• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.69-76
• /
• 2005

본 논문에서는 다중 부호 신호 (MC: multi-code signal)를 정 진폭으로 전송하는 정 진폭 이진 직교 다중 부호 변조 방식 (CABM: constant-amplitude biorthogonal multi-code modulation)을 제안한다. 정 진폭을 유지하기 위해 제안된 CABM 방식에서는 잉여 비트를 사용하여 신호를 부호화 하였다. 제안된 CABM 변조 방식은 매우 높은 스펙트럼 효율을 지원할 수 있다. 또한 본 논문에서는 제안된 CABM 신호를 복조하기 위한 다양한 복조 방식들을 제시하고 기존의 정 진폭 직교 변조 방식 (CAOM: Constant-amplitude orthogonal multi-code modulation)과 그 성능을 비교한다. 제안된 CABM 변/복조 방식은 고속 데이터 율을 제공해야 하는 디지털 무선 통신 시스템으로 사용될 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1160-1163
• /
• 2003

The effects of time delay between a video signal and a current signal applied to velocity modulation coil on free-spot movement and beam size were measured and analyzed quantitatively in this study. The result shows that it is the most important to avoid signal mismatching in order to achieve the optimal velocity modulation performance.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.105-111
• /
• 2005

This paper is concerned with the active vibration control of smart structure using actuator signal made of pulse width modulation. The pulse width modulation has been used in motor control, where the amount of energy fed into the motor is controlled by the pulse width instead of applied voltage. The advantage of using the pulse width modulation is that analog signal can be replaced by the digital signal so that we can reduce system costs and power consumption. The effect of pulse width modulation on the vibration response was investigated in this study and the valid transformation rule was found. Then, the pulse width modulation was realized using a microprocessor and electronic circuit. The active vibration suppression was carried out by combining the positive position feedback controller and the pulse width modulation. The experimental result shows that we can replace an expensive amplifier with a pulse width modulation system thus reducing the system cost. The result also shows that the active vibration control can be achieved by the pulse width modulation technique.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.466-476
• /
• 2021

Frequency-multiplication technology based on microwave photonic principles can be used to generate microwave and millimeter wave signals with a wide frequency tuning range. However, the existing cascaded external modulation frequency-tupling scheme needs to ensure the phase coherence of the modulated Radio Frequency (RF) signal, while the phase modulation directly limits the frequency tuning range of the external modulation frequency multiplication. In this paper, a novel approach for generating an incoherent frequency 12-tupling signal with cascade modulation is proposed. The structure of cascaded dual-parallel Mach-Zehnder modulators can generate a frequency 12-tupling signal. The proposed structure uses no filter or phase control of the RF driving signal. Microwave photonic frequency-tupling was realized under incoherent conditions. Software simulations and experiments validated the proposed structure and proved that it can generate frequency 12-tupling microwave signals under incoherent conditions. Both the frequency range and reliability of the frequency-tupling system has been improved by the proposed structure.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• 한국통신학회논문지
• /
• 제28권6C호
• /
• pp.580-593
• /
• 2003

이 논문은 양자화 오류와 채널왜곡을 고려한 양극왜곡을 최소화시키기 위해 변조신호의 좌표와 소스 인코더를 동시에 최적화하는 방법을 제안한다. 제안된 최적화 과정은 먼저 주어진 변조 신호에 대해서, VQ 부호책을 최적화한다. 그리고 나서 앞 단계에서 얻어진 VQ 부호책에 대해, 변조 신호를 최적화한다. 이 두 과정들은 국소 최적점에 도달할 때까지 반복 시행된다. 또한 본 논문에서는 코드 벡터와 변조 신호들간의 대응 관계를 효율적으로 설정함으로써 전체 시스템의 성능이 개선됨을 보인다. 컴퓨터 실험을 통하여 제안된 시스템이 잡음 없는 채널에서 설계된 VQ 부호책과 기존의 직교 진폭 변조(QAM) 신호를 기반으로 하는 종래의 시스템보다 우수한 성능을 갖음을 보여준다.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.36-45
• /
• 2008

LYNX ESM system operates digital receiver for analyzing radar of intrapulse modulation signal. This paper contains DC offset compensation method of IQ channels, imbalancing comensation method of amplitude and phase, precisional PW measurement using adaptive threshold set, analyzing algorithm of intrapulse modulation signals. Its effectiveness was proven by technical and operational test.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.280-292
• /
• 2014

This article presents a novel cooperative spectrum sharing (CSS) scheme. The primary transmitter transmits a complex Quadrature amplitude modulation (QAM) signal in the first phase, and CSS occurs in the second phase. The secondary transmitter with the largest forwarding channel gain among the nodes that successfully decode the primary signal in the first phase is selected for CSS. This selected node employs a pulse-amplitude modulation (PAM) signal for primary information message (IM) instead of the QAM signal, and it employs a modified PAM signal for the secondary IM. The proposed modified PAM signal depends on the amplitude of the primary PAM signal. This method results in no mutual interference and negligible primary interference constraint and allows a higher degree of exploitation of spatial diversity, thus enabling increase in secondary power to improve primary transmission. The outage performance is enhanced in both the primary and secondary systems. The critical region, in which the primary outage performance is enhanced with the proposed CSS scheme, can be adjusted and widened by varying either the modulation cooperation sharing factor or the number of secondary transmitters.

• International Journal of Computer Science & Network Security
• /
• 제24권3호
• /
• pp.182-188
• /
• 2024

Hardware components are an integral part of Hardware Define Radio (HDR) for seamless operations and optimal performance. On the other hand, Software Define Radio (SDR) is a program that does not rely on any hardware components for its performance. Both of the latter radio programmers utilize modulation functions to make their core components from signal processing viewpoint. The following paper concentrates on SDR based modulation and their performance under different modulations. The bit error rate (BER) of modulations such as PSK, QAM, and PSAM were used as indicators to test channel quality estimation in planar Rayleigh fading. Though it is not commonly used for channel fading, the method of the adder determines the regionally segmented channel fading. Thus, the estimation error of the channel change substantially reduces the performance of the signal, hence, proving to be an effective option. Moreover, this paper also elaborates that BER is calculated as a function of the sample size (signal length) with an average of 20 decibels. Consequently, the size of the results for different modulation schemes has been explored. The analytical results through derivations have been verified through computer simulation. The results focused on parameters of amplitude estimation error for 1dB reduction in the average signal-to-noise ratio, while the combined amplitude deviation estimation error results are obtained for a 3.5 dB reduction

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.102-109
• /
• 2005

In this paper, we propose a new listen-in technique to overcome the problems and the shortcomings which could possibly meet in the previous listen-in methods to deal with the blind signal manually according to operator's decision. In the proposed listen-in method, receiving the signals, classifying the modulation types, and demodulating the signals can be done automatically without operator's intervention. We realize the listen-in technology by developing the high speed frequency tuner, the automatic modulation recognizer, and the signal demodulator. In conclusion, we confirm and show that the developed equipment has a good performance in classifying the modulation type through the computer simulation and the field test.