• The Journal of Korean Physical Therapy
• /
• v.22 no.6
• /
• pp.21-28
• /
• 2010

Purpose: The purpose of this study was to investigate the kinematic adaptation of head and trunk to ascend stairs and a ramp. Subjects were healthy young adults. Three-dimensional kinematic patterns of head and trunk movements were examined during stair climbing and steeper ramp climbing. Methods: Fourteen young subjects with no history of chronic or acute musculoskeletal, cardiovascular or respiratory disorders took part in this experiment. Kinematic data were collected using a 6 camera Vicon system (Oxford Metrix, Oxford, England). Repeated measures ANOVA analyses were used to investigate the effect of gait mode on kinematics of the head and trunk. Results: The angle of the trunk while ascending stairs or a ramp was modified in three human planes (p<0.05). The angle of head and neck during the ascending of stairs or a ramp was not changed in the sagittal plane but was changed in the frontal and transverse planes (p<0.05). Conclusion: This study describes and discusses some basic kinematic mechanisms underlying the pattern of head and trunk changes during stair and ramp climbing and showed that postural adaptation of the head and trunk is necessary to maintain balance.

• Journal of Korean Academy of Nursing
• /
• v.25 no.4
• /
• pp.751-773
• /
• 1995

We, clinical nurse specialists practising and guiding student practice in a Community health nursing clinic, wanted to develop a family pattern appraisal consistent with Rogers' conceptual system, the nursing model guiding our practice. We use Rogers' model because it is harmonious with the traditional Korean view of the one human, natural and cosmic world. The purpose of our research was to contribute to science - based nursing practice, not only, one helpful model, but also a model of how to use, in guiding practice, a conceptual system which reflects nurse practitioners' philosophy of nursing, is intellectually satisfying, and enriches meaning in daily nursing life. The research objectives were to review the literature on Rogers' model and analyse it according to Kim's five - level analytical framework, to explore Rogers' definition of family, to review appraisals based on Rogers' model, and to develop a family appraisal which is culturally appropriate for use in our community. This work including the use of the appraisal and its refinement with families in our practice which was done during 1994 and 1995, in Seoul, in the Capital of the Republic of Korea. At the highest level of analysis, Rogers conceptual system emphasizes acausality and multidimentional meaning ; the world view is characterized by process, movement and wholeness. The epistemology Is one of holism and the knowledge base includes all forms of experience, from sensory to mystical, objective, and subjective. At the metaparadigm level, nursing focuses on the unitary human being and the environment. At the level of nursing philosophy, the model identifies human being, nursing, nurse, and illness and health. At the paradigm level the model assumes the irriducibility of the human to parts, noncausality and continual change. Rogers' practice methodology consists of pattern manifestation appraisal and deliberative mutual patterning. Under-standing patterns and patterning of people is the key to helping them achieve their potential. At the theory level, the basic assumptions, key concepts, and homeodynamic principles were identified. Rogers states the family energy field is an undividable, four-dimensional negentropic energy field which is in a larger envircinmental field show-ing such characteristics as cannot be predicted by knowledge of individual family members. Based on the word of Rogers scholars, we chose Rogers' correlates of patterning to understand the family unit as a whole-frequency, rhythms, motion, time perception, sleeping-waking beyond waking, pragmatic -imaginative-visionary to develop the appraisal. We, also used some of Barrel's (1988) criteria including interpersonal network and professional health care access and use, and Cordon's (1982) criteria including self perception - self concept modified to fit the family. Our family Pattern appraisal included 1. Influencirg data, 2. Professional health care access and use, 3. Family self perception-self concept, 4. Family interpersonal network, 5. Sleep-wake-be-yond waking, 6. Pragmatic-imaginary-visionary, 7. Family frequency and rhythm, 8. Family motion, 9. Family time perception. The appraisal was used with four families and modified to eliminate overlap and to make it possible for the family member to express themselves more easily. We plan to gain more experience with the appraisal toward further development of the tool.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.157-175
• /
• 2014

This study aimed to develop appropriate jeans patterns for men in their twenties. The study discovered designs and materials that were most commonly used by investigating preferred jeans brands for men in their twenties, and among them three brands were selected. The study carried out a fitting assessment aimed at research subjects who had the average body type of men in their twenties and who wore jeans of the selected brands. Then, the study designed research patterns by taking as a basic pattern the patterns of the company who received the highest score and modifying any part that revealed a problem. After making the research jeans in twice, a fitting adequacy assessment was undertaken in order to identify any difference between the existing jeans and the research jeans. As a result of the appearance assessment, the problems shown in appearance overall was confirmed to be improved as it received a higher assessment compared with the existing jeans overall. As a result of the fitting assessment, the study collected the assessment results of waist measurement, hip circumference, thigh circumference, and fit of back central line laid slope ease. Based on the result, the study confirmed the parts to be modified and proposed slim fit jeans patterns in consideration of the body type characteristics of men in their twenties.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.1
• /
• pp.5-11
• /
• 2001

Objectives and Importance : The present study investigated the levels of basic fibroblast growth factor(bFGF) in the CSF of patients with moyamoya disease and its clinical significance. Methods : The levels of bFGF in CSF, taken from 26 hemispheres of 14 moyamoya patients and 20 patients without vascular anomaly(control group), were measured by an enzyme-linked immunosorbent assay. We analyzed the correlation between the level of bFGF and the clinical factors such as age, onset pattern, development of neovascularization, and cerebral circulation. Results : The CSF of moyamoya patients contained a high concentration of bFGF to a significant extent. The bFGF level was apparently elevated in the patients in whom neovascularization from indirect revascularization, such as modified encephalo-duro-arterio-synangiosis(EDAS) was well developed. A linear correlation between the values of bFGF and clinical progression was noted. Conclusions : The elevation of bFGF in moyamoya disease seems to be specific. Clinically, the bFGF level may be considered a useful indicator to predict the efficacy of indirect revascularization.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.647-661
• /
• 1997

The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it has been developed for luting of fixed restorations. To evaluate the bond strength and marginal leakage of RMGICs for luting usage, the 80 extracted human molars which had uniform area of exposed dentin were cemented with 3 types of RMGICs(Fuji Duet, Advance, Vitremer), a conventional Glass Ionomer Cement(GIC-Fuji I), and a resin cement (Panavia 21) to base metal alloy(Ni-Cr-Be). After thermocycling the specimens were immersed in basic fuschin dye for measuring marginal leakage. The shear bond strength was measured with Instron and the maximum dye penetration was measured to 0.1mm. The types of fractured patterns were determined with stereoscope(${\times}7.5$). The results are as follows. 1. The difference between 3 RMGICs and a conventional GIC in shear bond strength was not statistically significant. It seemed that RMGICs had lower shear bond strength than resin cement. (p<0.01) 2. The mean scores of marginal leakage had no significant difference between the resin cement and 3 RMGICs but it was much higher in conventional GIC than the RMGICs (p<0.05) 3. It was determined that the manufacturer and the methods of dentin pretreatment determined the pattern of fracture surfaces and the frequency of adhesive failure between teeth and 3 RMGICs standed as in following order - Vitremer, Advance, Fuji Duet. (p<0. 01) When the fracture pattern was analyzed, it could be said that the materials and the method of dentin pretreatment have much effect on bonding states. This means that the dentin bonding agents should be improved. But the limited products in this experiment can not evaluate the physical properties of the entire RMGICs. Therefore a further study which can evaluate various RMGICs should be in progress to develope better cements.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.2
• /
• pp.31-46
• /
• 2018

This study was carried out to offer basic data that can be used for outdoor wear production for active senior males, emerging as a new consumer bracket in the era of rapid aging. To this end, this study modified and complemented the patterns of outdoor jackets for active senior males based on existing outdoor jackets that received the most excellent evaluation. On the basis of the research outdoor wear wearing assessment results, this study confirmed those areas to be modified and proposed areas to be considered in manufacturing outdoor wear for this demographic. As a result of existing outdoor wear's wearing assessment, the jacket of brand B was shown to be the most excellent one. This study actually designed research outdoor wear patterns by modifying the problematic parts through the addition and subtraction of spare length or circumference in the sections where fit satisfaction was low by referring to the selected brands' patterns. The research outdoor wear was designed by referring to the preferred outdoor types and colors that were highlighted in the previous survey result of consumer wearing reality, based on the designs of the outdoor wear receiving the most excellent assessment in wearing assessment. Fabric that specially glued two-layered mesh that bonded the thin membrane of synthetic resin with polyester fabric was used as the material in this study. Wearing assessment was conducted by comparing the manufactured research outdoor wear and the existing outdoor wear selected as excellently assessed outdoor wear. Consequently, this study verified that the wearing fit of the research outdoor wear was more excellent in most items. This study proposed final patterns for outdoor jackets suitable for active senior males through the modification of several items that required improvements as per the wearing assessment of the research outdoor wear.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.709-714
• /
• 2014

Protein tyrosine nitration is considered as an important indicator of nitrosative stresses and as one of the main factors for pathogenesis of inflammation and neuronal degeneration. In this study, we investigated various nitrosative modifications of bovine carbonic anhydrase II (CAII) through qualitative and semi-quantitative analysis using the combined strategy of Fourier transformation ion cyclotron resonance mass spectrometry (FT-ICR MS) and ion-trap tandem mass spectrometry (IT-MS/MS). FT-ICR MS and its spectra were used for the search of the pattern of nitrosative modifications. Identification of nitrosatively modified tyrosine sites were executed through IT-MS/MS. In addition, we also tried to infer the reason for the site-specific nitrosative modifications in CAII. In view of the above purpose, we have explored- i) the side chain accessibility, ii) the electrostatic environment originated from the acidic/basic amino acid residues neighboring to the nitrosatively modified site and iii) the existence of competing amino acid residues for nitration.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.255-261
• /
• 2016

Objectives: This study aimed to analyze the mineral composition of naturally- and artificially-produced caries-affected root dentin and to determine the elemental incorporation of resin-modified glass ionomer (RMGI) into the demineralized dentin. Materials and Methods: Box-formed cavities were prepared on buccal and lingual root surfaces of sound human premolars (n = 15). One cavity was exposed to a microbial caries model using a strain of Streptococcus mutans. The other cavity was subjected to a chemical model under pH cycling. Premolars and molars with root surface caries were used as a natural caries model (n = 15). Outer caries lesion was removed using a carbide bur and a hand excavator under a dyeing technique and restored with RMGI (FujiII LC, GC Corp.). The weight percentages of calcium (Ca), phosphate (P), and strontium (Sr) and the widths of demineralized dentin were determined by electron probe microanalysis and compared among the groups using ANOVA and Tukey test (p < 0.05). Results: There was a pattern of demineralization in all models, as visualized with scanning electron microscopy. Artificial models induced greater losses of Ca and P and larger widths of demineralized dentin than did a natural caries model (p < 0.05). Sr was diffused into the demineralized dentin layer from RMGI. Conclusions: Both microbial and chemical caries models produced similar patterns of mineral composition on the caries-affected dentin. However, the artificial lesions had a relatively larger extent of demineralization than did the natural lesions. RMGI was incorporated into the superficial layer of the caries-affected dentin.

• The Research Journal of the Costume Culture
• /
• v.5 no.4
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.1
• /
• pp.43-48
• /
• 2013

Adaboost is widely used for Haar-like feature boosting algorithm in Face Detection. It shows very effective performance on single distribution model. But when detecting front and side face images at same time, Adaboost shows it's limitation on multiple distribution data because it uses linear combination of basic classifier. This paper suggest the HDCT, modified decision tree algorithm for Haar-like features. We still tested the performance of HDCT compared with Adaboost on multiple distributed image recognition.