• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.293-304
• /
• 1996

Historical interest in dielectric properties of agricultural products and definitions of dielectric terms and basic principles governing their influence on elelctromagnetic energy are presented briefly . The nature of dielectric properties variation with frequency, temperature , and product density is discussed, Graphical data on the dielectric properties of products are presented that illustrate the dependence of these properties on moisture content, frequency, temperature, and density. Applications microwave dielectric properties of agricultural products are cited that include radio-frequency (RF) and microwave heating for seed treatment, improvement of nutritional and keeping qualities of some products, and controlling insects in grain. Uses of dielectric properties for product quality measurement and the rapid determination of moisture content are described. Principle of moisture determination in bulk grain by RF and microwave measurements are briefly presented.

• 비파괴검사학회지
• /
• 제37권2호
• /
• pp.99-105
• /
• 2017

Many composite materials are used in the aerospace industry because of their excellent mechanical properties. However, the nature of aviation exposes these materials to high temperature and high moisture conditions depending on climate, location, and altitude. Therefore, the molecular arrangement chemical properties, and mechanical properties of composite materials can be changed under these conditions. As a result, surface disruptions and cracks can be created. Consequently, moisture-impregnating defects can be induced due to the crack and delamination of composite materials as they are repeatedly exposed to moisture absorption moisture release, fatigue environment, temperature changes, and fluid pressure changes. This study evaluates the possibility of detecting the moisture-impregnating defects of CFRP and GFRP honeycomb structure sandwich composite materials, which are the composite materials in the aircraft structure, by using an active infrared thermography technology among non-destructive testing methods. In all experiments, it was possible to distinguish the area and a number of CFRP composite materials more clearly than those of GFRP composite material. The highest detection rate was observed in the heating duration of 50 mHz and the low detection rate was at the heating duration of over 500 mHz. The reflection method showed a higher detection rate than the transmission method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.33-39
• /
• 2015

최근 급속한 기후변화 및 광범위한 사회간접시설의 개발 등으로 인해 사면붕괴가 곳곳에서 발생하고 있으며, 이에 대한 모니터링 및 예방시스템 구축에 대한 사회적인 관심이 증가하고 있는 상태이다. 사면붕괴 메카니즘에 영향을 미치는 중요한 영향인자는 지표내 수분 및 온도이며 이에 대한 변화 추이를 통해 사면붕괴를 예측할 수 있다. 따라서, 사면붕괴 모니터링을 위해서는 지표 깊이별 온도 및 함수비를 연속적으로 측정할 수 있는 복합센싱 기법이 필요하다고 볼 수 있다. 현재까지 온도 및 함수비에 대해 각각의 계측이 가능한 개별 센서는 다양하게 개발되어 있는 상태이지만, 온도 및 함수비를 동시에 연속적으로 측정할 수 있는 복합계측 시스템의 경우에는 많은 연구가 필요한 상태이다. 본 논문에서는 전류소모가 최소화된 측온 회로와 고주파 신호를 토양에 방사하는 수분 측정 센서를 적용한 고정밀 온도-함수비 복합센서를 개발하여 효율적이고 정확도를 향상시킨 사면붕괴 모니터링 시스템에 적용할 수 있도록 하였다. 개발된 복한센서의 성능검증을 위하여 기본성능 표준시험, 실내검증실험, 현장장기실험 등의 다양항 실험적 연구를 수행하였으며, 실험결과를 통해 개발된 복합센서를 이용한 모니터링 시스템은 지반의 온도 및 함수비를 정확하게 모니터링할 수 있는 것으로 나타났다.

• 한국전자파학회논문지
• /
• 제27권7호
• /
• pp.660-663
• /
• 2016

본 논문에서는 초목 층 산란모델과 지표면 산란 모델을 이용하여 초목 층에서 수분함유량 측정에 초목 층과 레이다 파라미터가 갖는 영향에 대하여 분석하였다. $1^{st}$-order RTM(Radiative Transfer Model)을 이용하여 여러 상태의 초목 층 밀도와 입사각, 주파수, 편파를 갖는 데이터베이스를 생성하고, WCM(Water Cloud Model)과 Oh 모델을 이용하여 후방산란계수로부터 지표면 수분함유량을 추출하였다. 수분함유량 추출 에러를 예측하기 위해 추출한 수분함유량과 RTM의 입력 변수인 수분함유량을 비교하였다. 수분함유량 추출 에러로부터 초목 층에서의 수분함유량 측정에서 초목 층 밀도와 입사각, 주파수, 편파에 따른 초목 층과 레이다 파라미터의 영향을 분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.73-75
• /
• 2005

In present measurement of moisture contents is used as one of method for estimating degradation of transformer. Most of people use Karl-Fischer titration method for detection moisture contents but this measurement is inconvenient method because we must analyze transformer oil-paper after dismounting transformer and sampling in field. Therefore we don't directly investigate them in field. In this paper we will introduce Recovery Voltage Method(RVM) that is new method for estimating measurement in field though dismounting facility. For measure of moisture contents using RVM in accordance with accelerated thermal aging we have made experimental test cell and aged at a temperature up to 140$^{\circ}C$ for 300 hours. And we have been measured at intervals of 100 hours using RVM 5462 made in fetter company.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.17-18
• /
• 2021

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data.

• 지질공학
• /
• 제18권3호
• /
• pp.311-319
• /
• 2008

주파수 인피던스를 이용하는 ThetaProbe ML2x인 ADR 형식의 토양함수비센서를 적용하여 주문진 표준사, 상주 화강 풍화토, 장수 편마암풍화토을 대상으로 실험을 수행하였다. 시험의 목적은 측정센서의 측정 정밀도를 측정로드부 삽입 깊이에 따른 변화 양상을 파악하였다. 흙매질은 체적함수비 함량과의 관계를 비교하기 위하여 건조상태와 습윤상태로 구분하여 수행하였다. 측정결과에서 측정로드부가 흙매질 내 5cm 이상 삽입되면 측정전압의 변화폭이 크게 감소하는 것을 파악하였다. 또한, 표준사와 같이 균질한 입자를 가진 흙보다는 점토와 실트 등과 같은 세립질을 함유한 화강풍화토와 편마암풍화토에서 측정전압이 안정적인 형태를 갖는 것으로 나타났다. 따라서, 측정치는 측정로드부가 다공질매질과의 접촉 면적이 커질수록 안정적인 값을 제공한다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.65-70
• /
• 1998

Soil moisture measuring is important for irrigation scheduling of upland crops, estimation of evapotranspiration, and hydrologic modeling. Hence, the comparative study was implemented for the soil moisture measuring instruments, Neutron probe and TDR with soil sampling methods, and the result was represented.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.19-28
• /
• 2005

Passive microwave remote sensing technique have shown great potential for mon monitoring regional/global surface soil moisture. Given a single measurement at dual polarization/single frequency/single view angle, a strategic approach to artificially generating multiple microwave brightness temperatures is presented. And then the statistically generated microwave brightness temperature data are applied to the inverse algorithm, which mainly relies on a physically based microwave emission model and an advanced single-criterion multi-parameter optimization technique, to simultaneously retrieve soil moisture and vegetation characteristics. . The procedure is tested with dual polarized Tropical Rainfall Measurement Mission Microwave Imager (TRMM/TMI) over two different cover sites in Oklahoma and Beltsville field experimental data. The retrieval results are analyzed and show excellent performance.