age range 30 ∼ 64 (mean age 54$\pm$18) were assessed using a food frequency questionnaire. Mean daily Zn intake for rural, urban, and metropolitan areas was 6.5 mg, 7.3 mg, and 11.4 mg (p<0.05), respectively, which was 54%,61% and 95% of the Korean RDA for man (12 mg/d). Mean phytate: zinc molar ratios for rural, urban, and metropolitan city were 41, 34, and 30, respectively (p < 0.05), which were higher than the cutoff level of 20 for poor zinc status. The zinc intake and phytate: Zn molar ratio in the rural area were 0.5 and 1.3-fold compared to those of the metropolitan city, which can cause poor zinc nutriture in the rural area. Most of the zinc biomarkers were lower in the rural area than in the metropolitan city (p < 0.05) (mean rural and metropolitan values for plasma Zn: 80.8 $\mu\textrm{g}$/dL and 119.8 $\mu\textrm{g}$/dL, respectively; RBC Zn: 7.8 $\mu\textrm{g}$/dL and 8.8 $\mu\textrm{g}$/dL, respectively; plasma alkaline phosphatase (ALP) activity: 87 mU/mL and 100.4 mU/mL, respectively). It seems that a lower zinc intake in the rural area decreased zinc biomarker levels, such as plasma and RBC zinc, and plasma alkaline phosphatase activity, and caused the poor zinc nutritional status in this area. Most of the zinc biomarkers, such as RBC zinc and urinary and plasma zinc levels, in the subjects from the three localities, were within the normal range even when zinc intake of rural and urban subjects was low. The exception was plasma ALP activity in the rural area, which was lower than the reference level. Thus, marked zinc deficiency in these subjects were not observed, however, the potential for marginal zinc deficiency should be considered, especially for the rural area, because of the low zinc intake and the biomarker levels for marginal zinc deficiency.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.489-496
• /
• 2006

Graft copolymerized polycarboxylate(PC)-type superplasticizers which have carboxylic acid with $\pi$ bond among the molecular structure and polyethyleneglycol methyl ether methacrylate(PMEM) were synthesized by free radical reaction. To investigate their chemical structures and molecular weights, PCs were analyzed by FT-IR(fourier transform spectrometer), C-NMR(nuclear magnetic resonance spectrometer) and GPC(gel permeation chromatograpy). When types of carboxylic acids(methacrylic acid, acrylic acid, maleic anhydride, and itaconic acid) and molar ratios of carboxylic acid/PMEM) were varied, adsorptive and fluid characteristics in cement paste were discussed. As the molar ratio of carboxylic acid/PMEM) was higher, amount adsorbed on the cement particles and the fluidity of cement paste by mini-slump spread testing method were increased. When main chain of PC was methacrylic acid, a larger amount was adsorbed on the cement particles. PCs with acrylic acid as main chain showed higher dispersing power. However, it was confirmed that PCs with dicarboxylic acids(maleic anhydride, itaconic acid) didn't have good adsorption and dispersibility.

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.797-802
• /
• 2003

Structured lipids (SL) were synthesized by esterification of corn oil and conjugated linoleic acid (CLA) in a continuous packed-bed column reactor. The effects of flow rate, reaction temperature, and substrate molar ratios were studied. The reaction was catalyzed by TL IM (immobilized lipase from Thermomyces lanuginosa). Results of triacylglycerol (TAG) analysis by GC showed that the incorporated CLA isomers were mainly cis9, trans11- and trans 10, cis12-CLA. Slower flow rates yielded higher incorporation, and maximum incorporation of CLA was obtained with a molar ratio of 1:3 (corn oil: CLA) at a temperature of $55^{\circ}C$. The obtained SLs had iodine values ranging from 120 to 128. The SLs were composed of TAG $(98{\sim}99%)$, 1,2- and 1,3-diacylglycerol ($0.7{\sim}1.3%$), and a small amount of monoacylglycerol.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.564-570
• /
• 2007

This study investigated the treatment of liquid waste containing highly concentrated iron(III)-ethylenediaminetetraaceticacid (Fe(III)-EDTA) of 70,000 mg/L by an underwater electrical discharge process using low voltage and high current. When AC voltage is applied to the discharging electrode with the other electrode grounded, the temperature of the liquid waste around the discharging electrode rapidly increases, and at the same time, hydrogen and oxygen gases are formed at the electrode as a result of electrochemical reactions. Ultimately, gases formed by vaporization of water and electrochemical reactions cover the electrode. Since the liquid waste is electrically conductive, it elongates the ground electrode up to the border of the gas layer, where electrical discharge occurs. Without hydrogen peroxide, electrical discharge was able to remove about 50% of Fe(III)-EDTA. As the concentration of hydrogen peroxide added increased, the removal efficiency of Fe(III)-EDTA increased. When the molar ratio of hydrogen peroxide to the initial Fe(III)-EDTA was higher than 24.7, more than 80 g of Fe(III)-EDTA was removed with an energy of 1 kWh. A comparison between tungsten and steel electrodes showed that electrode material did not affect the Fe(III)-EDTA removal. In the present underwater electrical discharge process, the removal of Fe(III)-EDTA was completed within 30 min at molar ratios of hydrogen peroxide to the initial Fe(III)-EDTA higher than 24.7.