This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of $240^{\circ}C$ and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.
폴리프로필렌(PP)과 에틸렌-프로필렌-디엔 고무(EPDM)의 양쪽 성분에 특정 상호 작용기도입에 의한 상용성 향상효과를 연구하였다. PP는 무수말레인산으로 그래프트시켰고(PP-g-MAH), 다른 한 성분으로는 황산화 EPDM 이오노머(ZnSEPDM)를 사용하였다. 브라벤더 혼합기를 이용하여 $200^{\circ}C$에서 블렌딩을 행하였다. 상용성은 FTIR분광기로 분석하였고 또한, 동적기계적 물성으로 분석하였다. FTIR결과 PP-g-MAH 의 카보닐기는 단파장 쪽으로 이동하고, ZnSEPDM의 슬폰기는 장파장쪽으로 이동하는 것을 알 수 있었다. ZnSEPDM의 유리전이온도는 그 조성이 70wt.%까지는 증가하다가 70wt.%이상에서 감소하였다. FTIR 스펙트라와 유리전이온도 결과로부터 특정상호작용, 즉 쌍극자-이온 상호작용에 의해 PP-EPDM 사이의 상용성이 증가하는 것을 알 수 있었다.
프로필렌의 플라즈마 처리로 목분을 표면 개질하여 복합재 기지인 PP와 상용성을 가지게 하였다. 프로필렌을 플라즈마로 처리하여 증착된 소수성 박막 필름의 화학적 구조는 PP와 흡사하였다. 목분과 PP는 이축 압출기에 의해 펠렛으로 만들어 졌고 50 wt% wood powder/PP 복합재료는 사출 성형기에 의해 성형되었다. 인장강도와 굴곡 강도는 최고 7.59% and 12.43%까지 향상되었으며 파단면에 대한 SEM 관찰로 플라즈마 중합이 계면 접착력과 기계적 특성을 향상시킨 것을 볼 수 있었다.
본 연구에서는 polypropylene (PP)을 기본 고분자로 하여, 석유수지(hydrocarbon resin, HCR) 종류와 함량을 달리하여PP/HCR 블랜드의 열량 거동을 분석하였고, 이를 이용하여 bi-axially oriented polypropylene (BOPP) 필름을 제조한 후 필름의 기계적 물성, 광학적 특성, 가스 및 수증기에 대한 투과도 그리고 수축률을 비교 평가하였다. 이 연구에서 HCR로는 수첨 dicyclopentadiene (DCPD) 수지와 수첨 C9 수지가 사용되었다. Homo-PP 대비 PP/HCR 블랜드는 stiffness의 증가 등 필름의 기계적 물성 증가, 필름의 haze 감소 등의 광학적 특성 향상, 가스 및 수증기에 대한 투과도 감소 그리고 필름의 수축률이 증가되었으며, HCR로 사용된 수첨DCPD수지와 수첨 C9수지는 기계적 물성 및 광학적 물성에서는 유사한 기여도를 보이지만, 가스 및 수증기에 대한 투과도와 필름의 수축률에 있어서는 차이를 보였다.
알루미늄 생산의 폐기물로 나오는 적니를 플라스틱의 Filler로서 재활용하기 위한 연구를 수행하였다. 여러가지 플라스틱에 적니를 첨가하여 본 결과 고밀도폴리에틸렌(HDPE), 저밀도 폴리에틸렌(LDPE) 및 폴리프로필렌(PP)에 적니가 Filler로서 사용 가능한 것으로 나타났다. 적니가 플라스틱에 첨가됨에 따라 플라스틱은 다른 안료의 첨가 없이도 붉은 고동색을 나타내었고 인장탄성율 등은 증가하였으나 내충격 강도가 저하되었다. 이를 방지하기 위한 첨가제가 연구되었는데 HDPE에는 에틸렌비닐알코올(EVA)을 첨가제로 5%정도 첨가하는 것이 효과적인 것으로 나타났다. PP의 경우에는 Maleic anhydride 변성 PP를 첨가하면 내충격강도의 저하가 축소되었다. LDPE, HDPE, PP, 폴리스티렌 및 ABS가 섞여있는 혼합 폐플라스틱에 대해서도 적니가 Filler로서 사용 가능한 것으로 나타났는데 이때는 성분간의 비상용성으로 인하여 기계적 물성이 매우 낮았다. 역시 첨가제로서 에틸렌프로필렌 고무(EPR) 및 스티렌부타디엔 블록공중합체(SBS)를 혼합할 경우 좋은 물성을 가지는 적니 혼합 플라스틱을 얻을 수 있었다.
동물세포배양을 위한 생물반응기내의 산소전달을 증가시키기 위하여 과불소탄소화물의 한 종류인 $Flutec^R$ pp11을 수정된 $Celligem^{TM}$ 생물반응기내에서 사용하였다. 또한, pp11이 하이브리도마 세포성장과 모노클로날 항체 생산에 미치는 영향을 조사하였으나 pp11의 나쁜 영향을 찾아볼 수 없었다.
한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
/
pp.291-291
/
2006
Two different sources of clay, Na-Bentonite (Thai local clay) and Na-Montmorillonite were modified with Hexadodeccyltrimethyl ammonium bromide. The nanocomposites of polypropylene were successfully prepared via melt blending in a co-rotating twin screw extruder by using PP-g-MA as a compatibilizer at various contents of organoclays. The morphology of nanocomposites was investigated by using XRD and SEM. The results showed that the intercalated and exfoliated structures were obtained. The thermal behavior was also studied by using DSC and TGA. The degradation temperature of filled PP was greater than that of unfilled PP by 20%. And, the tensile strength and modulus were improved when a small amount of organoclays were added.
The hydrophobic ligand-containing hollow polypropylene (PP) membranes were synthesized by the mutual radiation induced graft copolymerization with glycidylmethacrylate (GMA) onto hollow PP membrane followed by the subsequent functionalization with L-phenylalanine. FT-IR, elemental analysis and UV spectroscopy were utilized to characterize copolymer composition, and degree of grafting, functionalization conversion and ${\gamma}$-globulins adsorption. The degree of grafting on the PP surface increased with the reaction time and total dose of E-beam. In the subsquent functionalization, the amount of L-phenylalanine increased with the increase in the degree of grafting and the degree of conversion was about 30%. The ${\gamma}$-globulins adsorption experiments showed that adsorption capacity had a maximum value at pH 8. The ${\gamma}$-globulins adsorption capacity in the basic pH region was higher than in the acidic pH region.
Isotactic polypropylene (PP) surfaces were modified with argon and oxygen plasmas using a radiofrequency (RF) glow discharge at 240 mTorr and 40 W. The changes in topography and surface structure were investigated by atomic force microscopy (AFM) in conjunction with specular reflectance of infrared (IR) microspectroscopy. Under our operating conditions, the AFM image analysis revealed that longer plasma treatment resulted in significant ablation on the PP surface, regardless of the kind of plasma employed, but the topography was dependent on the nature of the gases. Specular reflectance IR spectroscopic analysis indicated that the constant removal of surface material was an important ablative aspect when using either plasma, but the nature of the ablative behavior and the resultant aging effects were clearly dependent on the choice of plasma. The use of argon plasma resulted in a negligible aging effect; in contrast, the use of oxygen plasma caused a noticeable aging effect, which was due to reactions of trapped or isolated radicals with oxygen in air, and was partly responsible for the increased surface area caused by ablation. The use of oxygen plasma is believed to be an advantageous approach to modifying polymeric materials with functionalized surfaces, e.g., for surface grafting of unsaturated monomers and incorporating oxygen-containing groups onto PP.
자동차의 경량화를 위해서 AA5182/Polypropylene/AA5182 형태의 알루미늄 합금과 폴리프로필렌으로 구성된 샌드위치 판재가 개발되었다. 샌드위치 판재의 성형성을 평가하기 위해서 0.2mm 두께의 AA5182 판재와 1.2mm 두께의 샌드위치 판재의 성형한계도를 수정된 Marciniak-Kuczynski(M-K) 이론에 의해서 구하였다. 판재의 이방성을 표현하기 위해서 Hill의 1948년 항복곡선 표현 식을 사용하였다. 그 결과 샌드위치 판재의 성형한계도가 AA5182판재보다 더 우수하게 평가되었으며 이것은 실험값과 잘 일치하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.