• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.295-301
• /
• 2000

The dynamic simulation of slider in hard disk drive is performed using Factored Implicit Finite Difference method. The modified Reynolds equation with Fukui and Kaneko model is employed as a governing equation. Equations of motion for the slider of three degrees of freedom are solved simultaneously with the modified Reynolds equation. The transient responses of the slider for disk step bumps and slider impulse forces are shown for various cases and are compared for the iteration algorithm and new algorithm.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제11권4호
• /
• pp.323-335
• /
• 2004

In this paper, we solve the general solution of a modified additive and quadratic functional equation f(χ + 3y) + 3f(χ-y) = f(χ-3y) + 3f(χ+y) in the class of functions between real vector spaces and obtain the Hyers-Ulam-Rassias stability problem for the equation in the sense of Gavruta.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제14권1호
• /
• pp.23-35
• /
• 2007

We investigate the modified Hyers-Ulam-Rassias stability for the following mixed type functional equation, i.e, cubic or quadratic type functional equation : 9f(x+y)-9f(x-y)+f(6y)=3f(x+3y)-3f(x-3y)+9f(2y).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권3호
• /
• pp.132-148
• /
• 2021

The modified F-expansion method is used to construct analytical solutions of the foam drainage equation with time- and space-fractional derivatives. The conformable derivatives are considered as spacial and temporal ones. As a result, some analytical exact solutions including kink, bright-dark soliton, periodic and rational solutions are obtained.

• 한국해안해양공학회지
• /
• 제18권4호
• /
• pp.360-371
• /
• 2006

천해역의 파랑을 추산하기 위한 포물형 근사식에 대해 기존 모형을 도출할 수 있는 일반화된 모형을 제시하고 이를 수정 완경사 파랑식에 대한 포물형 근사식으로 확장하였다. 제시한 수치모형을 Berkhoff et al.(1982)의 수리모형 실험과 비교하였으며 이 경우에는 기존 포물형 근사모형과 수정 포물형 근사모형의 결과가 거의 같으며 수리실험 결과와 아주 잘 일치하는 것으로 나타났다. 따라서 계산이 빠르고 안정성이 높은 기존 포물형 근사식은 천해역의 파랑 추산에 유용한 도구라 판단된다.

• 한국농공학회논문집
• /
• 제58권2호
• /
• pp.45-52
• /
• 2016

The object of this paper was to evaulate modified proposed design equation in model test result in order to estimate uplift-resistance of timber pile of reclaimed land greenhouse foundation. Uplift resistance result of model test was increased to according to increased of contact area. Uplift-resistance result of field test tend to lineary increased to according to increased of embedment depth and contact area. Results of field uplift-resistance was evaluate compare with modified proposed design equation results of model test and Effective stress method. As the Effective stress method tend to underestimate, modified proposed design equation results of model test tend to similar type. As the contact area increase, difference between field uplift-resistance results and modified proposed design equation results of model test was considered uplift-speed.

• 한국농공학회지
• /
• 제41권4호
• /
• pp.57-65
• /
• 1999

A modified gas tracer method was used to obtain reaeration coefficient from an artificial channel and a reach of Bokha stream, Ichon city. Propane was used as the tracer gas and Rhodamine-B dye as a dispersion and dulution tracer. Concentrations of propane in water sample were measured using a gas chromatograph and concentrationsof dye using UV-Spectrophotometer. To compare measured values with predicted values,commonly used 14 equations were selected . Results of this study suggested that the modified gas tracer method is a potentially useful procedure for th edetermination of reaeration cofficients. However, estimated reaeration coefficients from predictive equations were significantly different from that of this study. Therefore, when using predictive equations, careful selection of equation with consideration for hydraulic characteristics such as flow depth and average velocity, or use of newly derived predictive equation which is adequate for questioned stream would be needed.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1211-1218
• /
• 2018

Within the framework of the modified factorization method, we solve the $Schr{\ddot{o}}dinger$ equation with the modified Yukawa potential. The energy spectrum is obtained using the Pekeris approximation scheme for the centrifugal term. The thermodynamic properties, including the vibrational partition function, vibrational mean energy, vibrational mean free energy, vibrational specific heat capacity and vibrational entropy, are calculated. As a special case, we compare our result with that work of Dong [Int. J. Quant. Chem. 107, 366 (2007)] and find good agreement.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1152-1158
• /
• 2003

The mechanical behavior of a commercially pure titanium (CP-Ti) is investigated at high temperature Split Hopkinson Pressure Bar (SHPB) compression test with high strain-rate. Tests are performed over a temperature range from room temperature to 1000$^{\circ}C$ with interval of 200$^{\circ}C$ and a strain-rate range of 1900 ∼ 2000/sec. The true flow stress-true strain relations depending on temperature are achieved in these tests. For construction of constitutive equation from the true flow stress-true strain relation, parameters for the Johnson-Cook constitutive equation is determined. And the modified Johnson-Cook equation is used for investigation of behavior of flow stress in vicinity of recrystalization temperature. The Modified Johnson-Cook constitutive equation is more suitable in expressing the dynamic behavior of a CP-Ti at high temperature, i.e. about recrystalization temperature.

• 소성∙가공
• /
• 제17권7호
• /
• pp.528-533
• /
• 2008

Cavity in the mold is exposed to high pressure during injection molding operation. Injection molded articles with deep depth are often demanded as design variety increases. Subsequently mold becomes weak and deformation increases as the mold depth increases. Thus the injection molds for deep depth articles should be designed to hold out high pressure or stress concentration and large deformation. Through this study, equation for mold design was examined and suggested novel method to determine equation for mold design with deep depth. Novel equation developed in this study was modified from beam theory considering cantilever and two points bending situation while previous equation was modified from just cantilever bending situation. The validity of novel equation was verified through computer simulations for various mold side and wall thickness.