• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.300-307
• /
• 2002

Damage estimation methods are classified into two groups according to the dependence on the FE model : signal-based and model-based methods. Signal-based damage estimation methods are generally appropriate for detection of damage location, whereas not effective for estimation of damage severities. Model-based damage estimation methods are difficult to apply directly to the structures with a large number of the probable damaged members. It is difficult to obtain the exact model representing the real bridge behavior due to the modeling errors. The modeling errors even may exceed the modal sensitivity on damage. In this study, Model-based damage detection method which can effectively consider the modeling errors is suggested. Two numerical example analyses on a simple beam and a multi-girder bridge are presented to demonstrate the effectiveness of the presented method.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.4
• /
• pp.995-1004
• /
• 2007

In this paper, we analyse online word-of-mouth and Korean box-office sales data based on kernel regression method. To do this, we consider the regression model with mixed-data and apply the least square cross-validation method proposed by Li and Racine (2004) to the model. We found the box-office sales can be explained by volume of online word-of-mouth and the characteristics of the movies.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.25-32
• /
• 2018

This paper presents an efficient software reliability testing method for the model based auto-generated code and reify a dynamic test procedure. The benefits of executing the model-based each static/dynamic reliability test before the code-based static/dynamic reliability test are described. Also, The correlations of code/model based reliability test are demonstrated by using model testing tool, Model Advisor and Verification and Validation, and the code testing tool, PolySpace and LDRA. The result of reliability test is indicated in this paper.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.491-500
• /
• 2016

This paper presents a highly efficient aeroelastic optimization method based on a surrogate model; the model is verified by considering the case of a high-aspect-ratio composite wing. Optimization frameworks using the Kriging model and genetic algorithm (GA), the Kriging model and improved particle swarm optimization (IPSO), and the back propagation neural network model (BP) and IPSO are presented. The feasibility of the method is verified, as the model can improve the optimization efficiency while also satisfying the engineering requirements. Moreover, the effects of the number of design variables and number of constraints on the optimization efficiency and objective function are analysed in detail. The accuracy of two surrogate models in aeroelastic optimization is also compared. The Kriging model is constructed more conveniently, and its predictive accuracy of the aeroelastic responses also satisfies the engineering requirements. According to the case of a high-aspect-ratio composite wing, the GA is better at global optimization.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.71-76
• /
• 2020

In this paper, we propose a super-resolution method that reconstructs compressed low-resolution images into high-resolution images. We propose a CNN model with a small number of parameters, and even if quantization is applied to the proposed model, super-resolution can be implemented without deteriorating the image quality. To further improve the quality of the compressed low-resolution image, a new degradation model was proposed instead of the existing bicubic degradation model. The proposed degradation model is used only in the training process and can be applied by changing only the parameter values to the original CNN model. In the super-resolution image applying the proposed degradation model, visual artifacts caused by image compression were effectively removed. As a result, our proposed method generates higher PSNR values at compressed images and shows better visual quality, compared to conventional CNN-based SR methods.

• Journal of ILASS-Korea
• /
• v.20 no.1
• /
• pp.53-58
• /
• 2015

In this study, we prepare the Ag nanofluids synthesized by the chemical reduction method and measure the extinction coefficient of those nanofluids at a wavelength of 632.8 nm. The Ag nanofluids are synthesized by the chemical reduction method using silver nitrate ($AgNO_3$) and sodium borohydride ($NaBH_4$) in water and ethylene glycol (EG). For stable dispersion of Ag particles in the base liquids, polyvinyl pyrrolidone (PVP) is added as a surfactant. The extinction coefficient of manufactured Ag nanofluids is measured by an in-house developed measurement system at the wavelength of 632.8 nm. The results show that the extinction coefficient of water-based and EG-based Ag nanofluids is linearly increased with respect to the particle loadings. Moreover, it is shown that the extinction coefficient of EG-based Ag nanofludis is higher than that of water-based Ag nanofluids. Finally we compare the experimental results with both the Maxwell-Garnett model and Rayleigh scattering approximation model, and they demonstrate that the Rayleigh scattering approximation model is reasonably predict the extinction coefficient of Ag nanofluids using hydraulic diameter of silver nanoparticle.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.43-49
• /
• 2015

Most of agricultural structures located in seashore could not avoid rapid deterioration of concrete because chloride-ion and $CO_2$ gradually penetrate into concrete. However, since most of models can be able to describe the phenomenon of penetration by using one or two dimensional models based on finite difference method (FDM), those modes can not simulate the real geometry and it takes a lot of computational time to complete even the calculation. To overcome those weaknesses, three dimensional numerical model considering time dependent variables such as surface concentration of chloride and diffusion coefficient of domain based on finite element method (FEM) was suggested. This model also included the neutralization occurred by the penetration of $CO_2$. Because the model used various sizes of tetrahedral mesh instead of equivalent rectangular mesh, it reduced the computational time to compare with FDM. As this model is based on FEM, it will be easily extended to execute multi-physics simulation including water evaporation and temperature change of concrete.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.389-398
• /
• 2020

Test cases in the existing weapon system software were created manually by the tester analyzing the test items defined in the software integration test procedure. However, existing test case generation method has two limitations. First, the quality of test cases can vary depending on the tester's ability to analyze the test items. Second, excessive time and cost may be incurred in writing test cases. This paper proposes a method to automatically generate test cases based on the requirements model and specifications to overcome the limitations of the existing weapon system software test case generation. Generate test sequences and test data based on the use case event model, a model representing the requirements of the weapon system software, and the use case specification specifying the requirements. The proposed method was applied to 8 target models constituting the avionics control system, producing 30 test sequences and 8 test data.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1150-1159
• /
• 2000

This paper presents an automatic text categorization model that improves the accuracy by combining statistical and knowledge-based categorization methods. In our model we apply knowledge-based method first, and then apply statistical method on the text which are not categorized by knowledge-based method. By using this combined method, we can improve the accuracy of categorization while categorize all the texts without failure. For statistical categorization, the vector model with Inverted Category Frequency (ICF) weighting is used. For knowledge-based categorization, Phrasal Patterns and Keyword Sets are introduced to represent sentence patterns, and then pattern matching is performed. Experimental results on new articles show that the accuracy of categorization can be improved by combining the tow different categorization methods.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.4
• /
• pp.283-297
• /
• 2007

Seamless data integration in the CAx chain of the CAD/CAPP/CAM/CNC has been achieved to a high degree, but research concerning the transfer of data from conceptual sketches to a CAD system should be carried out further. This paper presents a method for reconstructing a 3D model from a freehand sketch. Sketch-based modeling research can be classified into gestural modeling methods and reconstructional modeling methods. This research involves the reconstructional modeling method. Here, Mitani's seminal work, designed for box-shaped 3D model using a predefined template, is improved by leveraging a relational template and specialized for automotive design. Matching between edge graphs of the relational template and the sketch is formulated and solved as the assignment problem using the feature vectors of the edges. Including the stroke preprocessing method required to generate an edge graph from a sketch, necessary procedures and relevant techniques for implementing the template-based modeling method are described. Examples from a working implementation are given.