• Food Science and Biotechnology
• /
• v.16 no.4
• /
• pp.646-649
• /
• 2007

The effect of the addition of 2 kinds of chemically modified starches (the anti-caking agents; tapioca starch and com starch) on caking of ramen soup was observed using a low-resolution proton-pulsed nuclear magnetic resonance (NMR) technique. After storing ramen soup samples with diverse compositions of modified starch at 20-40% relative humidity for 4 weeks, changes in the spin-spin relaxation time constant ($T_2$) were measured as a function of temperature. $T_2-Temperature$ curves for ramen soup containing modified starches showed that the caking initiation temperature (glass transition temperature) was increased by $5^{\circ}C$ following the addition of only 0.5% modified cornstarch. The results indicate that the modified com starch used in this study would be an effective anti-caking agent for ramen soup, thus prolonging the shelf life of the product.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.700-706
• /
• 2005

The objectives of this research were to analyze physicochemical properties of physically modified rice starch which was prepared by hydro-shear homogenizer and ultrasonic homogenizer. The 5:1 of water to starch ratio, 20,500 rpm of hydro-shear homogenizer, and 5 sec of pulse and 40 kHz of frequency of ultrasonic homogenizer, which were operated for 10 min. The 1/3 of size reduction of raw rice starch and gelatinized rice starch, and reduced of particle size were achieved by above processing conditions. The homogenization of raw rice starch and gelatinized rice starch were higher values of specific area, transmittance, solubility and swelling power than control. While, these had lower value of apparent viscosity than control. In raw rice starch, the gelatinization characteristics of ultrasonic homogenizer treated rice starch had some higher values of gelatinization temperature, peak temperature and enthalpy than those of control. While, those of hydro-shear homogenizer treated rice starch had similar values to those of control.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.159-164
• /
• 1998

pH stability of sweet potato $\beta$-amylase modified with IO4-oxidized soluble starch was increased at pH 3, 5~9 and 11. And optimum pH was 3 and 5 for modification. Thermal stability of the enzyme modified with IO4-oxidized soluble starch was increased at 6$0^{\circ}C$ for 15 min. pH stability of barley $\beta$-amylase modified with IO4-oxidized soluble starch was increased at 3~4 and 8~11, and more increased at pH 3 and 8~11 in the presence of $\alpha$-cyclodextrin.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.428-435
• /
• 1994

Properties of modified rice starches prepared in drum drying and extrusion were evaluated to use for effective utilization. Blue value was the lowest (p<0.05) for waxy rice starch and L value was decreased after modification of starches. Water solubility index was the highest for modified starches prepared in extrusion, while water absorption index was the highest for modified starches prepared in drum drying. Cold-Water-Solubility was the highest (p<0.05) for modified rice starch prepared in drum drying (RD). Consistency index of RD was drastically increased as shear rate increased and yield stress was the highest for RD. Results of Gel Permeation Chromatography showed that starch components were broken down into lower molecular weight materials and amylose are degraded by modification. Changes in the X-ray diffrectometry pattern indicated the transformation of granule into an amorphous state during modification and illustrated V-type.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.689-695
• /
• 2017

Ohmic heating is an internal heating method based on the principle that when an electrical current passes through food, electric resistance heat is uniformly generated internally by food resistance. Previous studies indicate that the thermal properties, external structure, internal structure, and swelling power of ohmic heat treated starch of various starches, such as potato, wheat, corn, and sweet potato, differed from those of conventional heating at the same temperature. In this study, the pasting property of starch, treated with ohmic and conventional heating, were measured by RVA (Rapid Visco-Analyzer). Our results show that as the ohmic heating temperature increased, the PV (Paste Viscosity) of the starch decreased significantly, and the PT (Pasting Temperature) increased. Changes in PV and PT indicate that the swelling of starch remains unchanged by ohm heating. The HPV (Hot Paste Viscosity), CPV (Cold Paste Viscosity) and SV (Setback Viscosity) of ohmic heated starch also differed from the conventional heated starch. The pasting property is similar to the viscosity curve of common cross-linked modified starch. In this experiment, we further confirm the similarity with modified starch and its usability.

• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.313-318
• /
• 2001

Physicochemical properties of starch vermicelli (Dangmyun) made with different starches in laboratory were determined to develop a modified corn starch comparable to sweet potato starch which is highly expensive than corn starch but commonly used for starch vermicelli in Korea. Initial temperatures (Ti) of gelatinization of starch vermicelli made in laboratory measured by differential scanning calorimeter, which were above $60^{\circ}C$, were higher than those of starch vermicelli in the market. Their X-ray diffraction peaks were relatively sharp compared with those of starch vermicelli in the market, which showed that starches were not completely gelatinized during the process of starch vermicelli preparation in laboratory. Initial temperature (Ti) of corn starch vermicelli was decreased by $3^{\circ}C$ by hydroxypropylation but increased by $2.5^{\circ}C$ by oxidation. Hardness and compression slope of sweet potato starch vermicelli and mungbean starch vermicelli, which were $11,726{\sim}12,555\;g/cm^2$ and $29,914{\sim}30,604\;g/cm^2$, respectively, were the highest in the samples and those of waxy corn starch were lowest. Hardness and compression slope of starch vermicelli made with corn starch slightly oxidized in the concentration of 0.5% NaOCl at pH 9.0, $40^{\circ}C$ for 30 min. increased and found to be comparable to those of sweet potato starch vermicelli.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.514-520
• /
• 1996

The purpose of this study was to develop the production technology of modified starch. Corn starches were gamma irradiated at 0-110 kGy and the effect of irradiation dose levels on the physicochemical properties of corn starches were investigated. Blue value linearly decreased, while alkali number and solubility markedly increased as irradiation dose levels were increased. The optical transmittance increased as applied irradiation dose levels were increased in the temperature range of $65-95^{\circ}C.$ Water binding capacity and swelling power showed maximum value at 30 and 10 kGy, respectively and they tended to decrease thereafter. Gelatinization viscosity of the gamma irradiated starch considerably decreased as compared to that of the non-irradiated starch. Irradiation at 110kGy resulted in a marked reduction of peak viscosity and cooling viscosity at $30^{\circ}C$ by 100 and 300 times, respectively. The physicochemical properties of corn starch irradiated at 30 kGy were similar to those of commercial acid-modified starch, while those of corn starch irradiated at 100 kGy were similar to those if oxidized starch.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.342-356
• /
• 2016

Purpose: The drying of a thin layer of native cassava starch in a tray dryer was modeled to establish an equation for predicting the drying behavior under given conditions. Methods: Drying tests were performed using samples of native cassava starch over a temperature range of $40-60^{\circ}C$. We investigated the variation in the drying time, dynamic equilibrium moisture content, drying rate period, critical moisture content, and effective diffusivity of the starch with temperature. The starch diffusion coefficient and drying activation energy were determined. A modification of the model developed by Hii et al. was devised and tested alongside fourteen other models. Results: For starch with an initial moisture content of 82% (db), the drying time and dynamic equilibrium moisture content decreased as the temperature increased. The constant drying rate phase preceded the falling rate phase between $40-55^{\circ}C$. Drying at $60^{\circ}C$ occurred only in the falling rate phase. The critical moisture content was observed in the $40-55^{\circ}C$ range and increased with the temperature. The effective diffusivity of the starch increased as the drying temperature increased from 40 to $60^{\circ}C$. The modified Hii et al. model produced randomized residual plots, the highest $R^2$, and the lowest standard error of estimates. Conclusions: Drying time decreased linearly with an increase in the temperature, while the decrease in the moisture content was linear between $40-55^{\circ}C$. The constant drying rate phase occurred without any period of induction over a temperature range of $40-55^{\circ}C$ prior to the falling rate period, while drying at $60^{\circ}C$ took place only in the falling rate phase. The effective diffusivity had an Arrhenius relationship with the temperature. The modified Hii et al. model proved to be optimum for predicting the drying behavior of the starch in the tray dryer.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.1
• /
• pp.88-93
• /
• 2010

The principal objective of this study was to evaluate the physicochemical characteristics of brown rice Dasik prepared with different 5 levels(0, 25, 50, 75, 100%) of modified potato starch powder. We assessed the general compositions, Hunter's color values, the mechanical characteristics, and conducted a sensory evaluation analysis of brown rice Dasik at room temperature($20^{\circ}C$). The more modified potato starch powder composition was increased, the content of ash, protein and fat were significantly decreased(p<0.05). We noted that the luminance of samples were increased the more modified potato starch powder composition was increased, but in Hunter's a and b values were decreased. With regard to the mechanical properties of the Dasik samples, we noted significant differences in hardness, gumminess, chewiness but no differences in springiness, cohesiveness and adhesiveness were detected. The more modified potato starch powder composition was increased, the more the score of hardness, gumminess and chewiness were higher. The results of sensory evaluation showed that there were significant differences on the color, sweetness, mouth-feel, chewiness, overall quality of the Dasik samples(p<0.05). The score of brown rice Dasik with 50%(w/w) modified potato starch(BM2) in color, mouth-feel, chewiness, overall quality were significantly increased than those of other samples.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.97-103
• /
• 2010

The biodegradable oil absorption resin was prepared by the suspension polymerization of the modified starch and 2-ethylhexyl acrylate (2-EHA). The highest oil-absorption capacity of B-PEHA prepared showed at the condition of the modified starch content of 10 g and ethyleneglycol dimethacrylate (EGDMA) of 0.133 wt%. Its maximum oil absorption capacity per g of oil absorber was chloroform 30.88 g, toluene 19.75 g, xylene 18.78 g, tetrahydofuran (THF) 15.96 g, octane 11.43 g, hexane 9.5 g diesel oil 12.80 g, and kerosene 13.79 g, respectively. The biodegradation of poly-2-ethylhexylacrylate (B-PEHA) determined by enzymatic hydrolysis showed approximately 17~20%. The results showed that the preparation of the biodegradable oil absorption resin is available using the modified starch.