• 제목/요약/키워드: moisture correction

검색결과 59건 처리시간 0.028초

근적외선을 이용한 온라인 석탄 성상분석 방법 (The Technology for On-line Measurement of Coal Properties by using Near-Infrared)

  • 김동원;이종민;김재성;김학종
    • Korean Chemical Engineering Research
    • /
    • 제45권6호
    • /
    • pp.596-603
    • /
    • 2007
  • 실시간 온라인 석탄 성상분석은 효율적인 석탄 화력발전소 운영을 위해 반드시 필요한 기술이다. 온라인 석탄 성상분석 기술 개발을 위해 다변량 분석기법을 사용하여 확산 반사방식을 통해 얻은 석탄의 근적외선 스펙트럼과 석탄 성상(%)[수분, 회분, 휘발분, 고정탄소, 탄소, 수소, 질소, 산소, 황], 발열량(kcal/kg)간의 관계를 조사하였다. 현재 석탄 화력발전소에서 사용하는 40여종의 석탄에서 얻은 근적외선 스펙트럼을 전처리[2차 미분, MSC(multiplicative scatter correction)]를 통해 물리적 영향을 최소화하여 석탄 성상과의 관계를 PLS(partial least squares regression), PCA(principal component analysis)의 chemometrics 기법을 이용하여 정량 분석하였다. 분석 결과 본 기법을 통해 근적외선 스펙트럼으로 석탄 성상 중 회분, 질소 그리고 황을 제외한 나머지 성분에 대해 분석이 가능함을 확인할 수 있었다. 또한 PC(PLS component)의 값을 이용하여 석탄의 종류를 구별한 다음, 다변량 통계기법을 사용하여 정량 분석한 결과, 전체 석탄을 이용해서 정량 분석한 결과에 비해 비교적 좋은 결과를 얻었다. 수분, 발열량이 실시간으로 분석 가능하여 보다 효율적인 석탄 화력발전소 운영이 가능할 것으로 예상된다.

PREDICTION OF PHYSICO-CHEMICAL AND TEXTURE CHARACTERISTICS OF BEEF BY NEAR INFRARED TRANSMITTANCE SPECTROSCOPY

  • Olivan, Mamen;Delaroza, Begona;Mocha, Mercedes;Martinez, Maria Jesus
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1256-1256
    • /
    • 2001
  • The physico-chemical and texture characteristics of meat determine the nutritional, technological and sensory quality. However, the analysis of meat quality requires expensive, laborious and time consuming analytical methods. The objective of this study was to evaluate NIR spectroscopy using transmittance for determining the moisture, fat, protein and total pigment content, the water holding capacity (WHC) and the toughness of beef meat. A total of 318 spectra were recorded from ground beef samples by a Feed Analyzer 1265 of Infratec. The samples were obtained from the Longissimus muscle of the 10$^{th}$ rib of yearling bulls, ground with an electrical chopper, vacuum packaged, aged during 7 days and frozen at -24$^{\circ}C$ until the analyses were done. Moisture content was measured by oven drying at 10$0^{\circ}C$, fat content was determined by Soxhlet extraction and protein content was estimated from nitrogen content using the Kjeldahl analysis. The total pigment content was determined by the method of Hornsey and the WHC using the method of filter paper press. The instrumental evaluation of texture (maximum load WB, maximum stress MS and toughness) was conducted in an Instron equipment with a Warner-Bratzler shearing device. This analysis was performed on a chop of 3.5 cm obtained from the longissimus of the 8$^{th}$ rib, aged during 7 days, kept frozen at -24$^{\circ}C$ and cooked before the analysis. Near infrared spectra were recorded as log 1/T (T=transmittance) at 2 nm intervals from 850 to 1050 nm using a Feed Analyzer 1265 of Infratec. Calibrations were performed with the WinISI software (vs. 1.02) using the MPLS method. To examine the effect of scatter correction o. derivation of spectra on the calibration performance, calibrations were calculated with the crude spectra or pretreated with different mathematical treatments (inverse MSC, SNVD) and/or second derivative operation. For chemical composition, the use of the scatter corrections improved the calibration statistics, in terms of lower SECV and higher $r^2$. In most of the variables, the use of the 2$^{nd}$ derivative improved the predictions, mainly when combined with the SNVD treatment. However, for predicting the texture traits, the best estimation was obtained from the crude spectrum. These results showed that the equations obtained for predicting moisture, fat and total pigments were very accurate, with $r^2$ being higher that 0.9. However, the prediction of the texture traits (WB, MS, toughness) from ground meat was poor.

  • PDF

식물층에서의 편파별 후방 산란 측정과 산란 모델의 비교 (Comparison between Measurements and Scattering Model for Polarimetric Backscattering from Vegetation Canopies)

  • 홍진영;오이석
    • 한국전자파학회논문지
    • /
    • 제17권9호
    • /
    • pp.804-810
    • /
    • 2006
  • 본 논문은 후방 산란 계수 및 지표면 특성(ground truth)에 대한 측정 방법을 기술하며 후방 산란 계수 측정값과 radiative transfer 이론을 적용하여 개발된 산란 모델을 비교함으로써 산란 모델의 정확성을 검증한다. R 밴드 $(1.7\sim2.0GHz)$의 주파수 대역에서 polarimetric scatterometer 시스템으로 한강생태공원의 수풀 지형에서의 후방 산란 계수를 입사 각도의 변화와 지표면 수분 함유량의 변화에 따라 측정한다. 이 측정 결과를 지표 산란 모델과 비교한 결과 동일 편파의 경우 비교적 잘 일치하며 교차 편파의 경우 보정을 해줌으로써 산란 모델의 정확성을 얻을 수 있다.

Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory

  • Beldjelili, Youcef;Tounsi, Abdelouahed;Mahmoud, S.R.
    • Smart Structures and Systems
    • /
    • 제18권4호
    • /
    • pp.755-786
    • /
    • 2016
  • The hygro-thermo-mechanical bending behavior of sigmoid functionally graded material (S-FGM) plate resting on variable two-parameter elastic foundations is discussed using a four-variable refined plate theory. The material characteristics are distributed within the thickness direction according to the two power law variation in terms of volume fractions of the constituents of the material. By employing a four variable refined plate model, both a trigonometric distribution of the transverse shear strains within the thickness and the zero traction boundary conditions on the top and bottom surfaces of the plate are respected without utilizing shear correction factors. The number of independent variables of the current formulation is four, as against five in other shear deformation models. The governing equations are deduced based on the four-variable refined plate theory incorporating the external load and hygro-thermal influences. The results of this work are compared with those of other shear deformation models. Various numerical examples introducing the influence of power-law index, plate aspect ratio, temperature difference, elastic foundation parameters, and side-to-thickness ratio on the static behavior of S-FGM plates are investigated.

A size-dependent quasi-3D model for wave dispersion analysis of FG nanoplates

  • Karami, Behrouz;Janghorban, Maziar;Shahsavari, Davood;Tounsi, Abdelouahed
    • Steel and Composite Structures
    • /
    • 제28권1호
    • /
    • pp.99-110
    • /
    • 2018
  • In this paper, a new size-dependent quasi-3D plate theory is presented for wave dispersion analysis of functionally graded nanoplates while resting on an elastic foundation and under the hygrothermaal environment. This quasi-3D plate theory considers both thickness stretching influences and shear deformation with the variations of displacements in the thickness direction as a parabolic function. Moreover, the stress-free boundary conditions on both sides of the plate are satisfied without using a shear correction factor. This theory includes five independent unknowns with results in only five governing equations. Size effects are obtained via a higher-order nonlocal strain gradient theory of elasticity. A variational approach is adopted to owning the governing equations employing Hamilton's principle. Solving analytically via Fourier series, these equations gives wave frequencies and phase velocities as a function of wave numbers. The validity of the present results is examined by comparing them with those of the known data in the literature. Parametric studies are conducted for material composition, size dependency, two parametric elastic foundation, temperature and moisture differences, and wave number. Some conclusions are drawn from the parametric studies with respect to the wave characteristics.

저압 테이블과 신소재를 이용한 유화의 지지대 변형에 대한 처리작업 (Treatment for the Deformed Support of Oil Paintings Using Low-Pressure Table and New Materials)

  • 김주삼
    • 보존과학회지
    • /
    • 제6권1호
    • /
    • pp.71-78
    • /
    • 1997
  • 유화는 재료 상호간의 접착력과 온도 및 습도에 대한 서로 다른 반응으로 인해 매우 다양한 피해양상을 보이게 된다. 그중에서 유화에 있어서 지지대의 평면성 변형은 가장 중요한 피해양상이다. 지지대 변형을 조정하기 위해 사용되었던 열, 압력, 수분과 고전적인 재료의 무분별한 사용은 작품에 오히려 피해를 주는 원인이 되었다. 현대회화 복원에 있어서는 이들 위험요소를 가급적 피하는 방법들이 고안되었고, 실제작품들에 시행되어 만족할만한 효과를 거두고 있다 본고에서는 작업시 작품의 안전성을 꾀하고 복원효과의 극대화를 위해 사용되는 저압 테이블, 변형조정틀과 신소재를 이용한 새로운 지지대 변형 조정 방법을 소개하였다.

  • PDF

Monitoring physical and chemical properties of soil in Chungcheongbuk-do

  • Yun-Gu Kang;Jae-Han Lee;Taek-Keun Oh
    • 농업과학연구
    • /
    • 제49권4호
    • /
    • pp.667-676
    • /
    • 2022
  • The soil physical and chemical properties are the main factors that influence plant productivity and soil fertility. Since 1999, South Korea has been conducting a survey on changes in the agricultural environment survey every four years. The purpose of the present study is to monitor the physical and chemical properties of soil in Chungcheongbuk-do. Soil samples were collected from the exact sites of the aforementioned environment survey, and land use and cultivated crops were also investigated. From a Pearson correlation analysis, it was found that the total carbon contents were most negatively affected by the soil depth. The bulk density of soil increased up to a depth of 40 cm but decreased to a depth of 60 cm. The porosity and moisture of soil generally decreased, but the porosity increased at a depth of 50 - 60 cm. Chemical properties of soil gradually decreased with an increase of the soil depth from 0 to 70 cm, but little change was observed in soil pH with soil depth. In addition, the organic matter contents of the soil at a depth of 30 cm or more were below the optimal range. The soil of Chungcheongbuk-do thus requires organic matter application as a whole, and correction of items that are partially out of the optimal range is necessary.

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

저등급석탄(低等級石炭)(인도네시아 IBC)의 고정층(固定層) 반응기(反應器) 실험(實驗)을 통한 건조(乾操) 반응속도론(反應速度論) 연구(硏究) (A Study on Drying Kinetics of Low Rank Coal(Indonesia-IBC) through the Fixed-Bed Reactor Experiments)

  • 강태진;전도만;전영신;강석환;이시훈;김상도;김형택
    • 자원리싸이클링
    • /
    • 제19권6호
    • /
    • pp.43-50
    • /
    • 2010
  • 에너지 위기로 인하여 석탄에 대한 관심이 증가하고 있다. 그 중에서도 저등급석탄에 대한 관심이 증가하고 있는데, 저등급석탄은 수분함량이 30~60%갱도로 수분함량이 높다. 이러한 저등급 석탄을 발전용 연료로 사용하기 위해서는 건조공정이 선행적으로 이루어져야 한다. 본 연구에서는 고정층 반응기를 이용하여 저등급석탄의 건조 반응속도론을 도출하였다. 건조반응속도는 입자크기, 주입가스 온도, 가스 유속, L/D의 영향을 변수로 하여 도출하였다. Reynold's number는 가스 유속과 석탄업자의 크기, L/D는 반응기 직경과 대상탄의 충진양을 보정하기 위해 고려하였다. 석탄의 건조 특성에서도 알 수 있듯이, 고정층 반응기를 이용한 저등급석탄의 건조에 있어서도 표면수분의 건조가 원활하며, 상 경계 반응이 적합한 메커니즘임을 확인 할 수 있었다.

Measurement of Quality Parameters of Honey by Reflectance Spectra

  • Park, Chang-Hyun;Yang, Won-Jun;Sohn, Jae-Hyung;Kim, Jong-Hoon
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1530-1530
    • /
    • 2001
  • The objectives of this study were to develop models to predict quality parameters of Korean bee-honeys by visible and NIR spectroscopic technique. Two kinds of bee-honey fronl acacia and polyflower sources were tested in this study. The honeys were harvested in the spring of 2000 and stored in the storage facility at 20$^{\circ}C$ during experiments. Total of 394 samples of honey were analyzed. Reflectance spectra, moisture contents, ash, invert sugar, sucrose, F/G (fructose/glucose) ratio, HMF (hydroxymethyl furfural), and C12/C13 ratio of honeys were measured. The average values for the tested honeys were 19.9% of moisture contents, 0.12% of ash, 68.4% of invert sugar, 5.7% of sucrose, 1.27 of F/G(fructose/glucose) ratio, 14.4 mg/kg of HMF, and -19.1 of C12/C13 ratio. A spectrophotometer, equipped with a single-beam scanning monochromator (NIR Systems, Model 6500, USA) and a horizontal setup module, was used to collect reflectance data from honey. The reflectance spectra were measured in wavelength ranges of 400∼2,498 nm. with 2 nm of interval. Thirty-two repetitive scans were averaged, transformed to log(1/Reflectance), and then were stored in a microcomputer file, forming one spectrum per measurement. A sample cell and reflectance plate were made to hold honey samples constantly. Spectra of honey samples were divided into a calibration set and a validation set. The calibration set was used during model development, and the validation set was used to predict quality parameters from unknown spectra. The PLS(Partial Least Square) models were developed to predict the quality parameters of honeys. The first and the second derivatives of raw spectra were also used to develop the models with proper smoothing gap. The MSC (multiplicative scatter correction) and the SNV & Dtr.(standard normal variate and detranding) preprocessing were applied to all spectra to minimize sample-to-sample light scatter differences. The PLS models showed good relationships between predicted and measured quality parameters of honeys in the wavelength range of 1100∼2200 nm. However, the PLS analysis was not good enough to predict HMF of honeys.

  • PDF