• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.139-145
• /
• 2016

본 연구에서는 나노클레이 함량에 따른 나노클레이-에폭시 나노복합재료의 흡습 특성 및 기계적 특성을 실험을 통해 분석하였다. 나노복합재료의 흡습 시험, 인장시험 및 접착조인트를 나노클레이 함량에 따라 구성하였으며 이를 통해 수분 포화도, 수분 확산 계수, 인장 강도 및 접착 강도와 같은 특성을 파악 할 수 있었다. 또한 나노클레이 및 에폭시 재료를 분자단위로 모델링하여 재료의 흡습 특성변화의 매커니즘을 분석할 수 있는 분자동역학 시뮬레이션을 수행하였으며 그 결과를 실험결과와 비교하여 고찰하였다. 본 연구에서 제안된 분자동역학 시뮬레이션 기법은 흡습특성의 변화를 성공적으로 예측할 수 있었으며, 추후 다른 나노-복합재료의 연구에도 널리 활용될 것이라 기대된다.

• Geomechanics and Engineering
• /
• 제38권3호
• /
• pp.307-317
• /
• 2024

To get a better understanding of the effect of drying-wetting cycles (DWC) on the mechanical behaviors of silty clay hiving different initial moisture content (IMC), the direct shear tests were performed on sliding band soil taken from a reservoirinduced landslide at the Three Gorges Reservoir area. The results indicated that, as the increasing number of DWC, the shear stress-displacement curves type changed from strain-hardening to strain-softening, and both the soil peak strengths and strength parameters reduced first and then nearly remain unchanged after a certain number of DWC. The effects of DWC on the cohesion were predominated that on the internal friction angle. The IMC of 17% is regarding as the critical moisture content, and the evolution laws of both peak shear strength and strength parameters presented a reversed 'U' type with the rising of the IMC. Based on it, a strength deterioration evolution model incorporating the influence of IMC and DWC was developed to describe the total degradation degree and degradation rate of strength parameters, and the degradation of strength parameters caused by DWC could be counterbalanced to some extent as the soil IMC close to critical moisture content. The microscopic mechanism for the soil strength caused by the IMC and DWC were discussed separately. The research results are of great significance for further understanding the water-weakening mechanicals of the silty clay subjected to the water absorption/desorption.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.787-798
• /
• 2017

본 연구는 시중에 판매되고 있는 시트 타입 마스크 팩의 재질에 따른 특성에 관한 연구이다. 정제수와 1.3-propanediol, 1.3-butylene glycol, Glycerine, Hyaruronic acid와 같은 수용성 성분과 Cyclomethicone, Dimethicone, Phytosqualane, Caprylic Capryl Triglyceride, Grape seed oil, Macadamia Nut oil 오일을 비롯한 다양한 오일의 흡유력을 살펴 본 결과 정제수를 제외한 모든 수용성 성분들은 점도가 커질수록 흡습능력이 커졌고 오일의 경우엔 모든 오일의 점도에 비례하여 흡유 능력이 커짐을 확인할 수 있었다. 이때 마스크 시트의 종류는 초산 발효 바이오셀룰로오스가 수용성 습윤제나 모든 오일에 있어서 500~1,000 배 이상의 함습, 함유 능력을 보여주었는데 이는 표면 구조에서 살펴본 바와 같이 5,000배 이상 확대한 사진에서 보이는 미세한 망상 구조를 이루고 있기 때문이다. 망상 구조는 단면에서도 잘 확인할 수 있었고 이러한 구조적 특징이 함습, 함유 능력을 우수하게 하며 다량 함유된 수용성 성분과 오일은 시간 경과에 따라 배출 또한 용이하게 하는 것으로 사료되는 바이다. 또한 각 마스크 시트는 소재에 따라 그 특성을 보여주고 있기에 피부에 좋은 역할을 할 수 있는 마스크 팩의 제조에 기초 연구로 삼고자 한다.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.594-601
• /
• 2021

본 연구에서는 철강산업의 부산물인 제강슬래그의 도로포장용 건설재료로 사용 확대를 위한 골재의 품질 특성을 연구하는 것으로 골재의 녹물 발생 가능성을 확인하고, 아스팔트 콘크리트 혼합물의 내구성능과 흡음률 평가를 통한 소음 저감 특성을 평가하였다. 골재의 녹물 발생 실험을 수행한 결과, 두 골재에서 녹물이 관찰되지 않아 실제 도로의 수환경에서 녹물 발생 가능성이 매우 낮을 것으로 판단된다. 수분저항성 실험을 수행한 결과, 모든 혼합물에서 85%를 상회하는 인장강도 비를 보였으며 아스팔트 혼합물 기준을 만족하였다. 또한, 제강슬래그를 활용한 아스팔트 포장도로의 구조적 안정성이 일반 포장도로 대비 우수한 것으로 조사되었다. 제강슬래그 혼합물의 흡음 계수는 일반 골재 혼합물보다 높게 측정되었다. 이에, 도로 소음 저감에 제강슬래그 혼합물이 일반 혼합물보다 효과적으로 대응할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.65-78
• /
• 1990

For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.70-75
• /
• 1998

In this paper, the relationships between volumetric mixing ratio of rubber chip and physical and mechanical properties of wood/rubber composite panel was examined in order to investigate the mixture characteristics of wood and rubber chip. Because of the specific gravity of rubber differed from wood chip, physical properties of wood/rubber composite panel was shown very different values by mixing rate of chip element. Specific gravity in air-dry of composite panel was increased rapidly as volumetric percent of rubber chip was increased. Moisture content of composite panel was decreased as volumetric percent of rubber chip element was increased. This results was considered that wood weight is light and porosity material for moisture absorption. Compressive strength and modulus of rupture in bending test were decreased as volumetric percent of rubber chip increased. By mixing ratio control of chip elements, various wood/rubber composite panel can be applicable to every interior materials such as subfloor, playground, and exterior materials such as road blocks for recreational facilities in garden and forest and city parks.

• 보존과학연구
• /
• 통권7호
• /
• pp.56-86
• /
• 1986

The aim of this study is to scientifical conservation for the Sin An Ship. The test object is Pinus massoniana and Cunninghamia lanceolata of Sin An Ship's timber .Comtrast object is water soaked fresh wood of Pinus densiflora and Cryptomeria japonica The results were as follows.1. M. C is 280.9% in high degraded Planking board,237.5% in low degraded Planking board,158.6% in fresh wood of Pinus densiflora,222.6% in Bulkhead167.3% in fresh wood of Cryptomeria japonica2. Absorption rate of P.E.G is good at heating condition ($55∼60^{\circ}C$), especially in highdegraded wood.3. The dimensional change of wood during air drying is somewhat shrinked That's 7.22% in low degraded Planking board9.8% in high degraded Planking board and 4.11% in water soaked Pinus densiflora.4. The dimensional change of wood during P.E.G treatment is mostly swollen of wery small quantity.5. Salinity in desalinization tank showed below 50 p.p.m. It's indicate the end of desalinization treatment.6. Filtration with filter paper was possible up to 40% concentration only. Key words :M.c ; Moisture Content, Absorption rate, Dimension change, Salinity, Filtration.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.51-57
• /
• 2012

Purpose: The compression strength of corrugated fiberboard containers used to package agricultural products rapidly decreases owing to various environmental factors encountered during the distribution of unitized products. The main factors affecting compression strength are moisture absorption, long-term top load, and fatigue caused by shock and vibration during transport. This study characterized the durability of corrugated fiberboard containers for packaging fruits and vegetables under simulated transportation conditions. Methods: Compression tests were done after corrugated fiberboard containers containing fruit were vibrated by an electro-dynamic vibration test system using the power spectral density of routes typically traveled to transport fruits and vegetables in South Korea. Results: To predict loss of compression strength owing to vibration fatigue, a multiple nonlinear regression equation ($r^2=0.9217$, $RMSE=0.6347$) was developed using three independent variables of initial container compression strength, namely top stacked weight, loading weight, and vibration time. To test the applicability of our model, we compared our experimental results with those obtained during a road test in which peaches were transported in corrugated containers. Conclusions: The comparison revealed a highly significant ($p{\leq}0.05$) relationship between the experimental and road-test results.

• Journal of Biosystems Engineering
• /
• 제30권2호
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.75-81
• /
• 1997

It has been used that fluorinated compounds could be applied to cosmetic products. It is that fluorinated conpounds are hydrophobicity and lipophobicity. These fluorinated compounds are reported to form a highly protective and effective film against most aggressive chemical and physical agents. PerfluropolymethyoisopropylEther has homophobicity and are colorless, odorless, tasteless and non-greasy. In this we made a success to formulate the new type of hand care cream using PFPE. PFPE are suitable thickness and chemical inertness to skin. The reason that we select PFPE for this investigation. We developed the new type hand care cream by adsorption and dispersion of PFPE. There are very stable dispersion and highly moisture diffusion control. And these characteristics were verified by actual consumer test.