• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.311-314
• /
• 1995

Biped locomotion can be simply modeled as a linear inverted pendulum mode. This model considers only the CG (center of gravity) of the entire system. But in real biped robot systems, the free-leg motion dynamics is not negligible. So if its dynamics is not considered in designing the reference CG motion, it is badly influence to the ZMP(zero moment point) position of the biped robot walking in the sagittal plane. Therefore, we modeled the biped locomotion similar to the linear inverted pendulum mode but considered the predetermined free-leg dynamics. To verify that the proposed biped locomotion is more stable than the linear inverted pendulum mode, we constructed a biped robot simulator and designed a serco controller to track both the reference motion of the free leg and the reference motion of CG of the biped robot using the computed torque control low. And through simulations, we verified that the proposed walking is better in stability than the one based on the linear inverted pendulum mode.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.104-109
• /
• 2006

In this study, the equivalent plate model is developed using a finite element method(FEM) based on the first order shear deformation theory(FSDT). The substructure synthesis method is used to consider the control surface. For the verification of the equivalent model, the results of free vibration analysis are compared with the ones of 3D wing structure modeled by using the MSC/NASTRAN.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.145-151
• /
• 2001

An extension of interaction matrix formulation to the problem of system and disturbance identification for a plant that is corrupter by both process and output disturbances is presented. With only an assumed upper bound on the order of the system and an assumed upper bound on the number of disturbance frequencies, it is shown that both the disturbance-free model and disturbance effect can be recovered exactly from disturbance-corrupted input-output data without direct measurement of the periodic disturbances. The rich information returned by the identification can be used by a performance-oriented model-based loaming or repetitive control system to eliminate unwanted periodic disturbances.

• 한국측량학회지
• /
• 제29권3호
• /
• pp.249-255
• /
• 2011

고중복도 비디오카메라 영상을 이용하여 GPS/INS 및 지상기준점 자료 없이 제작되는 자유 입체 모자이크 영상은 기준 프레임 영상의 3차원 모델좌표계로 표현되는 상호표정요소를 이용하여 제작될 수 있다. 이와같이 제작된 자유 입체 모자이크 영상으로부터 결정되는 3차원 좌표는 3차원 모델좌표계로 나타내게 된다. 따라서 자유 입체 모자이크 영상을 이용하여 절대좌표를 결정하기 위해서는 모델좌표계를 절대좌표계로 변환하기 위한 방법이 필요하다. 일반적으로 서로 다른 두 개의 3차원 직각 좌표계간의 좌표변환은 3차원 상사변환(similarity transformation)이 사용된다. 하지만 자유 입체 모자이크 영상의 3차원 모델좌표는 원점으로부터 떨어질수록 오차가 누적되어 선형변환을 이용한 좌표변환을 수행하기 어렵다. 따라서 이러한 자유 입체 모자이크 영상의 모델좌표를 절대좌표로 변환하기 위한 3차원 비선형 변환 방법이 필요하다. 또한 절대좌표계로 표현된 수치지도와 입체 모자이크 영상을 중첩하여 사용하기 위해서는 자유 입체 모자이크 영상을 실좌표 입체 모자이크 영상으로 변환하기 위한 방법이 필요하다. 따라서 본 연구에서는 자유 입체 모자이크 영상의 3차원 모델좌표를 3차원 절대좌표로 변환하기 위한 3차원 비선형 변환 방법과 이 방법을 기반으로 자유 입체 모자이크 영상을 실좌표 입체 모자이크 영상으로 제작하기 위한 2차원 비선형 변환방법을 제안하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.109-129
• /
• 1995

Many patients with malignancies of the head and neck undergo radiation therapy, either as the only method of treatment or in combination with surgery. Radiation therapy has great effect in the case of fairly advanced malignancies which can't be operated radically. But the complication of radiation therapy arise because of damage to the peri- and operated area. It is fully known that irradiated tissue shows retarded healing process in the skin, mucosa and especially vascuslar tissue. The purpose of this study was to observe the healing process of irradiated free or island flap after operation. As Experimental Models, Femoral arterial and venous anastomosis (Group 1), Epigastric-island flap (Group 2) and free Epigastric falp(Group 3) with irradiated postoperative 24 hrs were made on 30 rats/group. As Control Model(Group 4), Free Epigastric flap was not irradiated after operation was chosen on 30 rats. The amount of irradiation was single fraction of 20 Gy using as linear megavoltage accelerator. Difference between Experimental and Control group was evaluated by the method of clinical examination, histopatholoical findings, biochemical analysis and DNA activity at postoperative 1, 3, 7, 14 and 28 days. The results were as follows, 1. Skin color and new epithelization in group 2 and 3 was similar to control group clinically. 2. Postoperarive patency of femoral artery and vien showed 5% and 22% of ischemity. 3. The externa, media and intima of irradiated femoral artery and vein were similar to control group histopathlogically. 4. Granulation and collagen tissue accumulation of irradiated groups were more active due to degenerative and fibrotic changes than control group at postoperative 7 days histopathologically. 5. The hydroxyproline content of all experimental groups were reduced till 14 days and the group 2 was most prominent at postoperative 7 and 28 days(p<0.05). 6. DNA activities of all groups were reduced till 3 days, but begun to recover at 7 days and more activities in control group than irradiated group(p<0.05). Based on the above results, the clinical healing process of free flaps with irradiated postoperative 24 hrs little difference from control group without complications.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.74-80
• /
• 2011

Front-back vibrations of high-speed elevator need to be suppressed as in the case of lateral vibrations. The dynamic model for the front-back vibrations is different from the lateral vibration model since the supporting structure varies. In this study, a dynamic model was derived using the energy method. Based on the free vibration analysis, it was observed that the fundamental frequency for the front-back vibration is slightly lower than the fundamental frequency of the lateral vibration, which means that the active vibration control should be carried out in both directions. The PPF control algorithm was applied to the numerical model under measured rail irregularities. The numerical results show that the active vibration control of elevator front-back vibration is also possible.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.152-157
• /
• 2000

In the control of CNC machine tools, it is significant for precise machining to reduce the contour error. The object of servo-control is reduction of contour error and tracking error. In past studies, there were two approaches to control a servo-system. One was to eliminate axial tracking errors, and the other was to control contour errors. The Cross-coupled controller(CCC) was introduced fro ma veiwpoint of contour error model. Recently, for machining part with free form surfaces, we propose a new contour error model based on curve interpolator. It is presented here that performance of CCC using proposed model is enhanced. Therefore, we can make more precise parts with the curve interpolator and the new contour error model.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.58-65
• /
• 1999

A magnetic levitation system requires a robustness to overcome a dynamic instability due to disturbances. In this paper a robust controller for a magnetically levitated fine manipulator is presented. The proposed controller consists of following two parts: a model reference controller and an $H_{\infty}$ controller. First, the model reference control stabilizes the motion of the manipulator. Then, the motion of the manipulator follows that of the reference model. Second, the $H_{\infty}$ control minimizes errors generated from the model reference control due to noise and disturbance since the $H_{\infty}$ control is a kind of robust control. The experiments of position control and tracking control are carried out by use of the proposed controller under the conditions of free disturbances and forced disturbances. Also, the experiments using PID controller are carried out under the same conditions. The results from above two controllers are compared to investigate the control performances. As the results, it is observed that the proposed controller has similar position accuracy but better tracking performances comparing to the PID controller as well as good disturbance rejection effect due to the robust characteristics of the controller. In conclusion. it is verified that the proposed controller has the simple control structure, the good tracking performances and good disturbance rejection effect due to the robust characteristics of the controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.36-41
• /
• 1993

The adiabatic slirn-type autoclave reactor for free radical polymerization of LDPE is represented by a two-compartment four-cell model, which is proven effective to predict the reactor behavior as well as the polymer properties. Since the temperature distribution along the reactor axis plays the central role for the properties of the polymer product, it is important in practice to regulate the temperature in each compartment. The present study aims for the application of the adaptive control algorithm not only in the period of start-up but also during the steady state operation. It is shown that the temperature control is significantly improved over the conventional PID-control and this also brings about a reduction of variations in the polymer properties. This study demonstrates the potential application of the adaptive controller for the control of the polymerization reactor operated under the adiabatic condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1003-1006
• /
• 2002

In machining free-form curves with a machine tool equipped with parallel device, improving contouring accuracy is very important. In this paper, we present contouring control algorithm far parallel machine tool. The relation between the error in Joint space and the error in catesian space is evaluated, and we estimate contouring error vector which efficiently determines the variable gains for the cross coupled control. To show the validity of the algorithm, the contouring control is simulated for free form contour trajectory in cubic parallel machine tool model.