• 전기학회논문지
• /
• 제57권6호
• /
• pp.985-993
• /
• 2008

This paper proposes a new DFIG(Doubly-Fed Induction Generator) system using matrix converter, which is very effectively used for interconnecting the wind power system to the power grid. The operation of proposed system was verified by computer simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was conformed by experimental works with a laboratory scaled-model of wind power system. The laboratory scaled-model was built using a motor-generator set with vector drive system, and a matrix converter with DSP(Digital Signal Processor). The operation of scaled-model was tested by modeling the specific variable-speed wind turbine using the real wind data in order to make the scaled-model simulate the real wind power system as close as possible. The simulation and experimental results confirm that matrix converter can be applied for the DFIG system.

• 디지털콘텐츠학회 논문지
• /
• 제9권4호
• /
• pp.785-790
• /
• 2008

디지털 캐로절은 사용자들에게 미디어 동기화 메카니즘을 통하여 미디어 객체 공유를 가능하게 한다. 본 시스템은 공동 작업에 참여한 사용자들이 다른 참여자들에게 같은 뷰로써 공유된 미디어 또는 오류 객체들을 참조할 수 있도록 구축한다. 본 논문에서는 결함 허용을 통하여 신뢰성을 향상시키는 방법에 대해서 기술한다. ER은 분산 멀티미디어에서 하나의 소프트웨어 오류를 자동적으로 복구할 수 있는 시스템이다. 본 논문은 규칙-기반 DEVS(Discrete Event System Specification) 모델링과 시뮬레이션 기법을 사용하면서 분산 멀티미디어 상에서의 오류 복구 시스템의 성능 분석을 설명한다. DEVS에서 하나의 시스템은 시간, 입력, 상태, 출력 및 함수들을 가지고 있다.

• 한국BIM학회 논문집
• /
• 제9권1호
• /
• pp.42-51
• /
• 2019

Maintenance of aging structures has attracted societal attention. Maintenance of the aging structure can be efficiently performed with a digital twin. In order to maintain the structure based on the digital twin, it is required to accurately detect the damage of the structure. Meanwhile, deep learning-based damage detection approaches have shown good performance for detecting damage of structures. However, in order to develop such deep learning-based damage detection approaches, it is necessary to use a large number of data before and after damage, but there is a problem that the amount of data before and after the damage is unbalanced in reality. In order to solve this problem, this study proposed a method based on Generative adversarial network, one of Generative Model, for generating acceleration data usually used for damage detection approaches. As results, it is confirmed that the acceleration data generated by the GAN has a very similar pattern to the acceleration generated by the simulation with structural analysis software. These results show that not only the pattern of the macroscopic data but also the frequency domain of the acceleration data can be reproduced. Therefore, these findings show that the GAN model can analyze complex acceleration data on its own, and it is thought that this data can help training of the deep learning-based damage detection approaches.

• 대한산업공학회지
• /
• 제39권6호
• /
• pp.486-497
• /
• 2013

In this paper, we first present an in-depth survey of the research on Verification, Validation and Accreditation (VV&A) applied in various areas. Then we introduce the characteristics of the military and defense Modeling and Simulation (M&S) and propose the direction of method for VV&A with the identified characteristics. The M&S has been widely used in many different applications in the military and defense area including training, analysis, and acquisition. Methods and processes of VV&A have been proposed by researchers and M&S practitioners to guarantee the correctness of the M&S. The idea of applying the formal credibility assessment in VV&A is originated from the Software Engineering Reliability Test and Systems Engineering Development Process. However, the current VV&A techniques and processes proposed in the research community have not utilized the military-and-defense specific characteristics. We identify the characteristics and issues that can be found in the military and defense M&S. Then propose the direction of techniques and methods for VV&A considering the characteristics and issues. Also, possible research direction on the development of VV&A is proposed.

• 한국항공우주학회지
• /
• 제50권12호
• /
• pp.857-866
• /
• 2022

고정익 UAV는 다른 항공기 플랫폼보다 항속거리와 항속시간에서 큰 이점을 가진다. 이러한 이유로 군에서 정찰용으로 많이 사용된다. 본 연구에서는 랜딩기어를 포함한 고정익 UAV의 모델링을 실시하고, 비행조종컴퓨터에 사용될 유도 및 제어기 설계 및 HILS 환경 구축을 실시하였다. 또한 이륙, 순항, 착륙의 모든 과정을 자동으로 수행하는 오토파일럿 시스템을 제작하였다. 연구에 사용한 고정익 UAV를 Datcom 및 AVL 공력해석 소프트웨어를 사용하여 공력계수를 추출하고 6자유도 모델링을 실시하였다. 비행조종컴퓨터는 항공기의 16개의 비행모드를 분별하여 Carrot Chasing 기반 유도 명령을 생성하는 유도기와 Nonlinear Dynamic Inversion 기법을 사용한 제어기로 구성되어있다. SIMULINK를 사용하여 구현된 모델링과 비행조종컴퓨터는 RTNgine을 사용하여 HILS 환경을 제작하여 고정익 UAV의 통합 시뮬레이션 환경을 제작하였다.

• 한국지열·수열에너지학회논문집
• /
• 제18권4호
• /
• pp.45-57
• /
• 2022

The Ministry of National Defense of the Republic of Korea is showing a lot of interest in net zero-energy buildings (NZEBs) to reduce energy consumption of military facilities and to promote green growth policy in military sector. The application of building passive technologies and renewable energies is essential to achieving NZEBs. This paper analyzed energy performance and energy cost on the conventional heating and cooling system (baseline scenario) and three different alternative scenarios (ALT 1, ALT 2 and ALT 3) applied in a hypothetical military building. A building modeling and simulation software (DesignBuilder V6.1) with EnergyPlus calculation engine was used to calculate the energy consumption for each scenario. Overall, when the GSHPs are applied to both space airconditioning and domestic hot water (DHW) production, Alt-2 and Alt-3, the amount of energy consumption for target building can be greatly reduced. In addition, when the building envelope performance is increased like Alt-3, the energy consumption can be further reduced. The annual energy cost analysis showed that the baseline was approximately 161 million KRW, while Alt-3 was approximately 33 million KRW. Therefore, it was analyzed that the initial construction cost increase could be recovered within about 6.7 years for ALT 3. The results of this study can help decision-makers to determine the optimal strategy for implementing GSHP systems in military buildings through energy performance and initial construction cost assessment.

• 한국태양에너지학회 논문집
• /
• 제22권3호
• /
• pp.47-56
• /
• 2002

The office is an excellent candidate for implementing daylighting techniques because of the relatively high electric lighting power densities and long daytime use pattern. The quantity of light available for a space can be translated in term of the amount of energy savings through a process of a building energy simulation. To get significant energy savings in general illumination, the electric lighting system must be incorporated with a daylight - activated dimmer control. A prototype configuration of an office interior has been established and the integration between the building envelope and lighting and HVAC systems is evaluated based on computer modeling of a lighting control facility. First of all, an energy-efficient luminaire system is designed for both a totally open-plan office interior and a partitioned office. A lighting design and analysis program, Lumen-Micro 2000 predicts the optimal layout of a conventional fluorescent lighting fixture to meet the designed lighting level and calculates unit power density, which translates the demanded amount of electric lighting energy. A dimming control system integrated with the contribution of daylighting has been applied to the operating of the artificial lighting. Annual cooling load due to lighting and the projecting saving amount of cooling load due to daylighting under overcast diffuse sky are evaluated by a computer software, ENER-Win. In brief, the results from building energy simulation with measured daylight illumination levels and the performance of lighting control system indicate that daylighting can save over 70 percent of the required energy for general illumination in the perimeter zones through the year. A 25 % of electric energy for cooling may be saved by dimming and turning off the luminaires in the perimeter zones.

• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.286-290
• /
• 2011

유비쿼터스 시대의 핵심 기술인 위치기반기술은 GNSS(Global Navigation Satellite System)를 활용한 기술이다. GNSS는 미국의 GPS, 유럽의 Galileo, 일본의 QZSS, 중국의 Compass, 인도 IRNSS 등을 일컬으며, 국내에서도 다각도의 연구가 계속되고 있다. 이러한 위성항법시스템은 우주 상공에 설치가 되고 나면 위성을 다시 내릴 수 없기 때문에 기능에 대한 수정 및 검증 등의 관리적 측면에서 어려움이 있다. 이에 위성을 올리기 전에 정확하고 구체적인 성능 검증 및 동작 검증 등이 반드시 필요하다. 이를 위해 하드웨어 테스트베드가 구축되기도 하지만 소프트웨어로 성능 및 동작에 대한 시뮬레이션이 수행된다면 비용 및 유연성 부분에서 더 많은 장점을 가질 수 있다. 이런 시뮬레이터들의 가장 핵심은 이론적 위성 신호의 전달과정에 신호가 지상의 수신기에 도달하는 동안 다양한 오류 요소들을 적용해야 하는 것이다. 이에 본 논문에서는 여러 위성군을 대상으로 위성으로부터 지상의 수신기까지 위성 선호가 전파되면서 적용될 수 있는 다양한 오류 요소들을 모델링하여 적용한 결과를 윈도우 기반의 시뮬레이터 설계와 구현 결과로 제시한다.

• Ocean Systems Engineering
• /
• 제7권2호
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.617-627
• /
• 2022

Military training is an essential item for the fundamental problem of war. However, there has always been a problem that many resources are consumed, causing spatial and environmental pollution. The concepts of defense modeling and simulation and CGF(Computer Generated Force) using computer technology began to appear to improve this problem. The Naval Operations, Resources Analysis Model(NORAM) developed by the Republic of Korea Navy is also a DEVS(Discrete Event Simulation)-based naval virtual force analysis model. The current NORAM is a battle experiment conducted by an operator, and parameter values such as maneuver and armament operation for individual objects for each situation are evaluated. In spite of our research conducted evolutionary, supervised, reinforcement learning, in this paper, we introduce our design of a scenario creation model based on evolutionary learning using genetic algorithms. For verification, the NORAM is loaded with our model to analyze wartime engagements. Human-level tactical scenario creation capability is secured by automatically generating enemy tactical scenarios for human-designed Blue Army tactical scenarios.