• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.25-25
• /
• 2010

This paper describes the design and fabrication of a Risk Voltage Meter (RVM) which can analyze the step and touch voltages in grounding systems. The meter consists of a sine-wave power source which generates up to 300 [$V_{rms}$] in ranges of 45 [Hz]~1 [kHz], a 8 Ch. data acquisition module, and a personal computer. Also, a noise elimination method by a digital band-pass filter during measurement is proposed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.92-96
• /
• 2003

Feul-Cell system consists of fuel reformer, stack and energy translator. Among these parts, stack is a core part which produces electricity directly. In order to set a stack module, fabrication of appropriate stack, design of water flow path in stack and control of coolant are needed. Especially, oater or air is used as a coolant to dissipate heat. The different temperature of each electric cell after cooling affects the performance of the stack. Therefore, it is necessary that the relationship between coolant hearing rate, width of stack, properties of stack, and the shape of water flow path must be understood. For the optimal design, the computational simulation by CFD-ACE has been conducted and the resulting database has been constructed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.14-18
• /
• 2003

Feul-cell system consists of fuel reformer, stack and energy translator. Among these parts, slack is a core part which produces electricity directly. In order to set a stack module, fabrication of appropriate stack, design of water flow path in stack, and control of coolant are needed. Especially, water or air is used as a coolant to dissipate heat. The different temperature of each electric cells after cooling and the high temperature of the stack affect the performance of the stack, Therefore, it is necessary that the relationship between coolant, healing rate, width of slack, properties of stack, and the shape of water flow path must be understood. For the optimal design, the computational simulation by CFD-ACE has been conducted and the resulting database has been constructed.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.81-85
• /
• 2000

마이크로파대역에서 우수한 유전적 특성을 가지며 소결이 90$0^{\circ}C$ 이하에서 가능하여 Ag와 동시 소결이 가능한 유전체 조성을 개발하여 RF MCM-C(Multi-chip Module on Ceramic) 제조를 위한 유전체 테잎 제조에 대한 기초적인 실험과 Ag 전극과 동시소성에 대한 반응성 실험을 하였다. 본 실험에 앞서 개발된 유전체 조성의 마이크로대역에서의 유전특성은 유전율 24, 품질계수 30,000 이상, 공진주파수 온도계수 37 ppm/$^{\circ}C$ 이었고 소결온도는 85$0^{\circ}C$이었다. 이 유전체를 이용결함 없는 테잎 제조를 위한 유기용매의 선택, 바인더 및 가소제의 량 및 비에 따른 테잎의 소결 전 .후의 상태를 비교.분석하여 최적의 조성비를 결정하였다. 테잎과 은전극과의 반응성 실험결과 은과 유전체의 상호확산은 거의 이루어지지 않음을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.497-501
• /
• 2003

In order to manufacture ceramic capacitors for the industrial electronic parts application using Tape casting method, the dielectric properties as a functions of sintering temperatures and the fabrication conditions of green sheet were investigated to consider the possibility of applications. When the mixing ratio of powder and solvent in slurry was 65:35, the uniform and dense green sheets was obtained. The dielectric constant was increased as the sintering temperature Over 94% of relative density and high were obtained to the specimens sintered at $1000^{\circ}C$. We can find that the device sintered at higher temperature than $1000^{\circ}C$ showed the relative density over 94% and the dielectric constant over 2000.

• Laser Solutions
• /
• v.12 no.4
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Genomics & Informatics
• /
• v.5 no.3
• /
• pp.133-136
• /
• 2007

The Gene Set network viewer (GSnet) visualizes the functional enrichment of a given gene set with a protein interaction network and is implemented as a plug-in for the Cytoscape platform. The functional enrichment of a given gene set is calculated using a hypergeometric test based on the Gene Ontology annotation. The protein interaction network is estimated using public data. Set operations allow a complex protein interaction network to be decomposed into a functionally-enriched module of interest. GSnet provides a new framework for gene set analysis by integrating a priori knowledge of a biological network with functional enrichment analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2012

Package for artificial satellite is to produce mass production for high package with reliability certification as well as develop SDRAM (synchronous dynamic RAM) module which has such as miniaturization, mass storage, and high reliability in space environment. It requires sophisticated technology with chip stacking or package stacking in order to increase up to 4Gbits or more for mass storage with space technology. To make it better, we should secure suitable processes by doing design, manufacture, and debugging. Pin type PCB substrate was then applied to QFP-Pin type 3D memory package fabrication. These results show that the 3D memory package for artificial satellite scheme is a promising candidate for the realization of our own domestic technologies.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.323-326
• /
• 2003

본 논문은 무선 음성/영상 송수신용 RF모듈 설계 및 제작하였다. RF 주파수는 정보통신부에서 고시한 영상전송용 2410, 2430, 3450, 2470MHz 사용하였으며 IF 주파수는 479.5MHz를 사용하였다. 설계 및 제작된 RF 모듈은 FR-4 재질인 유전체 4.6, 두게 0.8mm, 양면구조의 기판을 사용하여 50mm x 40mm 크기로 제작되었다. 설계된 송신기 모듈은 ＋5V 단일전원으로 9±1dBm의 출력과 주파수허용편차 50×10/sup -6/이하, 스퓨리어스 발사강도 기본주파수의 평균전력보다 40dB이하의 성능을 만족하였다. 수신기 모듈은 +5V 단일 전원으로 -80dBm이하의 수신감도로 만족할만한 성능을 보였다.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.8-13
• /
• 2012

We already fabricated a proto-type HTS charging system with photovoltaic (PV) system and obtained design parameters for DC converter and HTS charging system. In order to develop the real scale charging system efficiently, we suggested a maximum power point tracking (MPPT) controller using a perturb and observe (P&O) MPPT algorithm for PV system. In this paper, we designed and simulated the MPPT controller for the real scale HTS charging system. As well as, the PV module has been analyzed by solving solar cell equivalent equations. The simulated and theoretical results presented here are being considered the next study which addresses the design and fabrication parameters.