• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.403-414
• /
• 2024

The aim of this study is to evaluate the productivity of multilayered modular housing units during the prefabrication phase. Additionally, it shows the results of productivity analysis conducted using the Web Cyclone technique. Initially, an review of literature and prior studies helped outline the comprehensive manufacturing process of laminated modular apartments, examining the range of minimum, average, and maximum work durations along with workforce size. Subsequently, the productivity of the multilayered apartments' prefabrication was assessed using the Web Cyclone technique, focusing on the workflow, duration, and personnel involved. This analysis also included a comparison of productivity against the initial plan based on the outcomes of a sensitivity analysis.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.816-825
• /
• 2007

액체 로켓 엔진시스템 개념설계를 위하여 주요 엔진 구성품들에 대한 모듈 프로그램을 통합한 성능 설계 프로그램을 작성하였다. 구성품에 대한 모듈 프로그램은 설계 인자를 수학적으로 묘사하였고, 구성품 간의 유량과 압력을 매칭시켜 각 모듈 프로그램을 통합함으로써 반복계산을 통해 엔진 성능을 예측하는 모듈화 프로그램을 작성하였다. 구성품간의 유량이 조율되고, 유량의 함수로 계산된 각 구성품에서의 압력강하량을 합산하여 터보펌프 출구조건을 부여하도록 하였다. 프로그램의 계산과정과 설계방법을 간략하게 제시하고, 결과는 검증 모델 엔진의 데이터와 비교하여 검증하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.386-391
• /
• 2006

Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.77-84
• /
• 2012

The current architectural design of unit modular has been based on 2D of CAD program, so unit modular character which needs unit information management, as a dried-member system, has no effect on design process. The purpose of this study is We have developed a suitable BIM design process, according to various works of construction, then tried to contribute to supply and activation of the urban-life-housing based on unit modular. The BIM modeling process based on unit modular has been in order of unit combination with preparing manual classification, and, it has been constructed, at construction site, from housing foundation to roof finish by Bottom-up method. At a manufacturing factory, it has been produced in order of 1) grouping materials and parts, 2) fabricating unit boxes, and 3) interference examination of unit boxes, and each order has been classified as housing structure, architecture, plumbing process separately. At a construction site, the fabrication has been done in order of, like as a real housing construction scenario, 1) RC foundation work 2) unit module job-site-fabrication work, 3) roof truss work, 4) plumbing and HVAC work, and 5) housing interior finish work. After modeling process, the interference examination on each work of construction has finally completed modeling. The Unit modular utilizing BIM modeling can make easy housing maintenance through systematic control with preparing manual of unit module information, and securing accurate and speedy construction information. And it will promote design credibility and create maximum effect of unit modular construction method, such as construction period reduction and upgrade of construction quality, etc., through the computer simulation as real as construction environment in cyber space, and with the interfering examination.

• Smart Structures and Systems
• /
• 제21권6호
• /
• pp.715-725
• /
• 2018

Truss-Z (TZ) is an Extremely Modular System (EMS). Such systems allow for creation of structurally sound free-form structures, are comprised of as few types of modules as possible, and are not constrained by a regular tessellation of space. Their objective is to create spatial structures in given environments connecting given terminals without self-intersections and obstacle-intersections. TZ is a skeletal modular system for creating free-form pedestrian ramps and ramp networks. The previous research on TZ focused on global discrete geometric optimization of the spatial configuration of modules. This paper reports on the first attempts at structural optimization of the module for a single-branch TZ. The internal topology and the sizing of module beams are subject to optimization. An important challenge is that the module is to be universal: it must be designed for the worst case scenario, as defined by the module position within a TZ branch and the geometric configuration of the branch itself. There are four variations of each module, and the number of unique TZ configurations grows exponentially with the branch length. The aim is to obtain minimum-mass modules with the von Mises equivalent stress constrained under certain design load. The resulting modules are further evaluated also in terms of the typical structural criterion of compliance.

• 대한건축학회논문집:계획계
• /
• 제36권4호
• /
• pp.113-121
• /
• 2020

The Chinese Architect Wangshu, who won the Pritzker Architecture Prize at 2012, is the first and only winner in China. This study focused on the expression of his unique architectural ideas. Especially with a high interest in Chinese traditional calligraphy and landscape painting, Wangshu tried to use its traditional features to form his own architectural way. First this study looked at the features of calligraphy and landscape painting. Second this research studied the expression of Wangshu's architectural practice in calligraphy's way. Lastly this study furthered study of Wangshu's architecture combined with landscape paintings' features. The results state these following. 1) For calligraphy, he used the "modular composition" of Chinese characters to architectural composition, which included architectural form and materials. The "similarities" and "space creation" of calligraphy are respectively applied to architectural spatial details and site planning. 2) For landscape painting, Wangshu borrows its elements to compose his architecture with "gardening consciousness". The "view method" of paintings was used to his architectural pedestrian flows, and Wangshu also based on the "space creation" of landscape painting to do architectural space design with creating the similar atmosphere.

• 제어로봇시스템학회논문지
• /
• 제6권6호
• /
• pp.478-485
• /
• 2000

A discrete event systems (DES) is a physical system that is discrete in time and state space, asynchronous (event rather than clock-driven), and in some sense generative(or nondeterministic). This paper presents the design of fifteen modular supervisors to control an experimental CIM testbed. These supervisors are nonblocking, controllable and nonconflicting. After verification of the supervisors by simulation, the supervisors for AGV system have been implemented to demonstrate their efficacy.

• 한국실내디자인학회논문집
• /
• 제17호
• /
• pp.30-36
• /
• 1998

The purpose of this research is to suggest improved storage spaces for each room after taking POE survey of a selected twelve houses which were built according to the standard plan for houses in farming and fishing areas by the government from '94 This research was promoted to suggest suitable storage spaces for each room. The focus being on shoe chest storage in the entrance TV and audio set storage decorated shelves in the living room fixed furniture and storage in the bed room cupboard in the kitchen and storage space in multiple purpose room, Based on the number type NONGJIN-95-25-D which is the most popular type in the standard plan for houses in the farming and fishing areas during 1995. According to the survey those 12 points wee of discomfort and the people preferred fixed and modular furniture based on movable shelves. moveable self-assemblable modular furnishings, The survey can be the fundamental data to make that kind of plan for the farming and fishing and fishing people according to their taste.

• 제어로봇시스템학회논문지
• /
• 제20권6호
• /
• pp.625-630
• /
• 2014

Asynchronous digital circuits working in military and space environments are often subject to the adverse effects of radiation faults. In this paper, we propose a new hardening technique against radiation faults. The considered digital system has the structure of DMR (Double Modular Redundancy), in which two sub-systems conduct the same work simultaneously. Based on the output feedback, the proposed scheme diagnoses occurrences of radiation faults and realizes immediate recovery to the normal behavior by overriding parts of memory bits of the faulty sub-system. As a case study, the proposed control scheme is applied to an asynchronous dual ring counter implemented in VHDL code.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.132-139
• /
• 1997

It is difficult for most of passenger cars to attach various types of suspensions. The modular experimental vehicle, which is designed to exchange suspension systems, has been developed to evaluate the effect of design changes of a suspension upon ride and handling characteristics of a vehicle. In order to enable the assemblage between modules, the experimental vehicle design is based on a space frame construction through finite element analysis. Moreover, module frames and brackets are designed using three-dimensional solid modeler to check the interference between each part of a vehicle. Steady-state and transient road tests were performed. Multibody dynamic model and simplified linear vehicle model are made to compare with the tests. The results of simulations and tests show the performance and validity of this experimental vehicle.