• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.321-330
• /
• 1993

Purpose: A retrospective analysis was performed to evaluate the incidence of radiation induced lung damage after the radiation therapy for the patients with carcinoma of the lung. Method and Materials: Sixty-six patients with lung cancer (squamous cell carcinoma 27, adenocarcinoma 14, large cell carcinoma 2, small cell carcinoma 13, unknown 10) were treated with definitive, postoperative or palliative radiation therapy with or without chemotherapy between July 1987 and December 1991. There were 50 males and 16 females with median age of 63 years (range: 33~80 years). Total lung doses ranged from 500 to 6,660 cGy (median 3960 cGy) given in 2 to 38 fractions (median 20) over a range or 2 to 150 days (median in days) using 6 MV or 15 MV linear accelerator. To represent different fractionation schedules of equivalent biological effect, the estimated single dose (ED) model, $ED=D{\dot}N^{-0.377}{\dot}T^{-0.058}$ was used in which D was the lung dose in cGy, N was the number of fractions, and T was the overall treatment time in days. The range of ED was 370 to 1357. The endpoint was a visible increase in lung density within the irradiated volume on chest X-ray as observed independently by three diagnostic radiologists. Patients were grouped according to ED, treatment duration, treatment modality and age, and the percent incidence of pulmonary damage for each group was determined. Result: In 40 of 66 patients, radiation induced change was seen on chest radiographs between 11 days and 314 days after initiation of radiation therapy. The incidence of radiation pneumonitis was increased according to increased ED, which was statistically significant (p=0.001). Roentgenographic changes consistent with radiation pneumonitis were seen in $100\%$ of patients receiving radiotherapy after lobectomy or pneumonectomy, which was not statistically significant. In 32 patients who also received chemotherapy, there was no difference in the incidence of radiation induced change between the group with radiation alone and the group with radiation and chemotherapy, among the sequence of chemotherapy No correlation was seen between incidence of radiation pneumonitis and age or sex. Conclusions: The occurrence of radiation pneumonitis varies. The incidence of radiation pneumonitis depends on radiation total dose, nature of fractionation, duration of therapy, and modifying factors such as lobectomy or pneumonectomy.

• KDI Journal of Economic Policy
• /
• v.35 no.2
• /
• pp.71-105
• /
• 2013

Now that fiscal soundness is increasingly important influenced by the euro area fiscal crisis, early budget execution has been under the spotlight as a tool for economy control, other than typical expansionary method, such as supplementary budget. Basically, early budget execution is a fiscal policy instrument that reponses to economic fluctuations through modifying the inter-temporal allocation of fiscal expenditure within budget, without affecting fiscal soundness. This study empirically examines how effective the intert-temporal reallocation of fiscal expenditure is in economy control. Using Korea's Consolidated Fiscal data, the size of inter-temporal reallocation of fiscal expenditure is defined as changes of fiscal expenditure for one year excluding seasonal factors and used to explain real economic growth rate, a dependent variable. The result shows that the macroeconomic effect of the inter-temporal reallocation turns out meaningful in general, though some policy time lag exists. Meanwhile, a simulation using macroeconomic model finds that overall effect on economic growth is not large because increase in fiscal expenditure allocation at a certain point of time is canceled by the opposite direction within the same fiscal year. However, the inter-temporal reallocation is found to reduce volatility of key macroeconomic variables so as to contribute to partially stabilizing macroeconomy. In particular, such effect of economic stabilization seems to be highly apparent at the time of financial crisis, but not very noticeable in normal economic cycle.

• Korean Journal of Social Welfare
• /
• v.63 no.1
• /
• pp.267-289
• /
• 2011

The purpose of the present study was to develop a Korean version of the scale of attitudes for disabled Persons and attitudes towards disabled person-original by translating and modifying the scale proposed by Antonak(1982). In order to test validation, this study was focused on processing survey and statistic data analysis and tried to find a way to applicate in Korea. The data were collected from 500 non-disabled persons divided into two groups, which were consist of target group (public officials, health care providers, teachers, journalists and rehabilitation facility staffs) and general group. Based on the descriptive analysis, exploratory factor analysis and confirmatory factor analysis of the data, validity and reliability were examined. Also to find the statistic significant difference on attitudes towards disabled person between target group and general group, t-test was proceed. The result of the exploratory factor analysis drew 15 items representing 3 factors (Pessimism-Stereotype, Optimism-Human Rights, Derogatory Personality Stereotype). A confirmatory factor analysis results provided the construct validity of this scale as good and reasonable fitness. Cronbach's alpha ranged from .67 to .85 showed internal consistencies of the sub-scales. The subscales were significantly correlated with convergent with DFS(Disability Factor Scale) variables. And the target group had more positive attitudes toward disabled person than general group. It is suggested this scale more suitable for various disability types be elaborated, and get a practical implication on attitudes towards disabled person.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.1 no.1
• /
• pp.28-44
• /
• 1998

This study was conducted to suggest the ecological restoration strategies for the disturbed landscapes by theoretical study. Especially, it is aimed to suggest three objectives for restoration by using native plants ; (1) prevention or reduction of wind and water erosion, (2) provision of food and cover for variety of animal species, (3) improvement of the visual or aesthetic quality of disturbed sites. The main results were summarized as follows. 1. Cooperation between restoration ecologists and restoration practitioners is needed to delineate a scientific approach to restoration ; (1) Being aware of published literature that describes similar work and/or establish general principles. (2) Preparedness to carry out proper experiments to test ideas. (3) Preparedness to monitor fundamental parameters in a restoration scheme. (4) Providing information about the behavior of species. (5) Publish results. 2. There are three models of succession in theories of plant succession. The tolerance and facilitation models were recommended to ecological restoration. The inhibition model applies in most secondary succession, but the actual species which are introduced first may inhibit the germination and growth of slower-growing species, or they may prevent the growth of other species whose propagules arrive later. 3. The objectives of erosion control, wildlife habitat provision, and visual quality improvement are not mutually exclusive. However, many revegetation practices in the past have emphasized one of these aspects at the expense of the others. 4. A native plant community can be the model of ecological restoration. By stylization/abstraction of native plant community, trying to learn the most essential characteristics of community types - environmental factors ; dominant, prevalent, and "visual essence" species composition - in order to use such information in restoration. 5. After developing mass/spaces plan, match plant communities to the mass/space plan. In utilizing community grouping, there needs aesthetic ability to understand design elements. 6. Several hydrophytes such as Pennisetum saccharifluous, Themeda triandra, Cirsium pendulum show relatively good germination rates. In case of mesophytes and xerophytes, Arundinella hina, Artemisia princeps, Oenothera odorata and legumes seem to have quick-germinating abilities at barren sites. Pinus thunbergii, Rhus chinensis, Evodia daniellii, Alnus firma and Albizzia julibrissin can be considered as "late succession" woody plants because they show low germinating rates and slow growing habitat. 7. The seeds used for restoration should be collected within a certain radius of where it will be planted. Consideration in genetic issues in the collection and use of germplasm can increase the odds for successful restoration efforts. 8. The useful model in the "drift" pattern occurs so abundantly in naturally evolving landscapes. As one species diminishes in density, a second or third species are increased. Thus, dynamic interactions between species are created. Careful using of "drift phenomenon" in planting was recommended. 9. Virtually no stand of vegetation today is immune from the introduction and/or spreading of exotic species. Therefore, the perpetuation of a restored sites requires conscious monitoring and management. Thus, management would be the most important process in ecological restoration. 10. In order to keep the sites "natural", alternative management strategies would be applied in management ; Atenative management strategies are decelerating successional process, accelerating successional processes or modifying species composition. As management tools, mechanical, chemical, biological or environmental factor manipulation, e.g., fire could be used.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.63-69
• /
• 2017

In the early 1990s, IETF(Internet Engineering TaskForce) had started the discussion on new address protocol that can modify and supplement various drawbacks of existing IPv4 address protocol with the introduction of CIDR(Classless Inter-Domain Routing) which is a temporary solution for IPv4 address depletion, NAT, private IP address. While various standards related to new address protocol has been proposed, the SIPP(Simple Internet Protocol Plus) was adopted among them because it is regarded as the most promising solution. And this protocol has been developed into current IPv6. The new concepts are introduced with modifying a lot of deficiencies in the exisitng IPv4 such as real-time data processing, performance on QoS, security and the efficiency of routing. Since many security threats in IPv6 environment still exist, the necessity of stable data communication environment has been brought up continuously. This paper deveopled one-way communication algorithm in IPv6 based on the high possibility of protecting the system from uncertain and potential risk factors if the data is transmitted in one way. After the analysis of existing IPv6 and ICMPv6, this paper suggests one-way communication algorithm as a solution for existing IPv6 and ICMPv6 environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.73-80
• /
• 2019

In this paper, the basic design of the electric hydraulic sliding deck system was developed to develop the electric hydraulic sliding deck which can easily upgrade the loading and unloading of the agricultural machinery by modifying the load of the existing 5ton cargo truck. Through the kinematic analysis, The length and structure of the specimens were designed and the materials were selected for safety and economical efficiency through structural analysis. For the basic design of the sliding deck system, we surveyed the agricultural machinery to be transported and selected necessary elements. And have devised a system using a hydraulic cylinder that can meet selected factors. Through the simplified modeling and kinematic diagram, the operating structure of the sliding deck system was grasped and the minimum length and structure of the sliding deck were devised, In order to select the sliding deck material satisfying, four representative materials used in the automobile structure were selected. Selected the parts to be analyzed and compared the stresses and deformation amounts according to the material under the conditions of maximum load through simplified modeling. As a result, SS41P material was used to reduce the unit cost and to achieve safety. The winch system was designed and applied for moving up and down of the farm machinery which can not be operated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.511-518
• /
• 2009

This study was intended to compare and evaluate the adhesion of High flowing Self-compacting Concrete (HSCC), Conventional Concrete (CC) and deformed bar based on concrete strength 3 (30, 50 and 70 MPa), among the factors affecting the bond strength between concrete and rebar, after fabricating the specimen by modifying the rebar position at Horizontal reinforcement at bottom position (HB), horizontal reinforcement at top position (HT) and vertical reinforcement type (V). As a result of measuring bond strength of HB/HT rebar to evaluate the factor of the rebar at top position, the bond strength of HB/HT rebar at 50 and 70 MPa was 1.3 or less and at 30 MPa, HSCC and CC appeared to be 1.2 and 2,1, respectively. Thus, when designing the anchorage length according to the concrete structure design standard (2007) at HSCC 30, 50 and 70 MPa, it would be desirable to reduce the correction factor of anchorage length of the horizontal reinforcement at top position, which is suggested for the reinforcement at top position, to less than 1.3 of CC.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.150-156
• /
• 2024

One of the key factors in research regarding long-distance laser beam propagation, as in free-space optical communication or laser power transmission, is the transmission efficiency of the laser beam. As a way to improve efficiency, we perform extensive numerical simulations of the effect of modifying the laser beam's profile, especially replacing the fundamental Gaussian beam with a super-Gaussian beam. Numerical simulations of the transmitted power in the ideal diffraction-limited beam diameter determined by the optical system of the transmitter, after about 1-km propagation, reveal that the second-order super-Gaussian beam can yield superior performance to that of the fundamental Gaussian beam, in both single-channel and coherently combined multi-channel laser transmitters. The improvement of the transmission efficiency for a 1-km propagation distance when using a second-order super-Gaussian beam, in comparison with a fundamental Gaussian beam, is estimated at over 1.2% in the singlechannel laser transmitter, and over 4.2% and over 4.6% in coherently combined 3- and 7-channel laser transmitters, respectively. For a range of the propagation distance varying from 750 to 1,250 m, the improvement in transmission efficiency by use of the second-order super-Gaussian beam is estimated at over 1.2% in the single-channel laser transmitter, and over 4.1% and over 4.0% in the coherently combined 3- and 7-channel laser transmitters, respectively. These simulation results will pave the way for future advances in the generation of higher-order super-Gaussian beams and the development of long-distance optical energy-transfer technology.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.2 s.50
• /
• pp.334-346
• /
• 1995

To investigate the factors influencing workers' perception and attitude toward special periodic health screening test for workers, a survey with self-administered questionnaires was performed on 779 workers who had special periodic health screening test from September 1 to October 15, 1994. A study model was developed by modifying the health belief model. The end and intermediate response variables of the model were the voluntary participation and necessity perception on the special screening for workers. The result of analysis was consistent with the study model. Rates for the necessity perception and voluntary participation on the special screening for workers were 77.2%, 79.2%, respectively. Factors influencing on the voluntary participation were necessity perception, benefit of special screening for workers, and cue to action. And on the necessity perception were susceptibility and severity to occupational disease, knowledge to special screening for workers, and support of company. General and occupational characteristics influencing on the susceptibility and severity to occupational disease were sex, age, educational level, work duration, and health education. On the knowledge to special screening for workers were age, educational level, work duration, and locus-of-control. On the benefit of special screening for workers were age, locus-of-control, pride on health, and health education. Therefore, to increase the voluntary participation and necessity perception on the special periodic health screening for workers, 1) if a worker is judged as occupational disease, the judgment should be widely known in his workplace, 2) the screening result forms should be directly sent to the workers themselves, 3) for the positivity of employers, the campaign and education program subjected to them should be planned, 4) health education should give the first consideration to the younger, lower educational level, and newly employed women, and its frequency should be increased and it should be more frequently dealt with occupation-related subjects, and 5) the employers should have a careful concern in not being disadvantageous to workers due to result of screening.