• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.247-252
• /
• 2003

This study is to research on two phase printing method by use of colorants extracted from sappan wood. As for the research, printing effect of printing paste, streaming time, optimal mordant concentration, change of surface color and colorfastness were measured. This experiment showed that modified starch were best on surface color among the modified starch, sodium-alginate, guar gum. And the surface color was best when the steaming time was 60 minutes, mordant concentration 8%(ow.f). And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.60-65
• /
• 2001

Physicochemical properties of 4 kinds of domestic and 7 kinds of foreign starch vermicelli (1 from Chinese, 6 from Japan) were determined. Peak temperature of starch vermicelli measured by DSC were $42{\sim}48^{\circ}C$ which were much lower than gelatinization temperatures of their raw material starches. X-ray diffraction peaks of starch vermicelli were not sharp compared with those of raw material starches which indicated that starches were gelatinized by heating and retrograded by cooling and freezing during production of starch vermicelli. Hardness and compression slope of sweet potato starch vermicelli measured by rheometer were respectively $9,500{\sim}11,000\;g/cm^2$ and $18,000{\sim}26,000\;g/cm^2$ which were twice higher than those of corn starch vermicelli. Cooking loss of corn starch vermicelli, which was 19.8%, was higher than that of sweet potato starch vermicelli, $4.2{\sim}6.6%$ and mung bean starch vermicelli, 7.7%. In changes of thickness of starch vermicelli during cooking i.e swelling ratio, sweet potato starch vermicelli had $58{\sim}69%$ of swelling ratio, which was higher than that of corn starch vermicelli, 50%. Corn starch vermicelli, which was relatively less elastic and easily broken, was shown to be inferior to that of sweet potato starch vermicelli in overall quality.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.234-240
• /
• 2008

The optimal conditions for the production of branched dextrin from com starch (CSBD) using branching enzyme (BE) were established by investigating the degree of retrogradation of the gelatinized starch. The physicochemical properties of CSBD prepared using the established process were evaluated. It was found that physicochemical properties of com starch were greatly modified by BE treatment. CSBD had a higher dextrose-equivalent value and water solubility than the corresponding control. On the other hand, the viscosities in gelatinized solution and amylose contents of CSBD were lower than those of the control. A high-performance size-exclusion chromatography/multiangle laser light scattering/retractive index (HPSEC/MALLS/RI) system showed that the average molecular weight of CSBD was lower than that of the control. The pasting viscosities of CSBD were stable during the entire temperature cycle. In general, the BE treatment resulted in the retrogradation during storage being lower for CSBD than for the control.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.50-55
• /
• 2014

An oxidized starch was modified for surface sizing via etherification and esterification. Propylene oxide (PO), sodium monochloroacetate (SMCA), and acrylonitrile (AN) were used as etherification, and vinyl acetate monomer (VAM), maleic anhydride (MA), fumaric acid (FA), and itaconic acid (ITA) were used for esterification. Esterification and etherification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14 to 16%. Surface sizing performance of starches in tensile strength, stiffness and compressive strength was improved by esterification and etherification of the oxidized starch. Especially, SMCA etherification was found to be the most effective modification method.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Food Science and Industry
• /
• v.47 no.3
• /
• pp.2-10
• /
• 2014

• Korean journal of food and cookery science
• /
• v.18 no.2
• /
• pp.200-205
• /
• 2002

Corn starch was modified by the oxidation with sodium hypochlorite(NaOCl) and the changes in the distribution of molecular weight were examined. Corn starch was oxidized with 0.25, 0.5, 0.75, 1.0, and 1.5% active Cl/g of starch at pH 7.0 and 25$^{\circ}C$ for 10 min. Oxidation of corn starch caused a change in the molecular weight distribution of amylopectin. The fraction of highest molecular weight in native starch decreased gradually and the fraction of lower molecular weight increased with increasing oxidation. Also, λ$\sub$max/ and iodine binding capacities of oxidized starches decreased and the soluble carbohydrate content increased by oxidation. The differential scanning calorimetric results of oxidized starches showed that the temperature and enthalpies of gelatinization were not changed by oxidation; however, the more the starch was oxidized, the greater the extent of retrogradation.

• Applied Biological Chemistry
• /
• v.35 no.5
• /
• pp.404-409
• /
• 1992

Hydroxypropylated starches and acetylated starches were prepared by reaction of potato starch with propylene oxide and acetic anhydride, respectively and then degree of retrogradation and swelling power were investigated in different pHs and temperature. The extent of retrogradation determined by glucoamylase method during freeze-thaw treatment and storage in low temperature $(0{\sim}5^{\circ}C)$ showed that modified potato starches were slowly retrograded as the increase of degree of substitution. The order of the retrogradation tendencies in different pHs were pH 4>pH 6>pH 8>pH 10. Retrogradation of hydroxypropylated potato starches were less than that of acetylated potato starches. Swelling power of starches were influenced more by the temperature than by the pH. The order of the swelling power tendencies in different pHs were pH 10>pH 2>pH 8>pH 4>pH 6.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.164-168
• /
• 2009

The effects of chemically modified thermoplastic starch (CMPS) on the morphology, thermal and mechanical properties of the blends of poly (lactic acid)(PLA) and poly(butylene adipate-co-terephthalate)(PBAT) were studied. Blends of PLA/PBAT with the CMPS contents of 10, 20 and 30 wt% on the basis of PLA/PBAT weight were prepared by a twin screw extruder. The morphology, thermal and mechanical properties of the blends were examined by using scanning electron microscope (SEM), differential scanning calorimeter (DSC) and a tensile tester. The DSC study revealed that PLA/PBAT blends are thermodynamically immiscible, while the compatibility was much improved by addition of the CMPS.

• Korean journal of food and cookery science
• /
• v.29 no.5
• /
• pp.469-478
• /
• 2013

The effects of tapioca starch (TS) and tapioca modified starch (TMS) as additives on the quality characteristics of rice cookies were investigated in this study. The amounts of TS and TMS replaced were 5, 10 and 15%(w/w) based on 100 g of rice flour. At the result of rapid viscosity analyser (RVA) properties of rice flour added with starches, peak, trough, and final viscosity of rice flour added with TMS decreased significantly(p<0.05). Hardness of dough and cookies as measured by Texture analyzer (TA) significantly decreased upon addition of TMS, and hardness of cookies significantly decreased upon addition of TS, hardness of cookies TMS lower than TS. L value of dough and cookies increased upon addition of TMS, whereas a value decreased upon addition of TMS. Spreadability of cookies increased upon addition of TMS, 10% TMS is the highest. Bulk density of dough decreased upon addition of TMS, bulk density of cookies decreased upon addition of TS and TMS, and bulk density of TMS cookie lower than TS cookie. In sensory evaluation, 10% TS added rice cookies showed the highest score in overall acceptability, hardness, brittleness, color, softness, taste and flavor, and 15% TS added rice cookies showed the highest score in appearance. And 15% TMS added rice cookies showed the highest score in overall acceptability, taste, brittleness, flavor, and 10% TMS added rice cookies showed the highest score in hardness, flavor, taste and color. It is indicated that the quality characteristics and sensory characteristics of the rice cookie can be improved by adding TS and TMS.